Drift Parts

This is a pack of four Yeah Racing 4mm Aluminum Wheel Lock Nuts. These high precision and realistic wheel nuts are made from lightweight aluminum alloy material and then anodized with a stylish finish. All nuts feature a flanged design with a knurled serration backing for maximum locking security. 

Available colors:

• YEA-YA-0448BK: Black
  
• YEA-YA-0448LB: Blue
  
• YEA-YA-0448OR: Orange
  
• YEA-YA-0448SV: Silver
  
• YEA-YA-0448PP: Purple
• YEA-YA-0448RD: Red

Compatibility:

This is a pack of four Yeah Racing 4mm Aluminum Wheel Lock Nuts. These high precision and realistic wheel nuts are made from lightweight aluminum alloy material and then anodized with a stylish finish. All nuts feature a flanged design with a knurled serration backing for maximum locking security. 

Available colors:

• YEA-YA-0448BK: Black
  
• YEA-YA-0448LB: Blue
  
• YEA-YA-0448OR: Orange
  
• YEA-YA-0448SV: Silver
  
• YEA-YA-0448PP: Purple
• YEA-YA-0448RD: Red

Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Lazer ZX-6.6
• Kyosho Ultima RB6
• Kyosho Ultima SC6
• Losi 22 1.0
• Losi 22 2.0
• Losi 22 3.0
• Losi 22 3.0 SPEC-Racer
• Losi 22-4 1.0
• Losi 22SCT 1.0
• Losi 22SCT 2.0
• Losi 22T 1.0
• Losi 22T 2.0
• Losi TEN-SCT Nitro
• Losi TEN-SCTE
• Losi TEN-SCTE 2.0
• Losi TEN-SCTE 3.0
• MST CFX
• MST CFX-W
• MST CMX
• Team Associated RC10 B5M Factory Lite
• Team Associated RC10 B6 Original
• Team Associated RC10 B6.1
• Team Associated RC10 B6.1D
• Team Associated RC10 B6.2
• Team Associated RC10 B6.2D
• Team Associated RC10 B6D
• Team Associated RC10 F6
• Team Associated RC10 SC5M
• Team Associated RC10 T5M
• Team Associated RC10 T6.1
• Yokomo YZ-2 CA
• Yokomo YZ-2 CAL2
• Yokomo YZ-2 CAL3
• Yokomo YZ-2 DT
• Yokomo YZ-2 DTM
• Yokomo YZ-2 DTM WC
• Yokomo YZ-2 DTM2
• Yokomo YZ-2 DTM3
• Yokomo YZ-2 Original
• Yokomo YZ-2 T
• Yokomo YZ-4 Original
• Yokomo YZ-4 SF

These Yeah Racing RMX 2.0 Titanium Tie Rods are a set of titanium tie rods for the  MST's RMX2.0, helping to save some weight without sacrificing the durability. Comes with a long turnbuckle for you to install the servo parallel to the chassis as well.

Compatibility:

• MST RMX 2.0 S

MST RMX 2.0 S 48P Spur Gear. This is the stock replacement 80T spur gear. 

Compatibility:

• MST RMX 2.0 S

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over time this may cause some discoloration on the spring edges and surface. To prevent discoloration please lightly oil them with some bearing or machine oil.

Compatibility:

• Yokomo YD-2
• Yokomo YD-2

The MST RMX Rear Shaft Ball Differential Set is an upgrade for the RMX 2.0 S, as well as the RMX-D kits equipped with the optional 4WD conversion (MXS-210452).  Package includes precision machined outdrives, and the rest of the parts to build one complete ball diff with 40/13T gearing.

Compatibility:

• MST RMX 2.0 S

MST M4 Wheel Nut. These knurled steel M4 wheel nuts are a great option for any application that requires a non-locking style flanged M4 nut. Package includes four nuts.

Compatibility:

• MST CFX
• MST CFX-W
• MST CMX

MST Bevel Gear Set. This is the optional 42 tooth rear main gear and 11 tooth bevel gear for the RRX, RMX, FSX, FXX and XXX drift chassis. 

Compatibility:

• MST FXX-D
• MST RMX 2.0 S

MST Bevel Gear Set. This is the 36 tooth rear main gear and 17 tooth bevel gear used on the FXX-D chassis, but can be used as a gear tuning option on the RRX, RMX, FSX and XXX models as well. 

Compatibility:

• MST FXX-D
• MST RMX 2.0 S

MST RMX 2.0 S Front Arm Set. Package includes one front upper arm, one front lower arm and spacers that can be used on the right or left side of the chassis.

Compatibility:

• MST RMX 2.0 S

The MST 5.8x26mm Reinforced Adjuster Set is a replacement for the FXX-D and RMX 2.0 S models. Package includes four rod ends.

Compatibility:

• MST FXX-D
• MST RMX 2.0 S

MST RMX 2.0 S Ball Differential Outdrive Joint. These are the replacement outdrives for the RMX 2.0 S ball diff. Package includes two outdrives, t-nut and two spreader rings.

Compatibility:

• MST RMX 2.0 S

MST 3x16mm Set Screw. These replacement set screws are used to secure the rod ends to the suspension links. 

Compatibility:

• MST CFX
• MST CFX-W
• MST CMX

This Yokomo Rwd Drift Spring Set has been developed for the fine tuning of your chassis to fit a surface type and track layout suited for drifting. With six different options, two for the front and four for the rear, it is easy to adjust your drift car to suit carpet, asphalt, concrete and other road surfaces. Due to the special characteristics of the material used to make them, the springs have not been coated or any treatment added to keep the springs at their original performance. Over time this may cause some discoloration on the spring edges and surface. To prevent discoloration please lightly oil them with some bearing or machine oil.

Compatibility:

• Yokomo YD-2

This is a replacement Yokomo Front/Rear Body Mount Set. 

Compatibility: 

• Yokomo YD-4
• Yokomo YD-4MR

MST RMX 2.0 S RTR Fittings. Package includes replacement linkage, rod ends, spacers, servo mounts and more. 

Compatibility:

• MST RMX 2.0 S

Compatibility:

• MST MS-01D