Kyosho

This is a replacement Kyosho "Type B" Rear Hub Set. These hubs come standard with the Ultima RB6, RB5 SP, RT5, SC, SCR, DB, and Lazer FS vehicles. These hubs can be used optional with the RB5 SP2 and Lazer FS2 vehicles to provide optional camber holes. Package also includes four plastic spacers. 

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6
• Kyosho Ultima RT5
• Kyosho Ultima RT6
• Kyosho Ultima SC
• Kyosho Ultima SC6

This is a set of two 56mm front wheels for the Kyosho Lazer ZX-5 SP and FS 4WD off-road buggies. These wheels replace KYOW5029W and are required to run on the front of the Lazer SP and FS to maintain the correct off set on the front of the car.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6

This is a set of two 56mm front wheels for the Kyosho Lazer ZX-5 SP and FS 4WD off-road buggies. These wheels replace KYOW5029W and are required to run on the front of the Lazer SP and FS to maintain the correct off set on the front of the car.

Compatibility: 

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6

This is a pair of white rear wheels for the Kyosho Lazer ZX-5 4WD buggy (all models), and Ultima RB5 SP 2WD buggy. This wheel replaces KYOW5028W, and also fits the original Lazer ZX-5 and Ultima RB5 1/10 buggies.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6

This is a pair of Yellow rear wheels for the Kyosho Lazer ZX-5 4WD buggy (all models), and Ultima RB5 SP 2WD buggy. This wheel replaces KYOW5028, and also fits the original Lazer ZX-5 and Ultima RB5 1/10 buggies.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6

This is a replacement Kyosho 2.6x14mm Internal Differential Shaft Set, and is intended for use with the Inferno family of vehicles. These are the shafts that are used to hold the main large internal gear and attach it to the differential outdrive hubs.

NOTE: Replaces KYOIF39.

Compatibility:

• Kyosho Inferno GT/GT2
• Kyosho Inferno MP7.5
• Kyosho Inferno MP777
• Kyosho Inferno ST-R
• Kyosho Inferno ST-RR
• Kyosho Inferno ST-RR EVO
• Kyosho Inferno ST-RR EVO.2

This is a pack of two replacement Kyosho Front Outer Suspension Shafts, and are intended for use with the Kyosho line of 1/10 scale electric vehicles. These are the small hinge pin suspension shafts that are used to attach the front steering uprights to the front of the buggy.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6
• Kyosho Ultima RT5
• Kyosho Ultima RT6
• Kyosho Ultima SC
• Kyosho Ultima SC6

This is the Kyosho 3 Hole Rear Suspension Arm Set. These arms come standard on the RB6 2015, but can also be used optionally with the RB6 and Lazer ZX-6 buggies. 

These are the updated arms, with an inner third hole on the 2-hole side, and a new inner hole on the 1-hole side for a total of five shock mounting options! Package includes two arms and rear hub spacers.

Compatibility:

• Kyosho Lazer ZX-6
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6

This is a replacement Kyosho 44mm Inner Suspension Shaft Set, and is intended for use with the Kyosho Ultima RB6 and Lazer ZX-5 1/10 scale buggies. These shafts are used in the rear inner position on the RB6 and the front and rear inner position on the ZX-5. These pins attach the arms to the differential bulkheads.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6
• Kyosho Ultima RT5
• Kyosho Ultima RT6
• Kyosho Ultima SC
• Kyosho Ultima SC6

This Kyosho 48 Pitch Spur Gear is compatible with the Lazer and Ultima family of off road vehicles and is available in a variety of tooth count options to fine tune the torque and top speed of your model.

 Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6
• Kyosho Ultima RT5
• Kyosho Ultima SC
• Kyosho Ultima SC6

This is a replacement Kyosho 4x10x0.15mm Shim Set, and is intended for use with the Inferno GT, GT2 and Mad Force VE.

Compatibility:

• Kyosho Fazer
• Kyosho Inferno GT/GT2
• Kyosho Mad Force VE

This is a set of four replacement Kyosho 4x4.5mm Aluminum Flanged Lock Nuts. These Flanged Lock Nuts are an excellent choice for any application that requires a 4x4.5mm Aluminum Flanged Lock Nut.

Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RT5
• Kyosho Ultima SC
• Kyosho Ultima SC6

This is a pack of ten Kyosho 4x4.5mm Steel Flanged Nuts. 

Compatibility:

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6.6
• Kyosho Ultima RT5
• Kyosho Ultima SC
• Kyosho Ultima SC6

This is a pack of two replacement Kyosho 59mm Swing Shafts. 

Compatibility:

• Kyosho Rage VE

This is a replacement Kyosho 5x7mm Aluminum Servo Saver Collar Set, and is intended for use with the Kyosho Lazer ZX5 FS. 

