Racing Bodies & Wings

Drivers routinely search for the ultimate aero package on the 1/8th off-road scene and JConcepts is directly on top of the latest trends with the release of the F2I rear wing. F2I relates to Finnisher related items morphing into a 2nd generation and this new wing fits the bill perfectly. Adding the “I” relates to it being IFMAR competition legal in terms of its side-dams being large enough to comply with rules and procedure on the world-wide racing scene.

Aerodynamics are quite the buzz and the design of the wing is rather traditional with a flat base. Across the width, the 5 individual dividers add straight-line stability and connects the upper and lower deck. Drop louvers on each side split the deck-height funneling air flow through the core and up to the gurney. The industry first design featuring a built-in gurney eliminates the need to add additional pieces, hardware or items which are clumsy.

As with all JConcepts injection molded wings, the side dams are recessed for decals to rest without being exposed directly across its plane. The offset decal plane also provides some stability to the highly impacted area and removes a slight about of weight. To make mounting easier, JConcepts has added a handy grid area underneath to help position the wing side to side and fore and aft for the utmost versatility.

At the races the F2I wing debuted at The Dirt Nitro Challenge in Perris, California. The new wing sat on the TQ vehicles of Dakotah Phend (1/8th E-Buggy and 1/8th Truck) and on the all-important 1/8th Nitro buggy TQ’s vehicle, Seth VanDalen. When the dust settled, it was Ryan Maifield taking the victory in the 1/8th Truck class making the F2I wing a winner at its first event.

Features:

• JConcepts flat base, split deck design
• 5 center dividers across wing width
• Industry first built-in gurney
• Recessed, IFMAR legal side-dams
• Light-weight design and materials
• Molded grid located on the bottom to guide user attachment

This is the Pro-Line Flo-Tek Pre-Cut Fusion Short Course Body, for use with most 1/10 scale short course trucks like the Slash, Slash 4x4, SC5M, HPI Blitz, Pro-Line PRO-2, TEN-SCTE 4WD and 22SCT.

What do you get when you fuse together the best features from the most successful Short Course body of all-time (Flo-Tek) and the most aerodynamically advanced race body ever conceived (EVO)? You get the Flo-Tek Fusion Body!

The Fusion features large vent holes in the front, middle and rear for maximum protection against parachuting. The most important holes have been cut out for you! The Flo-Tek Fusion retains the aggressive fender flares and front grill from the original Flo-Tek that everyone loves. The rear end was inspired by the EVO with large openings and ideal body mounting positions for the wide variety of SC trucks on the market.

Features to the Fusion include roof vents to make it the best jumping body available and kick-ups on the roof and rear fenders to keep you glued to the surface making your SC truck easier to drive. Initial feedback from the Pro-Line Race Team drivers who have tested the Fusion say that it’s the best body they have ever used! Jump into the future with Pro-Line’s new Flo-Tek Fusion Short Course body!

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted. 

Features:

• The Next Level of Protection Against Parachuting!
• Pre-Cut to get you to the track faster than ever
• Fusion of features from Flo-Tek and EVO
• Get Better Control of your SC Truck
• Quicker Lap Times
• Made From Durable Genuine Lexan®
• Paint-then-peel Overspray Film Included
• Made in the USA, since 1982
  

Specifications:
Length: 21.5" (546mm)
Width: 9.25" (235mm)
Height: 6.0" (152mm)
Wheel Base: 12.7" (323mm)

Includes:

• Fusion Flo-Tec Body
• Window Masks
• Decal Sheet
  

Compatibility:

• HPI Blitz
• Losi 22SCT
• Losi 22SCT 2.0
• Losi TEN-SCTE
• Losi TEN-SCTE 2.0
• Losi TEN-SCTE 3.0
• Pro-Line PRO-2
• Team Associated RC10 SC5M
• Team Associated RC10 SC6.1
• Traxxas Slash
• Traxxas Slash 4x4

This is the HB Racing 1/8 Rear Plastic Wing in White color. This wing has no mounting holes and requires you to create your own. One wickerbill and hardware included.

