Racing Parts



Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (14T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (14T) **

$ 12.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (15T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (15T) **

$ 12.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Traxxas 4mm  Aluminum Serrated Nylon Locknut (4) **

Traxxas 4mm Aluminum Serrated Nylon Locknut (4) **

$ 2.00

Lightweight and great looking, these blue-anodized-aluminum flange lock nuts are the perfect finishing touch for your serious road racer. Compatibility: (PINK)  TRAXXAS 1/16 E-REVO  TRAXXAS 1/16 SLASH  TRAXXAS 1/16 SUMMIT  TRAXXAS BANDIT Compatibility: (BLUE) Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4 Compatibility: (ALUMINUM) Traxxas Bandit Traxxas Jato Traxxas...

Options
Traxxas Heavy Duty Rear Driveshaft Assembly **

Traxxas Heavy Duty Rear Driveshaft Assembly **

$ 12.00

This is a replacement Traxxas Heavy Duty Rear Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This package includes the parts needed to replace one rear driveshaft. Compatibility: Traxxas Nitro Slash Traxxas Rally Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4

Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

$ 7.00

This is one Traxxas super duty long glow plug for engines that accept long shaft plugs (basically any engine except OS engines). This is a medium hot glow plug intended for use in Traxxas TRX2.5 & TRX3.3 race engines that come with the Traxxas T-Maxx and Traxxas Revo monster trucks. This is the standard plug recommended by Traxxas.  Compatibility: Traxxas Nitro Slash

Traxxas Universal Body Washers **

Traxxas Universal Body Washers **

$ 2.00

This is a pack of eight Traxxas Universal Body Washers.  Compatibility:  Traxxas 4-Tec Traxxas Bandit Traxxas E-Maxx Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Revo Traxxas Rustler Traxxas S-Maxx Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Slayer Traxxas Stampede Traxxas Stampede 4x4 Traxxas T-Maxx Traxxas Telluride 4x4

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (16T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (16T) **

$ 11.99 Save $ 2.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek) **

ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek) **

$ 7.79 Save $ 0.21

This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features:  19mm hole spacing (measured from output shaft screw hole, to...

Options
RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) **

RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) **

$ 11.99

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!  Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off...

Team Associated B64 Spur Gear (81T) **

Team Associated B64 Spur Gear (81T) **

$ 5.99

This is a Team Associated 81T Spur Gear, suited for use with the B64 4-Wheel Drive buggy.  Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D

Racers Edge 1/8 Body Clips (10) **

Racers Edge 1/8 Body Clips (10) **

$ 1.99

This is a pack of ten optional 1/8 scale body clips from Racers Edge.

RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash) **

RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash) **

$ 8.99

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend...

Team Losi Racing Aluminum Servo Horn (25T-Futaba/Orion/Savox/ACE) (TLR 22) **

Team Losi Racing Aluminum Servo Horn (25T-Futaba/Orion/Savox/ACE) (TLR 22) **

$ 10.99 Save $ 2.00

This is a Team Losi Racing Aluminum Servo Horn, intended for use with the Team Losi Racing 22 1/10 buggy. Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22SCT Losi 22SCT 3.0 Losi 22T Losi 22T 2.0 Losi TEN-SCTE 3.0  

Traxxas 48P Spur Gear (90T) **

Traxxas 48P Spur Gear (90T) **

$ 3.00

This is an optional 48P 90T spur gear from Traxxas. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede

Losi Rear Bumper Set **

Losi Rear Bumper Set **

$ 11.99 Save $ 2.00

This is a replacement Losi Rear Bumper Set, and is intended for use with the Losi TEN-SCTE. Compatibility: Losi TEN Rally X Losi TEN-SCT Nitro Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-SCTE 3.0

Team Associated B64 Rear Suspension Arm (2) **

Team Associated B64 Rear Suspension Arm (2) **

$ 7.99

This is a replacement set Team Associated Rear Arms, suited for use with the B64 4-Wheel Drive buggy.   Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D

Team Associated B64 Front Arms **

Team Associated B64 Front Arms **

$ 7.99

Team Associated B64 Front Arms. These are the standard replacement front arms for the B64D buggy. Package includes two front arms and spacers. Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D

Tekno RC Battery Strap (Black) (3) **

Tekno RC Battery Strap (Black) (3) **

$ 14.00

This is a pack of two replacement Tekno RC Black Battery Straps. These battery straps are included in the Tekno RC Brushless Conversion for the Traxxas Revo, but they are also very useful for do-it-yourself conversions using the Tekno RC Battery Tray for Revo. They can also be used for any application calling for these lengths of strap. These straps are ‘cinch’ straps and wrap around on themselves for superior holding power and durability without relying on grommets or screws...

