This is an optional Pro-Line Extended Front & Rear Body Mount Set, and is intended for use with the Traxxas Slash 4x4 short course truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The Pro-Line body mount kit includes adjustable body mounts so you can fit nearly any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

Features:

• Completely adjustable body mounts so virtually any body will fit perfectly
• Innovative screw on body mounting system
• Long body mounts included to fit Rally Car Bodies
• Made from Ultra-Durable Nylon
  

Includes:

• Body Mounts and Posts (Front & Rear)
• Mounting Hardware

Compatibility:

• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate

This is the Traxxas 2-speed servo mount set.

Includes:

• Servo mount
• T-Lock
• Wire clips

For the TRX4

This is a Traxxas Traxxas "Series 1" 6 Cell Pack. Traxxas sets the standard for engine-starting ease and convenience with its innovative EZ-Start system. By simply pressing a button, the EZ-Start unit lights the engine’s glow plug and powers the on-board starter motor for fast, fool-proof ignition. For best EZ-Start performance at a highly economical price, Traxxas offers the Power Cell 6-cell 1500mAh NiMH battery pack for EZ-Start. Featuring quality construction with rugged NiMH cells, silicone-jacketed 14-gauge wire, welded tabs, and a standard Molex connector, the Power Cell EZ-Start pack installs easily in the starter unit and provides plenty of capacity for all day starting power on a single charge.

Features:

• Standard Molex Connector
• 14-gauge wires with flexible silicone insulation resist damage and allow easy installation
• Rugged NiMH cells charge safely, are recyclable, and provide ample starting capacity for all-day fun
• Optimized for maximum performance with the Traxxas EZ-Start system

Compatibility:

• Traxxas Nitro Slash

This is a replacement Traxxas "Series 1" 6-Cell 1/16 Battery with Traxxas iD Connector. Traxxas iD Power Cell NiMH batteries are available in standard, 6-cell "flat" configuration, as well as 7-cell flat and "hump"-style packs to fit all Traxxas models. NiMH batteries are the standard battery type for radio control, and iD-equipped Power Cell NiMH packs are included with Traxxas electric models for excellent runtime and power delivery. Traxxas Power Cell Series 4 and 5 NiMH batteries offer increased capacity for even greater runtime and higher sustained voltage under load.

Features:

• High-current connector
• Gold-plated copper terminals
• High-efficiency 16-gauge silicone jacketed wire 

Compatibility:

• LaTrax 1/18 Rally
• LaTrax 1/18 SST
• LaTrax 1/18 Teton
• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit

This is a replacement one way starter bearing from Traxxas. This bearing goes onto the crankshaft at the rear of the motor.

Compatibility:

• Traxxas Nitro Stampede

This is a Traxxas .8 Mod (32 Pitch), 50 Tooth Spur Gear. 

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

This is a Traxxas .8 Mod (32 Pitch), 52 Tooth Spur Gear. 

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

The E-Revo VXL is built on the race-winning, track-proven innovation of the Revo and E-Revo models. The Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with all its functionality and performance intact, right down to the oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. Intricately molded as a single piece, the monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. In 1/16 scale, it is an even more impressive achievement of packaging and performance optimization that could only come from Traxxas, The Fastest Name In Radio Control^®.

• Traxxas Stability Management^TM
• Traxxas Power Cell NiMH battery with iD^®
• 2-amp DC Peak Detecting Fast Charger
• TQi 2.4GHz transmitter and receiver
• 30+mph with included NiMH battery
• 50+mph with additional NiMH battery
• Revo suspension technology for superior handling and control
• Full-time 4WD
• Velineon^® 380 brushless motor—largest in class
• Waterproof electronics
• Torque-control™ slipper clutch
• Sealed differentials
• Realistic all-terrain tires with foam inserts

Some mini-models are "fast for a mini." That's not good enough for Traxxas. The 1/16 E-Revo VXL is just plain fast. At 30+mph with the included 6-cell NiMH battery, E-Revo VXL is nearly twice as fast as most mini models, and faster than most electric RTR trucks of any scale. Install a second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and E-Revo VXL jumps to over 50mph. No other RTR truck, regardless of scale, makes it so easy and affordable to experience this level of high speed and wheelie-popping power.

Built specifically for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon^® 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built to the same no-compromise specs as the Velineon 3500 found in Traxxas' 70+mph 1/10 scale VXL models. High-speed ball bearings. Sintered rotor. Neodymium magnets. Gold plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed!