Compatibility:

• HB Racing D817 V2
• HB Racing E817 V2

The Traxxas Slash Fox Body is factory detailed with Fox Racing livery, trimmed and ready for installation. Even the body post holes are cut, making it easy for you to give your Slash or Slash 4x4 a face lift and get it race ready fast! Package includes body and Traxxas decal sheet. 

Compatibility:

• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate

This is a Pro-Line Pre-Cut Trifecta 1/10 Buggy Wing. Pro-Line is pushing the limit of wing development by providing a Pre-Cut 1:10 Buggy Wing that will get you on the track faster than ever before. All you have to do is set the wicker height to your liking and mount the wing to your buggy! Pro-Line’s Trifecta Wing combines everything that serious buggy racers are looking for: Performance, Style & Durability.

From the moment that you put Pro-Line’s wing on your buggy you will be amazed at the increase in rear traction and high-speed stability. The wing features a stepped side wing profile to clear the rear tires but also adds much needed durability with the built in Trifecta of Wing Ridges. Speaking of durability, buggy wings take a beating with each crash so Pro-Line made the Trifecta Wing out of super thick Genuine Lexan. The Trifecta also features three dimples that hang down on each side creating a “golf ball aerodynamic effect” under the wing for added down force and reduced high speed drag. Pro-Line has also perfected the “frosted” wing look, so the Trifecta comes pre-Frosted using Pro-Lines unique process. 

Features:

• Pre-Cut for Maximum Convenience
• Unmatched combination of Performance, Style & Durability
• Clearance for Rear Tires Built In
• Made from Super Strong and Extra Thick Genuine Lexan
• Made in the USA, since 1982

Includes:

• Pre-Cut Pro-Line Trifecta Wing (1 pc)

Compatibility:

• Team Associated RC10 B6.1
• Team Associated RC10 B6.1D

This is the HB Racing 1/8 Rear Plastic Wing in Yellow color. This wing has no mounting holes and requires you to create your own. One wickerbill and hardware included.

Compatibility:

• HB Racing D817 V2
• HB Racing E817 V2

This is the HB Racing 1/8 Rear Plastic Wing in Black color. This wing has no mounting holes and requires you to create your own. One wickerbill and hardware included.

Compatibility:

• HB Racing D817 V2
• HB Racing E817 V2

This Tekno RC 1/8 High Down Force Buggy Wing is Black color and is ROAR/IFMAR legal. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking. 

This item replaces: TKR5037B – Wing (black)

Compatibility:

• Tekno RC EB48
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48
• Tekno RC ET48.3
• Tekno RC NB48
• Tekno RC NB48.3
• Tekno RC NT48
• Tekno RC NT48.3

This is a replacement Tekno RC EB410 1/10 Pre-Cut Lexan Wing. 

Compatibility:

• Tekno RC EB410
• Tekno RC EB410.2
• Tekno RC ET410

This is a replacement Traxxas Slash 4X4 Body, and will also work with the Traxxas Slayer. This body is clear and requires painting, as well as final trimming. This body includes window masks and decals. 

Compatibility:

• Slash 4X4 Ultimate
  
• Slash 4X4 VXL
  
• Slash 4X4
  
• Slash VXL
  
• Slash

JConcepts' "HF2 SCT" Low-Profile Short Course Truck Body was designed for mid-motor SCT trucks with elements that take SCT tuning to the next level. With more reliable stability, increased speeds and more cornering ability in the SCT class, JConcepts has slammed the roof on the HF2 giving racers the ability to push the limit even more than before. Effectively lowering the CG on an SCT truck is a huge advantage and once combined with optional light-weight materials, drivers can feel more confidence inspiring performance "straight outta the package."
 
