Scale Accessories

This Yeah Racing Crawler Steel Chain is 96cm long (or about 37.8 inches) and is great for many scale crawler applications. The chain comes in black color, with two included heavy duty red hooks to strap down cargo in your roof rack, strap down the spare tire or for pulling out your buddy during rescue missions.

This chain is also available in silver color (YEA-YA-0357). 

Compatibility:

(Black)

• Axial SCX10
• Axial SCX10 II
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

(Silver)

• Axial SCX10
• Axial SCX10 II
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

This is an optional RC4WD "Warn" 9.5cti 1/10 Scale Winch. With one of the most iconic names in off-road, this winch offers ultra scale looks, and superior quality and craftsmanship. Officially Licensed by Warn.

Features:

• Cast Aluminum Case
• Stamped Steel Components
• Working Spring Loaded Warn Hook
• Synthetic Winch Rope
• Highly Detailed
• Full Warn Decals Installed
• Voltage: 6v to 11.1v
• Can operate on 3 Cell Lipo
• Easily Rebuildable
• 3ft/.9M Rope Pre-Installed
• Same Mounting Locations as Bulldog Winch
• Load Limits: Dead Lift 6.6lbs/3kgs
• Load Limits: Rolling Drag 9lbs/4.1kgs
• 30 Day Warranty

Specifications: 
Length: 2.9in / 73.68mm 
Total Width: 1.25in / 31.75mm 
Height: 1.31in / 33.56mm 
Weight: 2.1oz / 60g

Includes:

• (1) RC4WD 1/10 Warn 9.5cti Winch
• (4) M2.5x4mm SHCS (Black) (RC4ZS0760)
• (4) M2.5x6mm SHCS (Black) (RC4ZS0855)
• (1) Warn Decal Sheet

Needed To Complete:

• RC4WD Warn 1/10 Wireless Remote/Receiver Winch Controller Set (RC4ZS1092)
• RC4WD Wired Winch Control Unit (RC4ZS1089)

Notes:

• This winch requires a control unit. RC4WD offers both a wired (uses your radio's third channel) and wireless unit (hooks directly to a battery).
• This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
• Same mounting points as our Bulldog winches.
• Dead Lift is defined as the winch lifting a product from a higher position with no help from the product being lifted.
• Rolling Drag is defines as a truck using its rolling force to help the winch pull a truck or products weight.

Compatibility:

• Traxxas TRX-4

This is the RC4WD "Warn" Wireless Winch Remote and Receiver Unit. This Warn Wireless Winch Controller Set is Officially Licensed by the Warn Industries and are only available from RC4WD.

Features:

• 2.4 GHz Technology
• Over 10ft Range
• Batteries Included
• Small Compact Size
• 2- and 3-cell LiPo Compatible
• Operating Voltage 6V to 11.1V
• Easy Plug and Play

Specifications: 
Remote: 

• Total Length: 2in / 50.5mm
• Total Width: 1in / 25mm
• Height: 0.53in / 13.5mm
• Weight: 0.38oz / 11g

Receiver: 

• Length: 1.6in / 40.4mm
• Width: 1.2in / 30.2mm
• Height: 0.37in / 9.4mm
• Weight: 0.5oz / 14g

Wires: 

• Length: 6in / 150mm
• Wires Weight: 0.14oz / 4g

Compatibility:

• Traxxas TRX-4

The Scale By Chris Jack Stand is a 3D printed miniaturized replica that adds that functions as good as it looks. These jack stands feature a 35x35mm footprint at the base and a nice large cradle to hold the axle securely. The stand can be adjusted from 44mm to 75mm in height using a simple body clip retainer system, and work well with both 1.9 and 2.2 size rigs. 

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Vaterra Ascender

The Traxxas TRX-4 Rigid LED Lightbar is an officially licensed light bar developed specifically for the Traxxas Defender body (TRA8011), and features 72 LEDs with a built in on/off switch. Light bar requires the Traxxas TRA8028 power supply. 

