furitek

Features:
14 Pole 12 slot hi-torque motor design.
High purity and higher temperature single copper winding --- lower copper losses, very good heat dissipating--maximizes efficiency.
Super thin (0.2 mm) stator laminations --- lower eddy losses --- maximizes efficiency.
Japansese NMB-- High RPM ABEC5 bearings.
Precision balanced rotor, smoothness for best reliability and maximum RPM.
CNC machined 6061 T6 billet aluminum heatsink can.
Precision engineered for maximum energy conversion.

Specifications:
KV (RPM/Volt): 1400 
No-load Current(@10v): 0.5A 
Watt: 180W 
Battery: 2-4S 
Resistance: 0.24ohm 
Max Current: 15A 
Slot/Pole: 12S14P 
Motor Size: Ø 28 * 19 mm 
Stator Size: 2204 
Weight(g): 29.5g

Package includes:
- 1x Furitek KOMODO 2204 1400kv brushless motor
- 2x M3x14 Round Head Hex Screws

FURITEK high quality JST-RCY to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc.  This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.

Application: For lipo batteries that have red JST-RCY connectors to use with TEGU and LIZARD ESCs

Note:  NOT suitable for Furitek MOMENTUM esc

This Furitek Battery Adapter Cable allows you to adapt from the standard 2 pin JST-PH connector to an XT30 style connector. Overall length is 36mm. 

• Brushless and Brushed motor control (default is brushless)
• 2.5A 5V/6.5V selectable voltage BEC
• Small size
• Smart device programming for Apple iOS and Android devices
• Firmware updateable (with optional bluetooth module)
• Realtime telemetry with 10Hz update rate
• Compatible with all transmitter and receiver types

Specifications:
Dimensions: 28x15.5mm (LxW)
Weight: ~3.7g
Battery Type: 2s 7.4V LiPo | 3s 11.1V LiPo
Motor Type: Brushed DC | Sensorless Brushless DC 
BEC Output: 5/6.5V, 2.5A
ESC Current: 30A Constant | 50A Burst
Waterproof: NO

Includes:

• (1) Furitek 30A ESC
• (1) Power Cable
• (1) External ESC Cable
• (1) Heat shrink tube

Compatibility: 

• Axial SCX24

• Brushless and Brushed motor control (default is brushless)
• 2.5A 5V/6.5V selectable voltage BEC
• Small size
• Smart device programming for Apple iOS and Android devices
• Firmware updateable
• Realtime telemetry with 10Hz update rate
• Compatible with all transmitter and receiver types

Specifications:
Dimensions: 28x15.5mm (LxW)
Weight: ~3.7g
Battery Type: 2s 7.4V LiPo | 3s 11.1V LiPo
Motor Type: Brushed DC | Sensorless Brushless DC
BEC Output: 5/6.5V, 2.5A
ESC Current: 30A Constant | 50A Burst
Waterproof: NO

Includes:
(1) Furitek 30A ESC
(1) Bluetooth Module
(1) Power Cable
(1) External ESC Cable
(1) Heat shrink tube

Compatibility:

• Axial SCX24

The Furitek Micro 2.5A BEC is mostly universal, and can be adapted to any application that needs up to a 2.5A power source, and can be powered between 7-16V (2s-4s LiPo). By default, the Micro 2.5A BEC is designed for SCX24 owners in mind, and can be used with a variety of ESCs on the market - both stock, and upgrade alternatives such as those from Furitek.

The input and output connectors feature the original JST PH2.0 style connection, allowing for ease of connectivity. The BEC output features a standard servo connector, which can be connected to any AUX channel that is open on your receiver.

Specifications:
Input Voltage: 7.4-14.8V, 2s-4s LiPo
Output Voltage: 5V @ 2.5A
Dimensions (LxW): 12x10.5mm 

This optional Furitek Parallel ESC Power Cable is used for providing a boost in voltage stability/amperage to your SCX24 when using optional ESCs. Depending on electronics equipped on your rig, aftermarket BECs can be too small and cause issues. With this parallel power cable, this allows both the external BEC and original SCX24 ESC to work together to ensure ample supply to your electronics.

Compatibility:

• Axial SCX24

Furitek CNC Aluminum Micro Komodo Motor Mount. This motor mount is intended for the Axial SCX24 chassis when using the optional Furitek Micro Komodo Motor (FTK-FUR-2100). Package includes one motor mount, one carbon fiber gear cover and hardware.

NOTE: This motor mount is only compatible with the Furitek Micro Komodo Motor (FTK-FUR-2100).