Air escape details continue to be all the rage in SCT racing and the HF2 body continues the tradition of successful bodies with increased options. Full rear opening capability just behind the cab releases in the most crucial of areas. Larger and more open louvers near the tail end of the bed lend a helping hand while the front fender flares and lower windshield area maintain the tune-ability with trim lines for user preference.
 
The wheel wells are an area of focus on the HF2 body with an edgier appeal and pronounced flare to them. The openings allow for more tire clearance throughout suspension travel and also provide a little release of air during high-speed cornering. The rear number plates have been updated to accommodate the lower roof line and also detailed for appearance. Name plates remain a favorite item on JConcepts bodies and have also be lowered, angled and notched to fit into the rear bed configuration. Metric hardware and light-weight locknuts are included to mount all body included add-ons. As a bonus, the body includes an HF decal sheet for compatibility as well as window mask and customer letter to fill the accessory package.

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.
 
Features:

• JConcepts original HF2 styling
• Slammed roof, low-profile stance
• Revised, enlarged air escape passage detail
• Protruding fender flares with increased clearance
• High angle, detailed number and name plates
• Available in standard and light-weight material
• Includes Hi-Flow decal sheet, hardware and window mask

Compatibility:

• Losi 22SCT 2.0
• Team Associated RC10 SC5M

This is the Team Losi Racing Plastic 1/8 Buggy Wing. This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions. Package includes one wing, two wickerbills and hardware.

Compatibility:

• Losi 8IGHT-X
• Losi 8IGHT-XE Race

The next generation of rear wings is here, developed and manufactured by JConcepts Inc. The 7" wide S-type wing includes options not seen before on a 1/10th off-road rear wing. An extended rear gurney lip makes tuning much easier for more grip on loose surfaces. The base of the wing design is built on the popular Aero wing, but with additions that make the wing more durable, more adjustable, and ultimately a great tuning piece.

The S-type wing is a direct bolt-on for most 1/10th scale 2wd and 4wd off-road buggies. The wing features a long chord construction with reinforced ribbing in the vertical plane below the over-hanging gurney. Cut-lines and dimpled locations are positioned throughout for trim and tuning options. The 7" variant of the S-Type wing was used in competition during the 2019 IFMAR Worlds in Trencin, Slovakia for increased rear traction.

Features:

From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color.  It's easy for anyone to get instant, professional results. Traxxas ProGraphix bodies come completely trimmed with pre-drilled body post holes for easy installation. There's also a protective overspray film applied to the body. Decals also come in the kit.

Compatibility:

• Slash 4X4 Ultimate
• Slash 4X4 VXL

With the evolution of race tracks with complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance and visible bias which help steering rotation in low traction corners.

This is the JConcepts "Finnisher" Illuzion Clear Truggy Body for the Team Associated RC8T3 and RC8T3e. This Finnisher body incorporates pre-dimpled locations for one of the hottest truggies on the circuit. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core. A wide front hood scoop allows plenty of clearance for the unique RC8T3 shock geometry. The body incorporates a large center fin which begins on the roof line and finishes just past the half-way point on the bed. Extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18 wheeler.

The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum outdoor performance. The body includes champion rear name plates which provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

Features:

• Original - JConcepts Finnisher design
• Drop-on fit for the Team Associated RC8T3 | RC8T3e
• Blended wing / body design
• Includes champion name plates with mounting hardware
• Clear polycarbonate with protective film
• Window masks and Finnisher decal sheet
• 2016 ROAR National Champion

Compatibility:

• Team Associated RC8T3
• Team Associated RC8T3.1
• Team Associated RC8T3.1e
• Team Associated RC8T3e

This is the JConcepts S15 1/8 Nitro Buggy Body in Clear Lexan, for use with the HB Racing D819; as well as the D817 V2. The S15 blends performance features on the popular Silencer body with features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep rooted position allows the engine head maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the D819 and D817V2 kit variants. 

For the precise fit, the design has undergone changes to match the HB Racing chassis side-guards and body mount positioning. The S15 stance cockpit allows ample fuel tank access, a smoother high-speed windshield transition which tackles even the most high-speed conditions. The hard edged chamfering provides the classic JConcepts look while also delivering aero benefits and perfect decal positioning.