Designed to the rigorous standards of both Traxxas and leading lighting manufacturer RIGID, the LED light bar utilizes surface mount LED technology and a custom clear lens for unsurpassed realism. The integrated switch controls the brightness of both the light bar and the headlights. The light bar bolts directly to the Land Rover Defender ExoCage, but the universal mounting tabs also allow easy custom installation on a variety of surfaces.  

Compatibility:

• TRAXXAS TRX-4

This is a pack of two Yeah Racing 1/10 Scale Heavy Duty Crawler Shackles, with included Mounting Brackets and hardware. These scale shackles securely connect to the bracket base with a scale shoulder screw, allowing the shackle free movement when connected. The mounting base connects to your bumper with four screws and nuts, all included (you may need to drill holes in your bumper).  

These shackles are made from heavy duty steel and painted with a red finish for ultimate scale detail. Once installed, these shackles are a great mount to connect hooked rope, hooked chain, or any other type of cable that is useful for the long trail ahead.

This shackle and mount set is also available in black (YEA-YA-0378). 

Compatibility:

• Axial SCX10
• Axial SCX10 II
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

The Pro-Line 5" Curved Super-Bright LED Light Bar Kit features 26 LED bulbs and has been pre-wired with a 12” long cable that can plug directly into your receiver for power. The Lights are rated for 6V to 12V power, so you also have the option to plug directly into a 3S lipo power source for incredibly bright LED Light!

The LED Lights are housed in a durable Black Nylon housing branded with a P-L logo and includes the mounts and hardware you need to do a custom install on your Rock Crawler, Rock Racer, Short Course Truck or 1/8 MT. Night Crawling has become the cool thing to do with your scale rig, don’t get left in the Dark!

• Real, working LED Light Bar Kit
• 26 Super-Bright LED’s that can handle 2S or 3S Lipo Power
• Can plug directly into your receiver plug for easy install
• Includes Mounts and Hardware for custom install on your favorite scale vehicle
• Fits Today’s Hottest Rock Crawlers, Rock Racers, Short Course Trucks and 1:8 MT’s
• Made from Black Nylon plastic for durability and scale appearance
• 5" Curved LED Light Bar for Maximum Scale Appearance

• (1) 5” Curved Super-Bright LED Light Bar
• (6) Plastic Mounts
• (4) M3 x 15 BHCS
• (4) M3 Locknuts
• (4) M3 Washers
• (4) M2 x 6 SHCS

The Scale By Chris 5 Gallon Bucket is a 3D printed miniaturized replica that adds that perfect finishing touch to any build. Perfect for holding scale tools, and other accessories, this 5 gallon bucket is an awesome general accessory for the back of your truck, or inside your scale garage.

Printed at .18mm layer thickness for incredible details, with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: 

• The ends of the metal handle on the inside of the bucket may be sharp. Please use caution when putting your finger in the bucket. We recommend that you file the edges of the handle smooth to avoid injury. 
• As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

The Traxxas TRX4 Defender Led Headlight/Tail Light Kit includes two headlight pods, and two tail light pods developed specifically for the Traxxas Defender body (TRA8011). Lights require the Traxxas TRA8028 power supply. 

The LED headlight and tail light harness is a direct replacement for the factory lens components. Fourteen total bright white LEDs bring the headlights to life, while secondary lights illuminate the amber parking lights and red tail lights for a true scale look.  

Compatibility:

• Traxxas TRX-4

The Scale By Chris Small Generator is a 3D printed miniaturized replica generator that adds that perfect finishing touch to your scale project. This small size generator features hand painted control panel and fuel cap details and measures approximately 41mm deep, 30mm wide and 31mm tall. The small size generator is a perfect fit in the back of your truck and can be secured to your rig using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold it securely. The small generator also works well in your scale shop environment.  

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

 Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Vaterra Ascender

LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders)

Compatibility:

The Scale By Chris Fire Exstinguisher is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This fire extinguisher measures approximately 10x39mm and is a great way to increase the level of scale appearance in your shop, or rig. 

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Vaterra Ascender

The Scale By Chris Portable Air Tank is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale rig or garage. This air tank features gauge, hose and air nozzle details and measures approximately 50x25mm.  