Pro-Line Pro Pull 1/10 Scale Body Clips **

Pro-Line Pro Pull 1/10 Scale Body Clips **

$ 13.00 Save $ 0.95

This is a set of 1/10th scale Pro Pull body clips from Pro-Line Racing! This set contains twelve pro pull tabs and 20 body clips. Do you ever get frustrated trying to remove your body clips? Do they slip out of your grasp after a heart pounding main and a grueling shift in turn marshaling? Well struggle no longer racing fans! Pro-Line introduces the all-new Pro Pulls for 1:8 and 1:10 RC vehicles.Pro Pulls are a groundbreaking way to enhance...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (17T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (17T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

RPM Front Bearing Carrier Set **

RPM Front Bearing Carrier Set **

$ 8.99 Save $ 0.01

This is an optional RPM Front Bearing Carrier Set, and is intended for use with the Traxxas Electric Rustler, Electric Stampede, Bandit and Slash 1/10 vehicles. When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version....

Team Associated B64 Carbon Fiber Front Shock Tower **

Team Associated B64 Carbon Fiber Front Shock Tower **

$ 16.99 Save $ 3.00

Team Associated B64 Carbon Fiber Front Shock Tower. This is the replacement carbon tower included with the B64D kit.  Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D

Traxxas 4mm Steel Flanged Serrated Nylon Locknut (8) **

Traxxas 4mm Steel Flanged Serrated Nylon Locknut (8) **

$ 3.29 Save $ 0.06

This is a pack of eight 4mm nylon locking nuts from Traxxas. Compatibility: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit Traxxas Bandit Traxxas Nitro Slash Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (13T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (13T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz) **

Team Associated Factory Team 1/4 oz. Chassis Weights (2oz) **

$ 5.99

This is a pack of self stick chassis weights from Team Associated. These self stick weights can be used to balance your chassis. Package includes a total of 2oz of weight. Compatibility: Team Associated Nitro TC3 Team Associated Pro SC10 Team Associated RC10 B4 Team Associated RC10 B4.1 Team Associated RC10 B44 Team Associated RC10 B44.1 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 GT Team Associated RC10 R5 Team Associated...

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

$ 7.99

This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug. Some things to keep in mind: The smaller the engine, the hotter the plug. The higher the...

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

$ 8.99

This is a pack of two ProTek R/C "High Temp" 1/8 Scale Silicone Exhaust Manifold Gaskets. These are the gaskets supplied with the Samurai 321B engine and tuned pipes. These high temp gaskets are perfect for nitro competition or heavy use.   The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time...

Losi Aluminum Clamping Wheel Hex Set (2) **

Losi Aluminum Clamping Wheel Hex Set (2) **

$ 17.99 Save $ 2.00

This is a pack of two optional Losi Aluminum Clamping Wheel Hexes, and are intended for use with the Losi TEN-SCTE.  Compatibility: Losi TEN-SCTE Losi TEN-SCTE 3.0

Traxxas Heavy Duty Front Driveshaft Assembly **

Traxxas Heavy Duty Front Driveshaft Assembly **

$ 10.00

This is a replacement Traxxas Heavy Duty Front Driveshaft Assembly, and is intended for use with the Traxxas Stampede 4x4. This front driveshaft can be used on the left or right side of the chassis, is fully assembled and ready to install. Compatibility: Traxxas Rally Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2) **

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2) **

$ 9.99

  RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong...

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T) **

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T) **

$ 12.99

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

$ 15.25 Save $ 0.74

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (18T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (18T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Team Associated Factory Team Aluminum Wing Buttons (Black) **

Team Associated Factory Team Aluminum Wing Buttons (Black) **

$ 6.99

Team Associated Factory Team Aluminum Wing Buttons. These optional buttons are good for both 1/8 and 1/10 vehicles and help to provide a solid mount between the wing and wing mount. Compatibility: Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B64 Team Associated RC10 B64D Team Associated RC8T3.1 Team Associated TC7.1 Team Associated TC7.2

Team Losi Racing 4mm Aluminum Serrated Locknut Set (6) (Black) **

Team Losi Racing 4mm Aluminum Serrated Locknut Set (6) (Black) **

$ 11.99 Save $ 2.00

This is an optional Losi 4mm Aluminum Serrated Lock Nut Set. These lightweight aluminum locking nuts feature a serrated surface for additional holding power to ensure wheels don't come loose during long runs. Features:  Made from lightweight aluminum Serrated surface for additional holding power  Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22 4.0 Losi 22 4.0 SPEC-Racer Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 SR Losi 22-4 2.0 Losi 22SCT...