Each S15 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. 

About the Silencer body design
The Silencer body line from JConcepts is the gold standard when it comes to 1/8th off-road buggy performance. Originally crafted for the 2012 IFMAR World Championships in Buenos Aires, Argentina, the Silencer has undergone routine changes throughout the years without sacrificing performance or reliability. Over the years, the S1, as it is named, has been made available for the latest cars from Team Associated, Mugen, TLR and HB Racing.

In the hands of Ryan Maifield, the Silencer body is a champion at the toughest event in the world, The Dirt Nitro Challenge and the largest event in the world, the Psycho Nitro Blast. The Silencer is a back-to-back IFMAR World Champion utilized by David Ronnefalk (2016) and Davide Ongaro (2018). Rest assured, the Silencer body has the credentials of a champion and the team support to back it up.

Features:

• JConcepts S15 styling
• Forward cab bias, dual channeling rear escape
• Mid-body Winglets and rear stabilizer kick-up
• Cock-pit “shark fin” for added stability
• Clear polycarbonate with protective film
• Includes window mask and decal sheet

NOTE: Completed and painted model shown for illustrative purposes only and is not included.

Compatibility:

• HB Racing D817 V2
• HB Racing D819

This is an Axis Light Weight Clear Body for the Losi® Mini-B™. Now you can have a Pro-Line Axis body for your new Mini-B™ to match your 1:10 version! The all-new Axis series of race bodies is a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis features a super low-slung design with sharp lines throughout giving it an unmistakable look on the track and fits the Mini-B™ chassis perfectly. The Axis features a cab-forward design that provides enhanced steering response while the small side fins balance out the rear of the car with ideal side-bite.

Proudly Made in the USA, the Axis is made from light-weight polycarbonate material that will give you an edge over the competition because it is 40% lighter than the stock body! Included with the body is a miniature version of the Pro-Line Air Force II rear wing that looks and performs great with the Mini-B™. Paint-then-peel overspray film, window masks and Pro-Line decals are also included. Hit the track in fresh, Pro-Line style with the all-new Axis race body for the Mini-B™!

Features:

• Designed with the Latest in CAD Technology
• Super Low-slung Design with Sharp Lines Throughout
• 40% Lighter Than the Stock Body!
• Enhanced Steering Response Combined with Ideal Side-Bite
• Fits your Mini-B™ Perfectly
• Includes Mini Pro-Line Air Force II Wing
• Paint-then-peel Overspray film Included
• Made with Crystal Clear Polycarbonate
• Four steps to Race Ready:
  1.) Clean Body and apply included window mask
  2.) Paint then peel the over-spray film off
  3.) Decal your body (decal sheet included)
  4.) Mount your new body onto your Buggy

Compatibility:

• Losi Mini-B

• Innovative design, durable material
• Industry first, forward gurney option
• Clipped rear corners minimize breakage
• Large openings for tire clearance and expansion
• Dimples for pass-through hole tuning
• Pro-level height and rake angle
• 1/10th off-road wizardry

Compatibility:

• Team Associated RC10 B6
• Team Associated RC10 B6.1
• Team Associated RC10 B6.1D
• Team Associated RC10 B64
• Team Associated RC10 B64D
• Team Associated RC10 B6D
• Team Associated RC10 B74

Drivers routinely search for the ultimate aero package on the 1/8th off-road scene and JConcepts is directly on top of the latest trends with the release of the F2I rear wing. F2I relates to Finnisher related items morphing into a 2nd generation and this new wing fits the bill perfectly. Adding the “I” relates to it being IFMAR competition legal in terms of its side-dams being large enough to comply with rules and procedure on the world-wide racing scene.