The 1/16 E-Revo VXL is fully assembled with TQi radio system, Velineon brushless power system, painted and decaled body, pre-glued tires, and quick start guide. A Traxxas Power Cell NiMH battery and charger are also included, making the E-Revo VXL truly Ready-To-Race. Traxxas backs the E-Revo VXL and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows the E-Revo to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your RC experience is easy and fun (and fast!).

MODEL 71076-3: Fully assembled, Ready-To-Race^® with Traxxas Stability Management^®, TQi 2.4GHz radio system, Velineon^® 380 motor, VXL-3m electronic speed control, 7.2 volt NiMH battery, 2-amp peak detecting fast charger, and ProGraphix^® painted body.

The unique patented Traxxas adjustable wheelie bar features four position adjustment, now in 1/16 scale. The 1/16 E-Revo wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The wheelie bar can be removed easily for off-road racing or jumping.

Compatibility:

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Summit

The E-Revo VXL includes a black High-Downforce Wing as standard equipment; to personalize and customize the look of your machine, the wing is also offered in Bright White and Traxxas’ exclusive Exo-Carbon finish for the high-tech look of carbon fiber with the light weight and crash resistance of flexible plastic. Side-dam decals and Traxxas logos are also included.

Compatibility:

• Traxxas 1/16 E-Revo

Traxxas 1/16 Wing Mount Set

Compatibility:

• Traxxas 1/16 E-Revo

Ball bearings, black rubber sealed (10x15x4mm) (2)

Compatibility:

• Traxxas Maxx
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas TRX-4
• Traxxas TRX-4
• Traxxas Telluride 4x4

This is a pack of ten replacement Traxxas 10° TRX-4 Angled Rod Ends. 

Compatibility:

• Traxxas TRX-4

Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to worry about the axle drive pins stripping these heavy-duty units.

Key Features:

• Made from lightweight 6061-T6 aluminum

Compatibility:

• Traxxas 4-Tec
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

These cool, 5-spoke chrome wheels can be used to replace the dished wheels on older models. The TRX Pro-Star wheels feature a chrome-less gluing surface for secure tire bonding and have an awesome, mirror-like finish that's second to none. The wheels are standard size, so they will accept any 2.2-inch on or off-road tire combination. The wheels are also lightweight and durable, so there's no compromising on performance.

Compatibility:

• Traxxas Jato
• Traxxas Nitro Rustler
• Traxxas Nitro Stampede

This is a set of replacement blue rubber shielded 12x18x4mm ball bearings for Traxxas vehicles.

•  TRAXXAS E-REVO VXL 2.0
•  TRAXXAS RALLY
•  TRAXXAS REVO
•  TRAXXAS RUSTLER 4X4
•  TRAXXAS SLASH 4X4
•  TRAXXAS SLASH 4X4 ULTIMATE
•  TRAXXAS STAMPEDE 4X4
•  TRAXXAS TELLURIDE 4X4
•   TRAXXAS X-MAXX
•  TRAXXAS XO-1

This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Blue anodize. Also included are four 4x5mm set screws and four 3x14mm pins.

Compatibility:

• Traxxas E-Revo VXL 2.0
• Traxxas Maxx

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment and unsurpassed torque handling, the splined design interlocks with Traxxas 17mm splined wheels. The ground-breaking design also accepts

Compatibility:

• Traxxas E-Maxx
• Traxxas E-Revo
• Traxxas Revo
• Traxxas Summit
• Traxxas T-Maxx

Body, Chevrolet Blazer (1979), complete (red) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals)

Compatibility:

• Traxxas TRX-4

Traxxas Stability Management (TSM) Makes You Faster

Traxxas Stability Management^® (TSM) lets you experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control on slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. Go ahead, punch it off the line! TSM senses the vehicle’s direction and makes steering corrections to provide straight-ahead full-throttle acceleration without fishtailing or spinouts. When cornering, TSM intuitively corrects the vehicle’s line for faster exit speeds. TSM also improves braking by keeping the vehicle arrow straight until you reach a complete stop.

No Unwanted Side Effects or Disconnected Feel

TSM lets you enjoy all the benefits modern electronic stabilization without intruding on your driving fun or introducing unwanted side effects. Traxxas engineers developed superior tuning algorithms that run on high-speed, precision electronic components to create a system that works invisibly, in the background, without ever limiting your throttle. TSM delivers sharp and precise reactions, rather than a dull, disconnected feel. TSM can be fine-tuned (or turned off) for different surfaces by adjusting the multi-function knob on the TQi transmitter, or by adjusting the slider in the Traxxas link app. Drive faster, with more ease, and have more fun! In fact, you may not even realize how much TSM is helping you until you try to drive without it!

