Name: Tekin ROC412 Element Proof 4-Pole Sensored Brushless Rock Crawler Motor (1800kV)
Brand: Tekno
SKU: TEKTT2624
Price: 139.99 USD
Availability: InStock

Tekno

Tekin ROC412 Element Proof 4-Pole Sensored Brushless Rock Crawler Motor (1800kV)
TEKTT2624

$ 185.99 $ 139.99 Save $ 46.00

Overview

Key Features

Element Proof design tackles Water, Mud and Snow*
18.5mm Rotor provides more Torque and Braking Power
4 Pole 12 Slot Hi-torque Motor Design
CNC Machined 6061-T6 Billet Aluminum Heatsink Can
Crawler, Rock Race and Trail Rig Specific
Neodymium Sintered Magnets
Rebuildable Design
High Purity Copper Windings Maximizes Efficiency
Precision Engineered for Maximum Energy Conversion
Dual-Plug Sensor Wire Harness for use with all sensored and sensorless systems
High RPM ABEC5 Oversized Bearings

Overview

Tekin's third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new Gen3 handles the task in stride, delivering the smooth power across all RPMs that you've come to expect from a Tekin motor. Much more than a re-hash and new look, the Gen3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.

Specifications

Input Voltage: 2S - 5700kV / 4600kV / 3100kV
Input Voltage: 3S - 3100kV / 2300kV / 1800kV
Input Voltage: 4S - 2300kV / 1800kV / 1200kV
Input Voltage: 5S - 1800kV / 1200kV / 500kV
Input Voltage: 6S - 1200kV / 500kV
Weight: 6.3 oz (180g)
Shaft Dimensions: 1/8in (3.2mm x 15.3mm)
Motor Diameter: 1.41in (35.8mm)
Motor Length: 2.1in (52.5mm)
Bearing Dimensions: Front: 5 x 14 x 5mm / Rear: 5 x 11 x 5mm
Rotor Size: 18.5mm
Rebuildable: Yes

Recommended Applications:

ROCK CRAWLING & SCALE TRAIL

1/10 4WD 2.2 Shafty

1/10 4WD 2.2 MOA Comp

1/10 4WD 2.2 Rock Race

1/10 4WD 1.9 Rock Race

1/10 4WD Trail

* Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.

** The ROC412 EP is not intended for operation while submerged in liquid.

*** Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.

Specifications

Motor Design: Inrunner
Motor Type: Brushless

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (11T)
TKR4171

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (12T)
TKR4172

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (13T)
TKR4173

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (15T)
TKR4175

$ 12.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (16T)
TKR4176

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (17T)
TKR4177

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (18T)
TKR4178

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (19T)
TKR4179

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (20T)
TKR4180

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (21T)
TKR4181

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (22T)
TKR4182

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (23T)
TKR4183

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (24T)
TKR4184

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (25T)
TKR4185

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (26T)
TKR4186

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (27T)
TKR4187

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (28T)
TKR4188

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (29T)
TKR4189

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (30T)
TKR4190

$ 13.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

Massive M5 set screw grips better and won't strip out
Precisely machined and lightened for quiet and efficient operation
Laser etched for easy identification
Hardened steel construction
MOD1 pitch, 5mm bore, standard length shank

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC 1/8 High Down Force Buggy Wing (ROAR/IFMAR Legal) (Black)
TKR5292K

$ 14.99

This Tekno RC 1/8 High Down Force Buggy Wing is Black color and is ROAR/IFMAR legal. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking.

This item replaces: TKR5037B – Wing (black)

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NT48
Tekno RC NT48.3

Tekno

Tekno RC 1/8 High Down Force Buggy Wing (ROAR/IFMAR Legal) (White)
TKR5292W

$ 14.99

This Tekno RC 1/8 High Down Force Buggy Wing is white color and is ROAR/IFMAR approved. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking.

This item replaces: TKR5037 – Wing (white)

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48.4
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NB48.4
Tekno RC NT48
Tekno RC NT48.3

Tekno

Tekno RC 12mm Aluminum Clamping Wheel Hex Set (4)
TKR5571A

$ 19.99 $ 18.99 Save $ 1.00

This is an optional Tekno RC 12mm Aluminum Wheel Hex Set. These upgraded aluminum 12mm hex adapters fit all 12mm hex SC wheels are lightweight and durable, and will eliminate lost drive pins.

Features:

Hard anodized CNC machined aluminum construction
Set screw to avoid losing drive pins
Ultimate durability
Lightweight design
Compatible with Tekno Slash 2WD M6 Driveshafts
Compatible with Team Associated SC10 4×4
Compatible with Tekno RC SCT410

Compatibility:

Team Associated SC10 4x4
Tekno RC EB410
Tekno RC ET410
Tekno RC SCT410
Tekno RC SCT410.3
Traxxas Slash

Tekno

Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set (4)
TKR1654X

$ 19.99 $ 17.99 Save $ 2.00

This is an optional Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set. These aluminum 12mm hex adapters are intended for use with the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable.

Features:

Hard anodized CNC machined aluminum construction
Set screw to avoid losing drive pins
Ultimate durability
Lightweight design
Compatible with our M6 Driveshafts for the Slash 2WD

Compatibility:

Team Associated SC10 4x4
Tekno RC EB410
Tekno RC ET410
Tekno RC SCT410.3
Traxxas Slash
Traxxas Slash 4x4
Traxxas Stampede 4x4

Tekno RC 12mm Composite Wheel Hexes (4) **

Tekno

Tekno RC 12mm Composite Wheel Hexes (4) **
TKR5571

$ 4.99

This is a pack of four replacement Tekno RC 12mm Composite Wheel Hexes, and are intended for use with the Tekno RC SCT410 1/10 scale 4WD short course truck.

Compatibility:

Tekno RC EB410
Tekno RC ET410
Tekno RC SCT410

Tekno RC 12mm Nylon M6 Driveshaft Hex Adapter Set (4) (Front/Rear) **

Tekno

Tekno RC 12mm Nylon M6 Driveshaft Hex Adapter Set (4) (Front/Rear) **
TKR1654

$ 5.99

This is a Tekno RC 12mm Nylon M6 Driveshaft Hex Adapter Set. These 12mm hex adapters are intended for use with Tekno RC M6 6mm Driveshafts. They fit all 12mm hex SC wheels and have a 6mm inner bore to fit the M6 Stub Axles. These may be used on other 6mm axle applications.

Compatibility:

Tekno RC EB410
Tekno RC ET410
Traxxas Slash 4x4
Traxxas Stampede 4x4

Tekno

Tekno RC 12x21x5mm Ball Bearing (4)
TKRBB12215

$ 11.99

This is a replacement set of four Tekno RC 12x21x5 Ball Bearing, intended for use with the Tekno RC NB48 2.0 1/8 Competition Off-Road Nitro Buggy Kit.

Compatibility:

Tekno RC EB48 2.0
Tekno RC NB48 2.0

Tekno RC 13x16x.1mm Differential Shim (10)

Tekno

Tekno RC 13x16x.1mm Differential Shim (10)
TKR1222

$ 3.99

This is a pack of ten replacement Tekno RC 13x16x.1mm Differential Shims, and are intended for use with the Tekno R/C EB48 electric 1/8 buggy. These are the large shims that are installed on the outside of the differential between the bearings and bulkhead, and are used to shim the backlash between the front and rear ring and pinion gears.

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48.4
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC MT410
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NB48.4
Tekno RC NT48
Tekno RC NT48.3
Tekno RC SCT410
Tekno RC SCT410.3

Tekno

Tekno RC 13x19x4mm Ball Bearing (4)
TKRBB13194

$ 11.99

This is a pack of four replacement Tekno RC 13x19x4mm Ball Bearings, and are intended for use with the Tekno R/C EB48 electric 1/8 buggy. These bearings are used in the inner position of the rear hubs and the steering spindles.

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48.4
Tekno RC ET48
Tekno RC ET48.3
Tekno RC MT410
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NB48.4
Tekno RC NT48
Tekno RC NT48.3

Tekno

Tekno RC 15x21x4 Ball Bearing (4) (.4 CVA Driveshafts)
TKRBB15214

$ 11.99

Ball Bearings 15x21x4 (4)

Compatibility:

Tekno RC EB48 2.0
Tekno RC EB48.4
Tekno RC NB48 2.0
Tekno RC NB48.4

Tekno

Tekno RC 15° Trailing Spindle Carrier Set
TKR5194

$ 14.99

This is an optional Tekno RC 15° Trailing Spindle Carrier Set. The 15 degree spindle carriers are ideal for bumpy or blown out tracks. They provide more stability in low-bite conditions and make the vehicle easier to drive. Constructed of durable composite material, they are a direct upgrade for the EB48/EB48.2/NB48 1/8 scale buggies as well as the ET48 and NT48 truggies.

They are stock on the EB48.3 and NB48.3.

Combined with the chassis kick up and V2 hingepin braces, the total caster on the vehicles can be adjusted from 23-27 deg.

Use TKR1601 set screws to secure bottom mounting screws.

Compatibility:

Tekno RC EB48
Tekno RC EB48.3
Tekno RC ET48.3
Tekno RC MT410
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NT48
Tekno RC NT48.3

Tekno

Tekno RC 17mm Aluminum "T Logo" Covered Serrated Wheel Nut (Red) (4)
TKR5116BR

$ 24.99 $ 23.00 Save $ 1.99

This is a pack of four Tekno RC 17mm Aluminum "T Logo" Covered Serrated Wheel Nuts, intended for use with 1/8th scale Tekno kits. These wheel nuts are machined from quality aluminum with a red anodized coating for an added flash of color.

Compatibility:

Tekno RC EB48
Tekno RC EB48.2
Tekno RC EB48.3
Tekno RC EB48SL
Tekno RC ET48
Tekno RC ET48.3
Tekno RC NB48
Tekno RC NB48.3
Tekno RC NT48

Tekno

Tekno RC 17mm Hub Adapters (2) (1/8th Width) (SCT410)
TKR5570-17

$ 24.99

This is a pack of two Tekno RC 17mm Hub Adapters. This Hub Adapter Set will allow you to convert your SCT410 into a full spec super lightweight 1/8th buggy! These Hubs are sold in pairs and will require 2 sets to complete the transformation.

Parts Needed to Complete the Conversion:

TKR5033
TKR5037
TKR5026
TKR5018
TKR5011
TKR5010
TKR1221
TKR1201
TKR1402
TKR1524
TKR1525
TKR1323

Compatibility:

Tekno RC EB48SL
Tekno RC SCT410

Tekno

Tekno RC 17mm M6 Driveshaft Hub Adapter Set (Slash) (2)
TKR165417

$ 24.99 $ 22.49 Save $ 2.50

This is an optional Tekno RC 17mm M6 Driveshaft Hub Adapter Set, and is intended for use with the Traxxas Slash and Slash 4x4 trucks with Tekno M6 driveshafts. Experience the best 17mm adapters on the market. Based off of a true 1/8th scale adapter system, these are the strongest, best performing units available. New stub axles are made from hardened steel, the adapters are hard anodized CNC machined aluminum.

Includes:

(2) 6mm stub axles
(2) 17mm aluminum hub
(2) serrated aluminum wheel nuts
(2) drive pin

Compatibility:

Traxxas Slash 4x4
Traxxas Stampede 4x4

Tekno

Tekno RC 17mm M6 Driveshaft Hub Adapter Set (Slash) (2)
TKR1654-17

$ 22.49

This is an optional Tekno RC 17mm M6 Driveshaft Hub Adapter Set, and is intended for use with the Traxxas Slash and Slash 4x4 trucks with Tekno M6 driveshafts. Experience the best 17mm adapters on the market. Based off of a true 1/8th scale adapter system, these are the strongest, best performing units available. New stub axles are made from hardened steel, the adapters are hard anodized CNC machined aluminum.

Includes:

(2) 6mm stub axles
(2) 17mm aluminum hub
(2) serrated aluminum wheel nuts
(2) drive pin

Compatibility:

Traxxas Slash 4x4
Traxxas Stampede 4x4

Key Features

Overview

Specifications

Recommended Applications:

Track is Temporarily closed