Aerodynamics are quite the buzz and the design of the wing is rather traditional with a flat base. Across the width, the 5 individual dividers add straight-line stability and connects the upper and lower deck. Drop louvers on each side split the deck-height funneling air flow through the core and up to the gurney. The industry first design featuring a built-in gurney eliminates the need to add additional pieces, hardware or items which are clumsy.

As with all JConcepts injection molded wings, the side dams are recessed for decals to rest without being exposed directly across its plane. The offset decal plane also provides some stability to the highly impacted area and removes a slight about of weight. To make mounting easier, JConcepts has added a handy grid area underneath to help position the wing side to side and fore and aft for the utmost versatility.

At the races the F2I wing debuted at The Dirt Nitro Challenge in Perris, California. The new wing sat on the TQ vehicles of Dakotah Phend (1/8th E-Buggy and 1/8th Truck) and on the all-important 1/8th Nitro buggy TQ’s vehicle, Seth VanDalen. When the dust settled, it was Ryan Maifield taking the victory in the 1/8th Truck class making the F2I wing a winner at its first event.

Features:

• JConcepts flat base, split deck design
• 5 center dividers across wing width
• Industry first built-in gurney
• Recessed, IFMAR legal side-dams
• Light-weight design and materials
• Molded grid located on the bottom to guide user attachment

The Losi Mini-T 2.0 Clear Body Set is an optional accessory for the Mini-T 2.0, and is exactly what you need to set your ride apart from the rest. Package includes pre-cut clear body, wing, decal sheet, body clips and hardware.

Compatibility:

• Losi Mini-T 2.0

The F2 body by JConcepts has been a trend setting design since its release on the buggy population. Now, Stadium Truck racers can drop-on a race favorite design to the highly anticipated Team Associated T6.1. As they say, the slate was once again swiped clean and the F2 was a ground up form started in the computer and ultimately finished by hand. 

One of the key features is an arrow based design where the front is much narrower than the rear. While viewed from the top down, the F2 body has increased clearance in the front-end for tires shown to rub against the stock body during hard cornering or while running in high-traction conditions.

The narrower front-end appears on-point and with an all-new grille and headlight layout with 4 included grille options. The imprint of the nose draws in the truck enthusiast without giving up on the futuristic twist and Finnisher heritage. Protecting the front shock tower area is done with a traditional shape but contains new louver positioning and available air-release features located just in front of the main cab.

The cab is important, not only for performance but to set off the F2 design with angular roof and parallel window design. The popular dual side-window treatment has been once again incorporated into the design for maximum coverage. The new body includes the traditional Finnisher “V step-downs” in the bed area which makes it identifiable to the savvy racer.

Rear shock tower humps allow plenty of clearance for a front or rear shock configuration which is a common adjustment on the T6.1 race truck. The tail of the body has been lowered with an upper and lower transition making the rear a more durable piece even with light-weight materials. The F2 includes two spoilers, one for high-bite conditions and another taller version for low or medium bite conditions. The spoilers are durable and with proper trimming and included hardware bolt directly to the back of the new shell.

Wheel wells can make or break a truck body and the F2 delivers on smaller openings which have shown to close-up the body and minimize air-draft inside while turning and jumping. A slight flare to each gives some structure and rigidness to the panels and fine details the design. Between the wheel wells an F2 specific, double drop treatment has been chiseled and tucked into the hourglass shape of the rear-end. The double drop blends into a rocker panel body line which provides some stability to the layout and provides that all-important chassis clearance. 

Each package includes window mask, new F2 specific decal sheet, two rear spoiler options and mounting hardware. The product is always backed by JConcepts customer service, supported and used trackside by our world-wide racing team and developed by professionals with style and authenticity. 

Features:

• Original - JConcepts F2 design 
• Blended wing / body design 
• Includes two rear spoilers
• Clear polycarbonate with protective film 
• Window masks and F2 decal sheet

Compatibility:

• Team Associated RC10 T6.1
• Team Associated RC10 T6.2

This is the optional Team Associated Clear Body. This is the "standard" weight body. Package includes body with factory applied overspray film, and window masks. 

Compatibility:

• Team Associated RC10 B74

This is the Team Losi Racing Plastic 1/8 Buggy Wing. This wing features a wickerbill design that provides improved air flow and allows you to increase the downforce when needed for various track conditions. Package includes one wing, two wickerbills and hardware.

Compatibility:

• Losi 8IGHT-X
• Losi 8IGHT-X Elite

This is two pack of JConcepts Tekno EB410 Aero S-Type Rear Wings in Clear Lexan. 

NOTE: Completed vehicle shown for illustrative purposes only and is not included. 

Compatibility:

• Tekno RC EB410
• Tekno RC ET410

The JConcepts Losi Mini-B "S2" Body is a performer straight out of the package, with the C|T-Type rear wing to help deliver results on any racing circuit. Slammed overall height allows the S2 to turn with a low center of mass while the progressive cab design provides front-end force for superior balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of cockpit. The dual side-window design provides traditional JConcepts.

The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days outside. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate the Mini-B lay-down transmission layout to give all out versatility.

NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.

Features:

• JConcepts original Silencer 2 styling
• Aggressive, progressive cab design
• Channeled roof with center stabilizer
• Useable side-pod vents
• Includes a C|T-Type rear wing
• Includes JConcepts decal sheet and window mask

Compatibility:

•  Losi Mini-B

This is the JConcepts B6/B6D "F2" Buggy Body with an included 6.5" Aero Buggy Wing. Cleverly named, F2, the unique design quickly raised some eyebrows during testing and proved effective on the ground and in the air. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance.

The F2 body is a drop fit for the popular Team Associated B6 and B6D buggies. Cut-lines are included on each side of the body to accommodate stand-up 3 or 4 gear and lay-down transmission layouts giving all out versatility. With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which help steering rotation in low traction corners. 

The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The front of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear which can be trimmed to allow air to escape at the top of the body.

In addition to the body, JConcepts has included two of the latest Aero rear wings used by Ryan Cavalieri, Ryan Maifield and Spencer Rivkin to a 1st, 2nd and 4th place finish at the 2017 Reedy Race of Champions.

Features:

• Original - JConcepts F2 design
• Blended wing / body design
• Includes two Aero rear wings
• Compatible with stand-up 3 and 4 gear and lay-down transmission
• Clear polycarbonate with protective film
• Window masks and decal sheet

Compatibility:

Is it time to upgrade your Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix^® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag.

Compatibility:

• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• Slash VXL
• Slash 4X4 VXL

The Pro-Line TLR 8ight-XE Axis 1/8 Electric Buggy Body was designed using the latest in CAD technology, and features a super low-slung design with sharp lines throughout giving it an unmistakable look on the track. The Axis is a cab-forward design that provides enhanced steering response while the small side fins balance out the rear of the car with ideal side-bite. The rear of the Axis body has the right amount of clearance for the motor and electronics and fits the chassis and bulkhead shape of your race buggy perfectly. To run the Axis body on the 8ight-XE electric buggy, the battery must be no taller than 39mm due to the low-slung nature of the Axis side pods.

NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. 

Features:

• Designed with the Latest in CAD Technology
• Super Low-slung Design with Sharp Lines Throughout
• Fits TLR® 8ight-XE™ Electric with LCG 4S Battery
• Enhanced Steering Response Combined with Ideal Side-Bite
• Fits your Race Buggy Perfectly
• Paint-then-peel Overspray Film Included
• Made with Crystal Clear Polycarbonate
• Made in the USA, since 1982

• (1) Axis Clear Body for TLR® 8ight-XE™
• Window Masks
• Decal Sheet

Compatibility:

• Losi 8IGHT-XE Race

The Tekno 1/8 Lightweight Buggy Wing has been designed to eliminate unnecessary material while maintaining the strength and durability Tekno is known for.

Coming in at just 41 grams, it’s the lightest molded wing on the market by nearly 10 grams. As the highest part on the vehicle, a lightweight wing improves the vehicle’s handling by lowering the center of gravity. Injection molded from a durable polymer blend and thoroughly track tested, you can be confident it will stand up to brutal race conditions. It is also ROAR and IFMAR legal without modification, uses standard mounting locations and wing buttons.

Features:

• Reduced weight to lower the center of gravity.
• Molded from durable polymer plastic.
• Meets ROAR and IFMAR rules without modification.
• Fits all Tekno RC 1/8th scale vehicles as well as many other 1/8th scale vehicles from other manufacturers.

Compatibility:

• Tekno RC EB48
• Tekno RC EB48 2.0
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48.4
• Tekno RC EB48SL
• Tekno RC ET48
• Tekno RC ET48.3
• Tekno RC NB48
• Tekno RC NB48 2.0
• Tekno RC NB48.3
• Tekno RC NB48.4
• Tekno RC NT48
• Tekno RC NT48.3

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's. 

Color Options: 

• MUGE1068: Wing (White)
• MUGE1069: Wing (Yellow)
• MUGE1070: Wing (Black) 

Compatibility:

• Mugen MBX7
• Mugen MBX7E ECO
• Mugen MBX7R
• Mugen MBX7R ECO
• Mugen MBX7T
• Mugen MBX7TE
• Mugen MBX7TR
• Mugen MBX7TR ECO
• Mugen MBX8
• Mugen MBX8 ECO
• Mugen MBX8T
• Mugen MBX8TE

This is a clear Pro-Line Baja Bug body, intended for use with the Traxxas Slash 1/10 scale short course body. The Baja Bug is back with the same style, quality, and features as it had the first time around and is now officially licensed by Volkswagen. When you’re looking to outfit your Slash with the coolest, most durable, long-lasting body shell, then check out Pro-Line's Volkswagen Baja Bug bodies.

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted. 

Special Instructions for the Slash Body: 

• Nerf bars will need to be removed if you want to run the Baja Bug Body
• Tape inside of body at chassis sides to better protect against paint damage
• Shown without bumper. Rear bumper accepted but part of engine detail will need to be removed to clear rear bumper

Slash Body features: 

• Classic VW bug styling with Baja flair
• Simulated rear engine detail just like the stock motor
• Made from durable/genuine .060 Lexan
• Achieve a new look with optional add on spoiler
• Detail decal sheet with genuine Pro-Line sponsors
• Paint-then-peel overspray film included
• Officially licensed by Volkswagen 

Compatibility:

Overview

PROTOform is proud to announce a partnership with Nissan®! This collaboration begins with bringing the car they call "Godzilla" to the No Prep RC Drag Racing scene for the first time: the Nissan® GT-R™ R35 Pro Mod.

The officially licensed body is the ultimate aerodynamic upgrade to your Losi® 22S™ No Prep Drag Car or other 13.2" wheelbase drag car. We combined the signature wide-mouth grille, side vents, and powerful stance of the R35 GT-R™ with some stretched, pro-mod drag racing proportions to transform your no-prep car into a scale-1/4-mile import beast.

The GT-R™ Pro Mod features a built-in spoiler, but for top-level Outlaw Class racers, we recommend pairing the GT-R™ with the upgrade Outlaw Wing Kit (PRM173300) for maximum stability and performance at blazing fast speeds. Just trim the rear spoiler lip off your GT-R™ and mount the wing on the conveniently marked dimples.

The Nissan® GT-R™ Pro Mod body is Made in the USA from our crystal-clear polycarbonate and includes a detailed decal sheet and window masks. Give your SC drag car the most unique look at the strip with PROTOform's Nissan® GT-R™ R35 Pro Mod!