How Does TSM Work?

TSM lives in the receiver and works with TQi transmitters equipped with a Multi-Function knob. It does not require any additional setup or configuration from the driver. The Multi-Function knob adjusts the amount of assistance provided by TSM. More assistance tightens the control, virtually eliminating fishtailing and sliding. Less assistance allows the vehicle to be more loose for controlled power slides and “steering” with the throttle. TSM never restricts throttle input. The driver always has complete control of the power. TSM can easily be turned off by simply turning the multi-function knob counterclockwise to its stop. TSM can also be adjusted in the Traxxas Link application. The control icon is in the “Garage” in Traxxas Link and also the Drive Effects screen. Each model has a specific software load, custom tuned to the model. Traxxas Link remembers TSM setting when the driver uses the same transmitter and switches between various models equipped with TSM.

TSM Feature	Traxxas Stability Management	Other Systems
Engineered to work seamlessly in the background
Unrestricted throttle control
Unrestricted turning radius
Arrow straight braking control to a complete stop
Allows user to adjust assistance or turn off during driving
Connected driver feel

Have extra tires on hand!

While our mission at Traxxas is to build our vehicles tough to resist breakage and wear, if you like to pull the throttle trigger hard and often, expect some increased tire wear. Normally, without TSM, it can be difficult to hold full throttle for extended lengths of time, particularly when the vehicle is configured with brushless power and 3S LiPo batteries. Drivers naturally tend to back off the throttle to maintain control, which reduces tire wear. However, TSM opens the door for full throttle acceleration on practically any surface and simply-put, if you like to lay down the rubber, the tires don’t stand a chance. Keep an extra set handy, particularly if you’re driving on asphalt and concrete.

This is a replacement Traxxas Plastic Servo Gear Set for use with the Traxxas 2070 and 2075 servos. Also included are two bearings.

This is a replacement Traxxas Digital High Torque Waterproof Servo.

Specifications: 
Torque: 125 oz-in 
Speed: 0.17 sec/60° 

Compatibility:

• Traxxas E-Revo VXL 2.0
• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Spartan
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas Villain EX
• Traxxas XO-1

Compatibility:

• Traxxas E-Revo VXL 2.0
• Traxxas Rustler 4x4
• Traxxas TRX-4
• Traxxas TRX-4
• Traxxas Unlimited Desert Racer

This is a replacement Traxxas 2085 Digital High Torque Waterproof Servo, mounted for the X-Maxx Monster Truck. 

Compatibility:

• Traxxas X-Maxx

Traxxas 20x27x4mm Ball Bearings. Package includes two black rubber seal bearings.

Compatibility:

• Traxxas X-Maxx

This is a replacement 22T steel top drive gear from Traxxas.

 Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is the Traxxas 2S, 7.4V, 2200mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!

Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.

High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.

With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.

The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.

NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.

Features:

• Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
• Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
• Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
• Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
• Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
  
• Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
• Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!

Specifications:
Type: LiPo
Total Capacity: 2200
Voltage: 7.4
Continuous Discharge: 25C (55A)
Max Burst Rate: 50C (110A)
Watt Hours: 16.28
Max Charge Rate: 1C (2.2)
Dimensions: 88x21x30mm
Weight: 4.2oz (118g)

CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.

Compatibility:

• Losi Mini 8IGHT
• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas TRX-4
• Traxxas TRX-4

This is the Traxxas 2S, 7.4V, 5800mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!

Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.

High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.

With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.

The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.

NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.

Features:

• Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
• Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
• Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
• Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
• Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
  
• Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
• Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!

Specifications:
Type: LiPo
Total Capacity: 5800
Voltage: 7.4
Continuous Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Dimensions: 137x25x43mm
Weight: 10.9oz (308g)

CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger.

Compatibility:

• Traxxas 1/8 Funny Car
• Traxxas 4-Tec 2.0
• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas E-Revo
• Traxxas E-Revo VXL 2.0
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Spartan
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Summit
• Traxxas TRX-4
• Traxxas TRX-4
• Traxxas Unlimited Desert Racer
• Traxxas X-Maxx
• Traxxas XO-1

This is a replacement 30T steel transmission idler gear from Traxxas. 

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede