Other Vehicle Parts

This is a pack of 12 heavy duty size body clips for Traxxas vehicles, such as the Traxxas Revo.

Compatibility: 

• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas XO-1

Lightweight and great looking, these blue-anodized-aluminum flange lock nuts are the perfect finishing touch for your serious road racer.

Compatibility: (PINK)

•  TRAXXAS 1/16 E-REVO
•  TRAXXAS 1/16 SLASH
•  TRAXXAS 1/16 SUMMIT
•  TRAXXAS BANDIT

Compatibility: (BLUE)

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Compatibility: (ALUMINUM)

• Traxxas Bandit
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Slash
• Traxxas Nitro Sport
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Spartan
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Compatibility: (GREEN)

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Grave Digger
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede
• Traxxas Telluride 4x4

This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This package includes the parts needed to replace one rear driveshaft.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

This is a pack of eight Traxxas Universal Body Washers. 

Compatibility: 

• Traxxas 4-Tec
• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler
• Traxxas S-Maxx
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Slayer
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

This is an optional 48P 90T spur gear from Traxxas.

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

 

Key Features

Overview

Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit)

Compatibility:

• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a pack of six replacement Traxxas 3x12mm Shoulder Screws. These are the screws used with Traxxas Ultra shocks. 

Compatibility:

This is an optional RPM Front Bearing Carrier Set, and is intended for use with the Traxxas Electric Rustler, Electric Stampede, Bandit and Slash 1/10 vehicles. When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version. Improved performance, less rolling resistance and less maintenance are all characteristics you can expect from these carriers and larger bearings. 

NOTE: 5x11mm Bearings are not included with these kits (4 bearings are needed for each kit). VXL & Slash owners: Your truck comes stock with 5x11mm bearings.

Compatibility:

• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a replacement Traxxas Heavy Duty Front Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This front driveshaft can be used on the left or right side of the chassis, is fully assembled and ready to install.

Compatibility:

• Traxxas Rally
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

This is a replacement Traxxas Stub Axle Pin & Collar Set. Package includes two wheel hubs and four stub axle pins.

Compatibility:

• Traxxas 4-Tec
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.

RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra Shocks—Slash, Bandit, Nitro Sport, Stampede series, Rustler series, and all Maxx trucks! The machined caps fit precisely and hold tight, run after run, jump after jump. The caps install in minutes and add instant style with their rich anodized finishes in vivid red, blue or green. Each Genuine Traxxas Accessory package includes four shock caps.

 Compatibility:

• Traxxas 4-Tec
• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Sport
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas S-Maxx
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to worry about the axle drive pins stripping these heavy-duty units.

Key Features:

• Made from lightweight 6061-T6 aluminum

Compatibility:

• Traxxas 4-Tec
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

This is a pack of 20 teflon 5x8x0.5mm washers for the Traxxas Revo

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a replacement shock spring retainer set from Traxxas. Includes shock retainers from two shocks.

Compatibility:

• Traxxas 4-Tec
• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas S-Maxx
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

This is a optional RPM Rear Bearing Carrier Set, and are intended for use with the Traxxas Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! The newest muscle-laden product from RPM is a rear bearing carrier for the Slash 4x4. The stock version simply can’t handle Short Course carnage like RPM products can. The RPM version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier’s arm. Additionally, the bearing bores in these bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! RPM also reduced the end play of the axles by approximately 1/64”, keeping your rear end tracking perfectly like it’s supposed to.

Obviously it wouldn’t be perfect without RPM's trademark blend of nylons that make their products indestructible. These carriers are so strong (like all RPM molded products are) that they are backed with a limited lifetime warranty against breakage! If you’re tired of ending a fun day due to breakage, RPM is here to solve that problem. Check them out; you’ll be glad you did!

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Sport
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Stampede 4x4

This is a set of replacement Traxxas Suspension Arms, and are intended for use with the Traxxas Slash 4x4 short course truck. The suspension arms are supported on the chassis by the hinge pins and are the mounting point for the lower shock ends, as well as the axle carriers.

Compatibility:

• Traxxas Rally
• Traxxas Rustler
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas XO-1

Black

Key Features
Nearly 25% lighter than stock
Stronger material resists flexing and breaking
Increased clearance in outer area of arms
Overview
RPM front A-arms for the Traxxas Slash, e-Rustler & e-Stampede are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Traxxas Slash, e-Rustler & e-Stampede are sold in pairs and are available in either black or blue. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.

Specs
Material Plastic
Refinement Color Black

Blue

Key Features
Nearly 25% lighter than stock
Stronger material resists flexing and breaking
Increased clearance in outer area of arms

Specs
Material Plastic
Refinement Color Blue

Green

Key Features
Molded from trademark blend of superior nylons

Overview
Green has become a trend in recent years, both with the popularity of the Monster Energy paint scheme as well as the release of the Traxxas Monster Jam replica line up of Stampede trucks that include the Grave Digger® body with green chassis components. To help customize any green theme, RPM is proud to release several green components that have been color-matched to the stock green chassis components on the Traxxas Grave Digger® truck. These parts fit the Traxxas Monster Jam replica line-up of Stampede trucks as well as several other Traxxas vehicles.

RPM green products are molded from our trademark blend of superior nylons and are backed by our industry-leading limited lifetime breakage warranty. Not only are they great looking, like all RPM parts, they’re tough!

Specs
Material Plastic
Refinement Color Green

Pink

Red

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! 

Features:

They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.

RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!

Notes:
RPM A-arms for the Traxxas Slash are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4x4) due to strengthening designs that reduce the clearance around the rear axle.

Compatibility:

• Traxxas Rally
• Traxxas Slash 4x4
• Traxxas Stampede 4x4

This is a set of two replacement suspension king pins with e-clips from Traxxas.

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Stampede

This is a pack of two replacement Traxxas 58mm Turnbuckles. These turnbuckles come equipped with rod ends and pillow balls installed. 

Compatibility:

• Traxxas Jato
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas XO-1

This is a replacement 54T (0.8 Metric Pitch) spur gear from Traxxas. This gear mounts to the input shaft of the transmission, and meshes with the pinion gear on the clutch bell.

Compatibility:

• Traxxas Jato
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas S-Maxx
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas T-Maxx

This is a replacement Tekno RC CV Rebuild Kit, and is intended for use with the Traxxas Slash, Slash 4x4, Losi SCTE, Ten-T and 810 vehicles equipped with the optional Tekno RC M6 Driveshafts. This kit includes two barrels and two pins and will work with the following Tekno RC Driveshaft Sets; TKR6851X, TKR6852X, TKR1951X and TKR2210X. 

Compatibility:

• Losi 810
• Losi TEN-SCTE
• Losi TEN-SCTE 2.0
• Losi TEN-T
• Tekno RC EB410
• Tekno RC EB48SL
• Tekno RC ET410
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Stampede 4x4

This is a pack of misc Traxxas E-clip, C-rings and body clips for the Traxxas Revo monster trucks.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Revo
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a pack of 10 small size body clips for Traxxas vehicles, such as the Traxxas Revo. These are the really small clips used to clip the radio tray assembly together and hold on the fuel tank.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.

 Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede
• Traxxas Telluride 4x4

Overview

Please note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch. Also, RRP#1200 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.

Specs
Gear Pitch 32-Pitch
Gear Type Pinion
Material Steel
Tooth Count 14 Tooth

This is a replacement slipper shaft with spring pin from Traxxas.

Compatibility:

• Traxxas Bandit
• Traxxas Rally
• Traxxas Rustler
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Overview