Losi Front Bumper Set **

Losi Front Bumper Set **

$ 11.99 Save $ 2.00

This is a replacement Losi Front Bumper Set, and is intended for use with the Losi TEN-SCTE. Compatibility:  Losi TEN-SCT Nitro Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-SCTE 3.0

Team Losi Racing HD Differential Housing w/Integrated Insert **

Team Losi Racing HD Differential Housing w/Integrated Insert **

$ 9.99 Save $ 2.00

This is an optional Team Losi Racing HD (Heavy Duty) Differential Housing, with an Integrated Insert, and is intended for use with the Team Losi Racing TEN-SCTE 1/10 scale 4WD short course truck. This package includes one complete differential housing, one gasket, two shims, two o-rings and hardware. This differential housing can be used in the front or rear differential. Compatibility: Losi TEN Rally X Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-SCTE 3.0

Team Associated Front Upper Arm Set w/Caster Inserts **

Team Associated Front Upper Arm Set w/Caster Inserts **

$ 5.99

This is a replacement Team Associated Front Upper Arm Set, intended for use with the Team Associated RC8B3 Nitro Buggy. This set includes one left and one right side arm, plus upper hinge pin inserts that allow the caster to be adjusted by moving the upper arm back and forth. Note: These arms are directional, with a right and left side.  Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e

Team Associated B64 Wing Mount Set **

Team Associated B64 Wing Mount Set **

$ 5.99

This is a replacement Team Associated Wing Mount Set, suited for use with the B64 4-Wheel Drive buggy.  Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D

Mugen Seiki Front Lower Suspension Arm Set **

Mugen Seiki Front Lower Suspension Arm Set **

$ 15.25 Save $ 0.74

This is a replacement Mugen Front Lower Suspension Arm Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This set includes a left and right side lower arm.  Compatibility: Mugen MBX7 Mugen MBX7E ECO Mugen MBX7R Mugen MBX7R ECO Mugen MGT7 Mugen MGT7E

Tekno RC Composite Spur Gear (44T) **

Tekno RC Composite Spur Gear (44T) **

$ 7.40 Save $ 0.59

This is an optional Tekno RC 44 Tooth Composite Spur Gear. This black composite spur gear is for your EB48 or SCT410. This spur gear will completely black out your kit making your vehicle look more sleek than ever.   Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC MT410 Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace **

Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace **

$ 22.99 Save $ 2.00

This is a replacement Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace. The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently adjust kickup, sweep, toe, and anti-squat as well as front and rear roll centers. The V2 system requires TKR5165 square inserts. Each block is available separately to keep replacement costs down. Each block is CNC machined from 7075 aluminum then...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T) **

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T) **

$ 12.99

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

Tekno RC EB410/ET410 Front & Rear Bulkhead Set (Revised) **

Tekno RC EB410/ET410 Front & Rear Bulkhead Set (Revised) **

$ 23.00 Save $ 1.99

This is the "Revised" Tekno EB410 Bulkhead Set. The front bulkhead in this set has been strengthened to reduce fatigue from extreme impacts. This TKR6519B Bulkhead Set is a direct replacement for the original TKR6519 and does not require additional parts or hardware. Includes:  One front bulkhead with cover and one rear bulkhead with cover. Compatibility: Tekno RC EB410 Tekno RC ET410

Team Associated Front Arm Set **

Team Associated Front Arm Set **

$ 9.99

This is a replacement Team Associated Front Arm Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right side arm, as well as two plastic arm spacers. These arms are directional!  Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e

Team Losi Racing TEN-SCTE 3.0 Front Arm Set **

Team Losi Racing TEN-SCTE 3.0 Front Arm Set **

$ 13.99 Save $ 2.00

This is a replacement Team Losi Racing Front Arm Set for the TEN-SCTE 3.0. Compatibility: Losi TEN-SCTE 3.0

RPM Traxxas Slash Rear A-Arms (Black) (2) **

RPM Traxxas Slash Rear A-Arms (Black) (2) **

$ 11.99

This is a set of two rear RPM  rear A-arms for the Traxxas Slash and are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions. RPM's first design challenge was to beef up thier version of the Slash rear A-arms to handle serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! They then eliminated all of the unnecessary holes and shock mounts that would be needed...

Traxxas 48P Spur Gear (86T) **

Traxxas 48P Spur Gear (86T) **

$ 3.00

This is an optional 48P 86T spur gear from Traxxas. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede