All Other Vehicle Stuff



Traxxas Standard Size Body Clips (12) **

Traxxas Standard Size Body Clips (12) **

$ 2.00 Save $ 1.00

This is a pack of 12 standard size body clips for Traxxas vehicles, such as the Traxxas Revo.  Compatibility: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas Revo Traxxas Rustler Traxxas Stampede

Traxxas 4mm  Aluminum Serrated Nylon Locknut (4) **

Traxxas 4mm Aluminum Serrated Nylon Locknut (4) **

$ 2.00

Lightweight and great looking, these blue-anodized-aluminum flange lock nuts are the perfect finishing touch for your serious road racer. Compatibility: (PINK)  TRAXXAS 1/16 E-REVO  TRAXXAS 1/16 SLASH  TRAXXAS 1/16 SUMMIT  TRAXXAS BANDIT Compatibility: (BLUE) Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4 Compatibility: (ALUMINUM) Traxxas Bandit Traxxas Jato Traxxas...

Options
Traxxas Heavy Duty Rear Driveshaft Assembly **

Traxxas Heavy Duty Rear Driveshaft Assembly **

$ 12.00

This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This package includes the parts needed to replace one rear driveshaft. Compatibility: Traxxas Nitro Slash Traxxas Rally Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4

Traxxas Universal Body Washers **

Traxxas Universal Body Washers **

$ 2.00

This is a pack of eight Traxxas Universal Body Washers.  Compatibility:  Traxxas 4-Tec Traxxas Bandit Traxxas E-Maxx Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Revo Traxxas Rustler Traxxas S-Maxx Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Slayer Traxxas Stampede Traxxas Stampede 4x4 Traxxas T-Maxx Traxxas Telluride 4x4

RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) **

RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) **

$ 11.99

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!  Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off...

RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash) **

RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash) **

$ 8.99

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend...

Traxxas 48P Spur Gear (90T) **

Traxxas 48P Spur Gear (90T) **

$ 3.00

This is an optional 48P 90T spur gear from Traxxas. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede

RPM Front Bearing Carrier Set **

RPM Front Bearing Carrier Set **

$ 8.99 Save $ 0.01

This is an optional RPM Front Bearing Carrier Set, and is intended for use with the Traxxas Electric Rustler, Electric Stampede, Bandit and Slash 1/10 vehicles. When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version....

Traxxas 4mm Steel Flanged Serrated Nylon Locknut (8) **

Traxxas 4mm Steel Flanged Serrated Nylon Locknut (8) **

$ 3.29 Save $ 0.06

This is a pack of eight 4mm nylon locking nuts from Traxxas. Compatibility: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas Bandit Traxxas Nitro Slash Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas Heavy Duty Front Driveshaft Assembly **

Traxxas Heavy Duty Front Driveshaft Assembly **

$ 10.00

This is a replacement Traxxas Heavy Duty Front Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This front driveshaft can be used on the left or right side of the chassis, is fully assembled and ready to install. Compatibility: Traxxas Rally Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2) **

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2) **

$ 9.99

  RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong...

JConcepts Advanced Formulated Tire Glue **

JConcepts Advanced Formulated Tire Glue **

$ 9.39 Save $ 1.61

This is a bottle of JConcepts Advanced Formulated Tire Glue. Tire gluing security is now only one step away with the release of the JConcepts Advanced Formulated Tire Glue. Available in a medium viscosity, the advanced formulated glue has proven to be a winner on and off the track with its incredible tack security, packaging and contents. The sealed package contains glue, gluing tip applicator, strip decal and desiccant pack for freshness. Gluing tires is an art form, having the...

Options
Traxxas 48P Spur Gear (86T) **

Traxxas 48P Spur Gear (86T) **

$ 3.00

This is an optional 48P 86T spur gear from Traxxas. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede

Traxxas 3x12mm Shoulder Screws (Ultra Shocks) (6) **

Traxxas 3x12mm Shoulder Screws (Ultra Shocks) (6) **

$ 3.00

This is a pack of six replacement Traxxas 3x12mm Shoulder Screws. These are the screws used with Traxxas Ultra shocks.  Compatibility: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas T-Maxx Traxxas Telluride 4x4

RPM Slash 4x4 Rear Bearing Carrier Set (2) **

RPM Slash 4x4 Rear Bearing Carrier Set (2) **

$ 10.99

This is a optional RPM Rear Bearing Carrier Set, and are intended for use with the Traxxas Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! The newest muscle-laden product from RPM is a rear bearing carrier for the Slash 4x4. The stock version simply can’t handle Short Course carnage like RPM products can. The RPM version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the...

Traxxas Body Clips (angled, 90-degrees) (10) **

Traxxas Body Clips (angled, 90-degrees) (10) **

$ 3.00

This is a pack of 10 small size body clips for Traxxas vehicles, such as the Traxxas Revo. These are the really small clips used to clip the radio tray assembly together and hold on the fuel tank. Compatibility: Traxxas Nitro Slash Traxxas Rally Traxxas Revo Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas 48P Spur Gear (83T) **

Traxxas 48P Spur Gear (83T) **

$ 3.00

Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.  Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede Traxxas Telluride 4x4

Traxxas Steering Blocks (2) (VXL) **

Traxxas Steering Blocks (2) (VXL) **

$ 3.00

This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles. Compatibility: Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Slash Traxxas Stampede

Traxxas E-clips/C-rings/Body Clips **

Traxxas E-clips/C-rings/Body Clips **

$ 2.00

This is a pack of misc Traxxas E-clip, C-rings and body clips for the Traxxas Revo monster trucks. Compatibility: Traxxas Nitro Slash Traxxas Revo Traxxas Rustler Traxxas Slash Traxxas Stampede

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (23T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (23T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Traxxas Suspension Arm (2) **

Traxxas Suspension Arm (2) **

$ 10.00

This is a pack of two replacement Traxxas Suspension Arms. These arms are used in the front and rear positions, as well as the left and right side.  Compatibility:  TRAXXAS TELLURIDE 4X4

Traxxas Aluminum Ultra Shock Cap (Blue) (4) **

Traxxas Aluminum Ultra Shock Cap (Blue) (4) **

$ 14.00

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra Shocks—Slash, Bandit, Nitro Sport, Stampede series, Rustler series, and all Maxx trucks! The machined caps fit precisely and hold tight, run after run, jump after jump. The caps install in minutes and add instant style with their rich anodized finishes in vivid red, blue or green. Each Genuine Traxxas Accessory package includes...

Traxxas 5x8x0.5mm Teflon Washers (20) **

Traxxas 5x8x0.5mm Teflon Washers (20) **

$ 2.00

This is a pack of 20 teflon 5x8x0.5mm washers for the Traxxas Revo Compatibility: Traxxas Nitro Slash Traxxas Rally Traxxas Revo Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Robinson Racing Absolute 32P Hardened Pinion Gear (15T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (15T) **

$ 5.49 Save $ 0.51

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (16T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (16T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2) **

RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2) **

$ 12.15

This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with...

Traxxas Wheelie Bar Assembly **

Traxxas Wheelie Bar Assembly **

$ 15.00

This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede

Traxxas Suspension Arms **

Traxxas Suspension Arms **

$ 10.00

This is a set of replacement Traxxas Suspension Arms, and are intended for use with the Traxxas Slash 4x4 short course truck. The suspension arms are supported on the chassis by the hinge pins and are the mounting point for the lower shock ends, as well as the axle carriers. Compatibility: Traxxas Rally Traxxas Rustler Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas XO-1

Traxxas Slipper Shaft w/Spring Pin **

Traxxas Slipper Shaft w/Spring Pin **

$ 3.00

This is a replacement slipper shaft with spring pin from Traxxas. Compatibility: Traxxas Bandit Traxxas Rally Traxxas Rustler Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas Short Rod Ends With Hollow Balls (6) **

Traxxas Short Rod Ends With Hollow Balls (6) **

$ 4.00

This is a set of six replacement short rod ends with hollow balls from Traxxas. These rod ends with hollow balls are use for the front and rear turnbuckles. Compatibility: Traxxas E-Maxx Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Revo Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4  

RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue) **

RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue) **

$ 11.99

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!  Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off...

Traxxas Heavy Duty 4x4 Rear Stub Axle Set (2) **

Traxxas Heavy Duty 4x4 Rear Stub Axle Set (2) **

$ 6.00

This is a replacement Traxxas Heavy Duty Rear Stub Axle Set, and is intended for use with the Traxxas Stampede 4x4. These can also be used as an option part for the Slash 4x4.  Compatibility: Traxxas Nitro Slash Traxxas Rally Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas Front/Rear Suspension Pin Set (8) **

Traxxas Front/Rear Suspension Pin Set (8) **

$ 4.00

This is a replacement Traxxas Front/Rear Suspension Pin Set, and is intended for use with the Traxxas Slash 4x4 and Stampede 4x4 vehicles. This package includes four inner hinge pins, and four outer hinge pins. Compatibility: Traxxas Rally Traxxas Rustler 4x4 Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Traxxas XO-1

Traxxas Complete Slipper Clutch **

Traxxas Complete Slipper Clutch **

$ 20.00

This is a replacement Traxxas Complete Slipper Clutch, and is intended for use with the Traxxas Stampede 4x4 1/10 scale truck. This slipper clutch is fully assembled and can be dropped right in the truck for a quick and easy installation.  Compatibility:  TRAXXAS RALLY  TRAXXAS SLASH 4X4  TRAXXAS SLASH 4X4 ULTIMATE  TRAXXAS STAMPEDE 4X4  TRAXXAS TELLURIDE 4X4