Features

• Officially Licensed by Nissan
• State of the Art Aerodynamics
• Import Pro-Mod Styling
• Add the PRM173300 Outlaw Wing (Sold Separately) if Your Drag Car is Blazing Fast

• Paint-then-peel Overspray Film Built-in
• Made with Crystal Clear Polycarbonate
• Made in the USA, since 1982

Four Steps to Drag Race Ready

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new body onto your Drag Car

Fits

• Losi® 22S™ No Prep Drag Cars (LOS03041 & LOS03035)
• Other 13.2" Wheelbase Drag Cars

Specs

Length:

25.1" (637mm)

Width (Front):

11.0" (280mm)

Width (Rear):

11.25" (285mm)

Height:

5.85" (148mm)

Wheelbase:

13.2" (335mm)

 

Nissan Motor Co., Ltd. Trademarks, designs, copyrights and/or other intellectual property rights are under license.

This is an optional Losi Clear Mini-B Body and Wing, intended for use with the Losi Mini-B 1/16 RTR 2WD Buggy as a blank canvas for your own paint scheme. Package includes clear, pre-trimmed body with overspray film and decals.

Compatibility:

• Losi Mini-B

Tekno RC EB410 Body. This is a replacement for the Tekno EB410 4wd buggy. Package includes one clear body with factory applied overspray film. 

Compatibility:

• Tekno RC EB410

This is an optional JConcepts "F2" 4WD Clear Buggy Body for the Tekno EB410 4WD Buggy. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. The F2 body is a drop fit for the popular Tekno EB410 buggy.

With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which help steering rotation in low-traction corners.

The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear.

Let’s face it, the Tekno is unique and the form fit design for the vehicle was a ground-up design and not just a body conversion. The narrow rear of the Tekno played a roll in the look and feel, however, the JConcepts designers wanted more. The team incorporated a high-end floor feature which aggressively provides a look and feel not seen before on an RC car and reminiscent of a Formula 1 car. 

The F2 is dramatically lower in height than its competition and provides that “race” look and stance that is driver approved in competition. Special consideration was made for the steering, servo horn and front geometry to allow the body to have that drop-on fit. The EB410 kit includes a side-mount fan option which has also been taken into consideration with the F2 body design. The body includes a louver design built into the body which runs alongside the fan and scribe lines where the user can add holes for direct air circulation.

In addition to the newly designed body, JConcepts has included two of the latest S-Type Aero rear wings used by Ryan Maifield to win the 2017 IFMAR World Championships.

Features: 

• Original - JConcepts F2 design
• Blended wing / body design
• Formula 1 inspired, floor feature
• Clearance for side-mount fan
• Includes two S-Type Aero rear wings
• Clear polycarbonate with protective film
• Window masks and decal sheet

 Compatibility:

• Tekno RC EB410
• Tekno RC ET410

This is the JConcepts Clear Tekno EB48 "Finnisher" Illuzion Body. With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts has incorporated many features for the Finnisher Tekno EB48, which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during in-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners.

JConcepts hit the ground in Vaasa, Finland with an all redesigned body specifically for the IFMAR World Championships. Cleverly named, Finnisher, the unique design quickly rose to the top of the field during competition and proved effective on the ground and in the air. Designed with aspects learned from the Punisher line of bodies, the Finnisher provides an even more aggressive look with included details which remain crucial to performance. The Finnisher body for the Tekno is a drop fit for the EB48 buggy.

The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. Additional clearance has been added for the steering linkage from servo to bell-cranks to give an extra bit of clearance to the body. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which places dual louvers toward the rear that can be trimmed to allow air to escape at the top of the body. The rear portion of the side-pod area has been lowered to create another louver which can be trimmed as another avenue to allow heat to escape. The motor-side of the pods have a direct inlet which can be trimmed and used as another air-flow feature of the body.     

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted. 

Features:

• Race proven JConcepts Finnisher design
• Blended wing / body design
• Unique, stepped, forward cab design
• Side-pod louvers for more air-flow potential
• Additional steering clearance
• Motor-side scoop for direct inlet
• Clear polycarbonate with protective film
• Window masks and decal sheet

Compatibility:

• Tekno RC EB48 Original
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48.4