Printed at .18mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• Axial Yeti
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

The Scale By Chris Propane Tank is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This white propane tank features printed handle and valve details that can be detailed to look like everyone's favorite, clean burning, efficient and long lasting gas canister. This Hank tank will look great in the back of a truggy, a body with a full depth bed, or sitting on a shelf in your scale garage! The tank measures approximately 45x28mm and can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the tank in place. 

Precision printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed. 

Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Vaterra Ascender

TRX-4 Blazer Light Kit
Ultimate Scale Looks and Rock-Solid Durability

This Yeah Racing 1/10 Scale Steel Wire Rope is approximately 105cm (41") long and includes two heavy-duty red hooks. This wire rope works great for tying down roof rack accessories, the spare tire, or for helping a buddy during a rescue mission.

Compatibility:

• Axial SCX10
• Axial SCX10 II
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Traxxas TRX-4
• Vaterra Ascender

The Scale By Chris Ammo Box is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This ammo box features handle and latch details and measures approximately 21mm deep, 10mm wide and 14.5mm tall. The box can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the item in place. 

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

 Compatibility:

• Axial RR10 Bomber
• Axial SCX10
• Axial SCX10 II
• Axial Wraith
• GMade Komodo
• GMade Sawback
• RC4WD Gelande II
• RC4WD Trail Finder 2
• Vaterra Ascender

The Pro-Line 2" Straight Super-Bright LED Light Bar Kit features 10 LED bulbs and has been pre-wired with a 12” long cable that can plug directly into your receiver for power. The Lights are rated for 6V to 12V power, so you also have the option to plug directly into a 3S lipo power source for incredibly bright LED Light!

The LED Lights are housed in a durable Black Nylon housing branded with a P-L logo and includes the mounts and hardware you need to do a custom install on your Rock Crawler, Rock Racer, 1/8 MT or 1/10 MT vehicle. The 2” LED Light Bar has also been designed to mount directly to the PRO6278-00  Overland Scale Roof Rack for an integrated scale appearance. Night Crawling has become the cool thing to do with your scale rig, don’t get left in the Dark!

 
Features: 

• Real, working LED Light Bar Kit
• 10 Super-Bright LED’s that can handle 2S or 3S Lipo Power
• Can plug directly into your receiver plug for easy install
• Includes Mounts and Hardware for custom install on your favorite scale vehicle
• Fits Today’s Hottest Rock Crawlers, Rock Racers, 1:8 MT’s and 1:10 MT’s
• Made from Black Nylon plastic for durability and scale appearance
• 2” LED Light Bar can integrate into Overland Scale Roof Rack (PRO62780-00) 

• (1) 2” Super-Bright LED Light Bar
• (6) Plastic Mounts
• (4) M3 x 15 BHCS
• (4) M3 Locknuts
• (4) M3 Washers
• (4) M2 x 6 SHCS

RC4WD 4 Channel Wireless Remote Light Controller. 

Features:

• Remote
• Over 50ft Range
• Batteries Included
• Total Length: 2.34in / 59.5mm
• Total Width: 1.34in / 34.3mm
• Weight: 0.72oz / 20.5g
• Receiver
• Waterproof
• 4 Channel Output
• Small Compact Size
• Operating Voltage 6V to 9V
• Easy Plug and Play
• Length: 2.02in / 51.2mm
• Width: 1.27in / 32.2mm
• Height: 0.55in / 14.1mm
• Wires
• Manufactured by RC4WD
• Length: 3.19in / 81.0mm
• Wires Weight: 0.21oz / 6.0g

• (1) Wireless Remote
• (1) Wireless Receiver Unit
• (1) Wireless Connector
• (1) Instruction Manual

• If for any reason you cut the wires on the control box, this will void the warranty.
• Please note that only the receiver is waterproof. Remote may be damaged if it comes in contact with water.
• Some Lipo batteries may have a higher voltage than 11.1 volts. Please be careful and check voltage before using your battery. 

Compatibility:

• RC4WD Gelande II
• RC4WD Trail Finder 2

Wired Winch Controller Unit (Miniature Scale Accessory)

Compatibility:

• Traxxas TRX-4