Traxxas Aluminum Center Driveshaft (Blue) **

Traxxas Aluminum Center Driveshaft (Blue) **

$ 10.00

This is a replacement Traxxas Aluminum Center Driveshaft, and is intended for use with the Traxxas Slash 4x4 short course truck. Compatibility:  TRAXXAS RALLY  TRAXXAS SLASH 4X4  TRAXXAS SLASH 4X4 ULTIMATE

Traxxas 12mm Hex Stub Axle Pin & Collar Set **

Traxxas 12mm Hex Stub Axle Pin & Collar Set **

$ 2.00

This is a replacement Traxxas Stub Axle Pin & Collar Set. Package includes two wheel hubs and four stub axle pins. Compatibility: Traxxas 4-Tec Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas 12mm Hex Aluminum Wheel Hub (Blue) **

Traxxas 12mm Hex Aluminum Wheel Hub (Blue) **

$ 9.00

Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to worry about the axle drive pins stripping these heavy-duty units. Key Features: Made from lightweight 6061-T6 aluminum Compatibility: Traxxas 4-Tec Traxxas Jato Traxxas Nitro 4-Tec Traxxas Rustler 4x4 Traxxas Slash 4x4 Ultimate

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (20T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (20T) **

$ 5.49 Save $ 0.51

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Extra Hard 14T Blackened Steel 32P Pinion 5mm **

Robinson Racing Extra Hard 14T Blackened Steel 32P Pinion 5mm **

$ 12.49 Save $ 0.01

Manufacturer Description This is the Extra Hard 14 Tooth 32 Pitch Blackened Finish Pinion Gearfrom Robinson Racing.FEATURES: Extra hard high carbon constructionFor use with the Robinson Racing GEN3 steel slipper unitsFits 5mm motor shaftINCLUDES: 14 Tooth 32 Pitch Blackened Finish Pinion Gear4mm Set ScrewBOX DIMENSIONS: 1.75" W. X .50" H. X 2.50" L.BOX WEIGHT: .02 LBS.

RPM Traxxas 4x4 Caster & Spindle Block Set (Black) **

RPM Traxxas 4x4 Caster & Spindle Block Set (Black) **

$ 18.50 Save $ 1.45

This is an optional RPM Traxxas 4x4 Caster & Spindle Block Set. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the call with these Caster & Steering Blocks for these awesome Traxxas trucks. Starting with a blank slate, drew in the necessary design elements and developed a design with a focus on punishment survivability. The core design...

Traxxas Screw Pin Set **

Traxxas Screw Pin Set **

$ 4.50

This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot. Compatibility: Traxxas Bandit Traxxas Nitro Slash Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede

RPM Lower Spring Cups (Black) (4) **

RPM Lower Spring Cups (Black) (4) **

$ 2.99

This is a set of four optional RPM Lower Spring Cups, and are intended for use with the shocks included with most Traxxas, Losi and Associated vehicles. These spring cups hold the base of the shock spring in place better than the stock parts and also tend to stay cleaner.  Compatibility: Losi XXX-4 Losi XXX-CR Losi XXX-NT AD2 Losi XXX-T Losi XXX-T MF2 Team Associated MGT Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas...

Traxxas Ultra Shocks (XX-Long) (Black) (2) **

Traxxas Ultra Shocks (XX-Long) (Black) (2) **

$ 18.00

This is a set of two replacement XX-long shocks from Traxxas. Includes parts to build two shocks. Compatibility: Traxxas Bandit Traxxas E-Maxx Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas S-Maxx Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas T-Maxx Traxxas Telluride 4x4

Traxxas Ultra Shocks (Long) (Gray) (2) **

Traxxas Ultra Shocks (Long) (Gray) (2) **

$ 18.00

This is a set of two replacement gray long shocks from Traxxas. Includes all parts to build two shocks. Compatibility: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas Pre-Built Center Differential Kit (Slash 4x4) **

Traxxas Pre-Built Center Differential Kit (Slash 4x4) **

$ 39.95 Save $ 5.05

Expand your competitive edge! The optional Center Differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The differential is sealed, and can be adjusted by using different fluid viscosities for specific driving conditions. The center differential is fully assembled and pre-filled, and your vehicle's modular design allows you to install the diff in just minutes. Compatibility: Traxxas Rally Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Telluride 4x4

Traxxas Aluminum Steering Blocks w/Ball Bearings (Blue) (2) **

Traxxas Aluminum Steering Blocks w/Ball Bearings (Blue) (2) **

$ 30.00 Save $ 5.00

This is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, and support the front axles. Compatibility: Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Slash Traxxas Stampede