Products



#57-140GS Radial Bearings Team Losi RC Car Ten SCTE 4WD

#57-140GS Radial Bearings Team Losi RC Car Ten SCTE 4WD

$ 30.00 Save $ 5.99

RC Car & Truck Green Seal Bearing kits have been an industry standard for many years and are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The heavy duty rubber seal provides extra protection against the harshest elements. All Green Seal bearings are packed in grease and will require a short break in period to loosen up. Product Qty Info MR6700-2GS  ID 10mm x OD 15mm x Width...

#57-290GS Radial Bearings Team Losi RC Car 8ight 3.0

#57-290GS Radial Bearings Team Losi RC Car 8ight 3.0

$ 45.00 Save $ 6.99

RC Car & Truck Green Seal Bearing kits have been an industry standard for many years and are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The heavy duty rubber seal provides extra protection against the harshest elements. All Green Seal bearings are packed in grease and will require a short break in period to loosen up. Product Qty Info R1212-2GS  ID 0.5000in x OD 0.7500in x Width...

#57-305GS Radial Bearings Team Losi RC Car 8ight-E 3.0

#57-305GS Radial Bearings Team Losi RC Car 8ight-E 3.0

$ 41.00 Save $ 5.00

RC Car & Truck Green Seal Bearing kits have been an industry standard for many years and are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for life. The heavy duty rubber seal provides extra protection against the harshest elements. All Green Seal bearings are packed in grease and will require a short break in period to loosen up. Product Qty Info R1212-2GS  ID 0.5000in x OD 0.7500in x Width...

021	Nickel Plated Steel Motor Pinion	1/8" / 48 pitch	 21T

021 Nickel Plated Steel Motor Pinion 1/8" / 48 pitch 21T

$ 4.19 Save $ 0.80

HARD NICKEL PLATED STEEL PINIONSThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (NOT INCLUDED) fits...

032	Nickel Plated Steel Motor Pinion	1/8" / 48 pitch	32T

032 Nickel Plated Steel Motor Pinion 1/8" / 48 pitch 32T

$ 4.19 Save $ 0.80

HARD NICKEL PLATED STEEL PINIONSThe 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. In sizes 12 through 40 teeth. Pinions stamped with tooth number. The bright nickel finish protects the steel from corrosion and increases lubricity of the gear by reducing friction and adhesion between the pinion and spur gear. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (NOT INCLUDED) fits...

Sold Out
1/10 Body Clips (20)

1/10 Body Clips (20)

$ 5.25 Save $ 0.25

Description Secure you body with these body clips from Pro-Line! Features: 1:10 Truck/Buggy Body Clips What's included: Pack of 20

Sold Out
1/10 Pro Pulls (12 Pro Pulls and 20 Body Clips)

1/10 Pro Pulls (12 Pro Pulls and 20 Body Clips)

$ 9.56 Save $ 1.39

Do you ever get frustrated trying to remove your body clips? Do they slip out of your grasp after a heart pounding main and a grueling shift in turn marshaling? Well struggle no longer racing fans! Pro-Line introduces the all-new Pro Pulls for 1:8 and 1:10 RC vehicles. Pro Pulls are a groundbreaking way to enhance your pit performance and keep you on pace with the competition. No longer will you struggle to remove your body clips for last minute...

Sold Out
1/8 MAMBA Monster 2 25V WP ESC, w/2200Kv 010010801

1/8 MAMBA Monster 2 25V WP ESC, w/2200Kv 010010801

$ 237.15 Save $ 41.85

Castle Creations' introduction of the Mamba Monster was a break-through moment for R/C modelers wanting to experience what seemed to be unobtainable. Brute power and sheer stamina have made this our legacy “power up” for popular 1/8th scale buggies, truggies and on road vehicles and 1/10th scale monster trucks. The current version we call Mamba Monster 2. The ESC is capable of 2S LiPo to a maximum of 6S LiPo, and is now waterproof (see product use statement below). This...

Sold Out
1/8 Pro Pulls (12 Pro Pulls and 20 Body Clips)

1/8 Pro Pulls (12 Pro Pulls and 20 Body Clips)

$ 10.36 Save $ 1.59

Do you ever get frustrated trying to remove your body clips? Do they slip out of your grasp after a heart pounding main and a grueling shift in turn marshaling? Well struggle no longer racing fans! Pro-Line introduces the all-new Pro Pulls for 1:8 and 1:10 RC vehicles. Pro Pulls are a groundbreaking way to enhance your pit performance and keep you on pace with the competition. No longer will you struggle to remove your body clips for last minute...

1/8" Heat Shrink Tubing Set, 8pc

$ 1.60 Save $ 0.20

8pc

10TH SCALE OFF-ROAD TIRE STICK

10TH SCALE OFF-ROAD TIRE STICK

$ 12.75 Save $ 2.25

Tire organization is key and especially in 1/10th off-road when wear and tire prep methods must be closely monitored at all times.  JConcepts introduces the new tire sticks which allow a driver to neatly group sets of front and rear tires together.  With availability in blue or black colors, the tire sticks can make an eye popping appearance in the pits or tucked away nicely in storage or racing bags. The tire sticks operate with 2 separate pieces that are designed...

Options
16MM RR SHK SPRING, 3.8 RATE, GREEN(2): 8B 3.0

16MM RR SHK SPRING, 3.8 RATE, GREEN(2): 8B 3.0

$ 10.99

This is an optional Team Losi Racing 16mm Rear Shock Spring Set, and is intended for use with the Losi 8IGHT 3.0 1/8 buggy. These green - 3.8 rate springs are stiffer than the stock silver - 3.6 rate springs included in the kit. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness

Sold Out
1:10 BUGGY CHAIN LINK 2.2 REAR (CLAY) W/ RED INSERT

1:10 BUGGY CHAIN LINK 2.2 REAR (CLAY) W/ RED INSERT

$ 3.00 Save $ 21.99

**BRAND NEW TIRES CLEARANCE**   After the great success of the EVO Chain Link, we have made it even easier to race one of the fastest tread patterns on 2.2 wheels. The Chain Link features a bi-level, interlocking tread pattern that creates support for the tire's carcass and treads. This addition support leads to consistency through corners and provides on-throttle stability. The Chain link has a perfect balance of forward drive and side bite which is ideal for hard packed...

Sold Out
1:10 BUGGY CHAIN LINK 2.2 REAR (SUPER SOFT) W/ RED INSERT

1:10 BUGGY CHAIN LINK 2.2 REAR (SUPER SOFT) W/ RED INSERT

$ 18.25 Save $ 6.74

After the great success of the EVO Chain Link, we have made it even easier to race one of the fastest tread patterns on 2.2 wheels. The Chain Link features a bi-level, interlocking tread pattern that creates support for the tire's carcass and treads. This addition support leads to consistency through corners and provides on-throttle stability. The Chain link has a perfect balance of forward drive and side bite which is ideal for hard packed or blue groove, indoor and...

1:10 BUGGY EVO REAR WHITE (KYO-AE-TLR)

1:10 BUGGY EVO REAR WHITE (KYO-AE-TLR)

$ 7.49

The 1:10 EVO wheels have taken buggy racing to the next level by adapting the L-shaped 1:8 buggy bead to the smaller 1:10 wheels. The L-shape bead makes tire mounting much easier by giving you a wider and easily accessible gluing surface to ensure a strong bond between the tire and wheel. The new EVO wheel has been redesigned to be stronger, stiffer, and also features pre-punched vent holes in the wheel.  Included: One Pair of Wheels - Fits rear...