Compatibility:

• Axial SCX24

The Furitek SCX24 Brushless Gearing Conversion Set is a great option to prepare your Axial SCX24 for a brushless conversion. Using this will give you the ability to mount the optional Furitek Komodo series motor. This combo also features a pinion gear, spur gear and motor mounting screws. Get the Furitek SCX24 Brushless Gearing Conversion Set and unlock the full potential of your SCX24.

Features:

• Mount is made from CNC machined aluminum and carbon fiber
• Allows you to mount the optional Furitek Komodo series motor
• Includes pinion and spur gear for ease of setup

Includes:

• (1) CNC Motor Mount
• (1) 12T Pinion Gear
• (1) 0.5 Spur Gear
• (2) Motor Mounting Screws

Compatibility:

• Axial SCX24

This is an optional gear set for the Axial SCX24. The package includes one 12T Brass pinion gear with 3mm bore, and a CNC Aluminum 32T 0.5 Mod Spur Gear.

Compatibility:

• Axial SCX24

Furitek SCX24 Deadbolt High Clearance Carbon Fiber Links. These high clearance links are a great option for the Axial SCX24 C-10 and Jeep chassis. Weighing in at only 8.3g, these links are stronger than the stock plastic links and allow for increased ground clearance. Package includes one complete link set with pivot balls and O-rings.

Compatibility:

• Axial SCX24

• Direct fit for the Axial SCX24
• Motor mount is made from high quality carbon fiber
• Includes 11T brass pinion gear
• Motor uses metal and carbon brush technology

• (1) 80T Brushed Motor
• (1) 11T Brass Pinion
• (1) Carbon Fiber Motor Mount

Axial SCX24 drivers looking to add performance, reliability, and increased efficiency to their crawler no longer need to look far to meet those requirements. The Furitek Brushless Motor conversion kit provides you with the necessary components to take your SCX24 (with compatible brushless ESC) to a whole new level of performance.

The Komodo brushless 2204 1400kV motor features windings that are built with high quality copper wiring, thin stator laminations, and are precision balanced. These features together deliver high efficiency levels, that is incredibly reliable at all RPM levels. 

Included with the conversion kit is a aluminum motor mount which supports 2204 outrunner motors, or 2030, 2040, and 2345 inrunner type motors, a 12T brass pinion with 3mm bore, and an aluminum CNC 32T 0.5 Mod spur gear - which is a complete package that can be dropped into your vehicle when paired with a proper brushless ESC.

Motor Specifications:
kV: 1400
No load current: 0.5A
Watts: 180
Input Voltage: 7.4-14.8V (2-4s LiPo)
Resistance: 0.24ohm
Max Current: 15A
Slots & Pole Count: 12s, 14p
Motor Dimensions: 28mm diameter, 19mm height 
Stator Size: 2204
Weight: 29.5g

Compatibility:

• Axial SCX24

• Designed specifically for the Axial SCX24
• Includes the Furitek Micro Komodo Motor FTK-FUR-2100
• 12-pole motor design allows for high torque at low RPM
• Includes Micro Komodo Motor Mount
• Includes the Furitek Lizard Pro ESC

• Brushless and Brushed motor control (default is brushless)
• 2A 5.5V BEC
• 2s - 3s 7.4v-11.1v LiPo Support
• Smart device programming for Apple iOS and Android devices
• Firmware updateable (with optional bluetooth module)
• Realtime telemetry with 10Hz update rate
• AAA and LiPo battery support with auto detection
• Compatible with all transmitter and receiver types

• Axial SCX24

The Tegu dual Brushed and Brushless ESC from Furitek is flexible with it's design allowing drivers to use the original brushed motor system, or aftermarket sensorless brushless motors for Axial SCX24 vehicles. Drivers looking for improved performance, as well as further capabilities such as 3s 11.1V LiPo operation, as well as a stronger BEC for extra controls such as external lights.

Furitek focused on providing and improved crawling experience when designing new ESC's for the scale platform. Thanks to field-oriented control (FOC) technology, Tegu can allow your SCX24 to crawl at a snails pace with ease. Overall the Tegu provides stable and powerful torque, low noise, high efficiency, and offers high-speed dynamic response. 


Depending on different needs, the Tegu is offered with or without a plastic case. Most who are using the original receiver system will opt for the no case option, while those using aftermarket receivers and transmitters choose the case option.

Features at a Glance:

• Brushless and Brushed motor control (default is brushless)
• 2A 5.5V BEC
• 2s - 3s 7.4v-11.1v LiPo Support
• Smart device programming for Apple iOS and Android devices
• Firmware updateable (with optional bluetooth module)
• Realtime telemetry with 10Hz update rate
• AAA and LiPo battery support with auto detection
• Compatible with all transmitter and receiver types