Includes: 

• (2) 5x7x1mm Washers
• (2) 5x7x2mm Washers 

 Compatibility:

• Kyosho Lazer ZX-5

This is a pack of four replacement 5x8x2.5mm metal shielded ball bearings for Kyosho trucks and buggies. These are used for the servo saver steering posts on the Kyosho Lazer ZX-5 buggy.

Compatibility:

• Kyosho DBX
• Kyosho DBX 2.0
• Kyosho DBX VE
• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Ultima DB
• Kyosho Ultima RB5
• Kyosho Ultima RB6
• Kyosho Ultima RB6.6
• Kyosho Ultima RB7
• Kyosho Ultima RB7SS
• Kyosho Ultima RT5
• Kyosho Ultima RT6
• Kyosho Ultima SC
• Kyosho Ultima SC6
• Kyosho V-One RRR

This is a set of gray big bore shock springs for the Kyosho MP9 family of 1/8 buggies, as well as the MP777 buggies. 

Short Length 70mm Shock Spring Specifications:  

• Softer
• IF350-814: Green - 8 turns/1.4 wire (3.68lb-in / 659.38 n/m)
• IF350-7514: Orange - 7.5 turns/1.4 wire (4.02lb-in / 719 n/m)
• IF350-714: Light Blue - 7 turns/1.4 wire (4.42lb-in / 6.09 n/m)
• IF350-1016: White - 10 turns/1.6 wire (4.62lb-in / 820 n/m)
• IF350-6514: Gray - 6.5 Turns/1.4 wire (4.91lb-in / 879.17 n/m)
• IF350-916: Purple - 9 turns/1.6 wire (5.28lb-in / 937.39 n/m)
• IF350-816: Light Green - 8 turns/1.6 wire (6.16lb-in / 1093.62 n/m)
• IF350-716: Blue - 7 turns/1.6 wire (7.40lb-in / 1312.35 n/m)
• Harder

Compatibility:

• Kyosho Inferno MP10
• Kyosho Inferno MP777
• Kyosho Inferno MP9
• Kyosho Inferno MP9 TKI2
• Kyosho Inferno MP9 TKI3
• Kyosho Inferno MP9 TKI4
• Kyosho Inferno MP9e
• Kyosho Inferno MP9e Evo
• Kyosho Inferno MP9e TKI4

This is a replacement Kyosho 73mm Universal Swing Shaft for use with the Kyosho 73mm Front Universal Swing Shaft Set (KYOLA257). 

Compatibility: 

• Kyosho Lazer ZX-5
• Kyosho Lazer ZX-6
• Kyosho Lazer ZX-6.6

This is a replacement Kyosho Front-Center Universal Swing Shaft, and is intended for use with the Kyosho line of MP9 1/8 scale buggies. This swing shaft features a thicker shaft than the stock and is made from hardended chrome molly steel for the ultimate in durability.

Compatibility:

• Kyosho Inferno MP9
• Kyosho Inferno MP9 TKI2
• Kyosho Inferno MP9 TKI3
• Kyosho Inferno MP9 TKI4
• Kyosho Inferno MP9e
• Kyosho Inferno MP9e TKI4

This is a pack of replacement 8x10mm shims for Kyosho buggies, and fits the Inferno MP7.5 and MP777 family of buggies. These shims are awesome for shimming wheel axles on Kyosho buggies to stop side to side play where the axles go through the wheel bearings.

Compatibility:

• Kyosho Inferno MP7.5
• Kyosho Inferno MP777
• Kyosho Inferno ST-R

This is a pack of five Kyosho 8x12x0.2mm shims, used to adjust the end play on the hubs and driveshafts on the Kyosho MP9 and Inferno GT. You want to shim these parts so there is a slight amount of play, but be careful not to get them too tight, as it will cause pre mature bearing wear.

Compatibility:

• Kyosho Inferno GT/GT2
• Kyosho Inferno MP10
• Kyosho Inferno MP9
• Kyosho Inferno MP9 TKI2
• Kyosho Inferno MP9 TKI3
• Kyosho Inferno MP9 TKI4
• Kyosho Inferno MP9e Evo
• Kyosho Inferno MP9e TKI4
• Kyosho Inferno ST-RR EVO
• Kyosho Inferno ST-RR EVO.2

This is a replacement Kyosho 91mm HD Universal Swing Shaft Set, and is intended for use with the Kyosho Inferno TKI3 1/8 scale buggy, as well as previous MP9 models. These driveshafts now have 3.5mm thick shafts, making them thicker and more durable than the original lightweight driveshafts that were included in the TKI2 kits. These can be used in both the front and rear positions, but are not recommended when using the wide rear track setup with 2mm offset hubs.

Compatibility:

• Kyosho Inferno MP9 TKI2
• Kyosho Inferno MP9 TKI3
• Kyosho Inferno MP9 TKI4
• Kyosho Inferno MP9e TKI
• Kyosho Inferno MP9e TKI4