This is a replacement Kyosho Wing Stay Set, and is intended for use with the Kyosho Ultima RB6 1/10 scale buggy. This package includes the wing mounts for the rear and mid motor configuration, as well as wing spacers.
This is a replacement Kyosho Wing Stay Set. These are compatible with the full line of Kyosho MP9 1/8 scale buggies. Package includes left and right side rear wing mounts, wing mount plates, a rear chassis brace mount and rear body mount.
This is an optional Kyosho V2 0° Aluminum Rear Hub Carrier Set. These hub carriers feature 0° of outboard rear toe in, and bearing inserts that allow you to use either a 5x13/5x11mm axle bearing configuration, or a 5x10/5x10 bearing configuration. Additionally, the use of bearing inserts helps to improve drive train efficiency and extend the life of the hubs.
This is an optional Kyosho RB6 Titanium Screw Set. These high quality titanium screws reduce the overall weight of the car by 8 grams for mid-motor setups, and 10 grams for rear motor setups, helping to improve the overall performance of the buggy.
This is a replacement Kyosho Suspension Bushing Set, and is intended for use with the Kyosho Inferno MP9 1/8 buggy. This set includes twenty two bushings, allowing for a variety of tuning options, as well as an economical maintenance program because the design allows replacement of the bushings, instead of the entire suspension holder.
This is a replacement Kyosho Steering Knuckle & Caster Block Set. Package includes 7° and 10° caster blocks, as well as a set of steering knuckles. These are also compatible with the ZX5 series and will provide improved steering thanks to the updated steering linkage location.
This is a set of eight Kyosho Steel Suspension Bushings. These bushings feature improved durability compared to the parts that are included with the kit. These high quality steel suspension bushings replace the stock plastic bushings and are now included as standard equipment with the Lazer ZX5 FS and RB5 SP kits.
This is a set of two replacement rear dog bone swing shafts for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. This the stock rear center dog bone that comes with the regular kits, not the Kanai and Special kits. These are the dog bones that transfer power from the rear differential out to the rear drive hubs to power the wheels.
This is a set of two replacement rear outer suspension shafts for the Kyosho Lazer ZX-5 4WD off-road buggy. These are the small suspension hinge pins that attach the rear hubs to the rear arms of the buggy.
This is a replacement Kyosho Mid Motor Rear Bulk Head, and is intended for use with the Kyosho RB6 equipped with the optional Kyosho Mid Motor Rear Stabilizer Set (KYOUMW708). This is the updated RB6 mid motor bulk head that includes a sway bar mounting point.
This is an optional Kyosho Aluminum Steering Crank Arm Set, and is intended for use with the Kyosho RB6 1/10 2wd buggy. These steering crank arms are machined from high quality Japanese Aluminum, with Kyosho's impressive Gunmetal finish and have been developed to improve the overall steering feel as well as increase the reliability of the steering system.
This is a set of fifteen replacement P6 orange O-Rings for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These small P6 orange O-Rings are used in the differentials to seal the differential outdrive shafts to the differential case to stop the silicone diff oil from leaking from the buggy.
The Kyosho MP9 TKI4 High Grade 6.8mm Steering Ball Ends are larger and stronger than the standard MP9 steering ball ends, making them more durable and better suited to handle the stresses of 1/8 off road. Additionally, these ball ends fit the pivot balls much tighter helping to prevent the ball ends from popping off the balls in a crash. Package includes eight ball ends.
These ball ends are compatible with all Kyosho applications that use the KYO1296 ball end.
This is a Kyosho Medium Length Big Bore Shock Spring Set, and is intended for use on the front of the Kyosho Ultima SC, RT5 and DB vehicles that are equipped with big bore shocks. These springs are considered medium-hard rate.
This is a set of twelve replacement 5.8mm plastic ball ends for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These 5.8mm plastic ball ends are used on the steering linkage between the steering servo and the servo saver.
This is a replacement Kyosho HD Rear Universal Swing Shaft, and is intended for use with the Kyosho MP9 TKI3 1/8 scale buggy, but can also be used optionally with the MP9 TKI2, MP9 and MP9e 1/8 scale buggies. This shaft is used in the rear-center position, is 110mm long and includes a set screw.
This is a set of two Kyosho Hard Front Upper Arms, and are intended for use with the Kyosho MP9 1/8 buggy. These are the revised MP9 front upper arms. More material has been added to the area surrounding the hinge pin, reducing the risk of breaking in the event of a hard impact. This new set of arms is made from the Kyosho 'hard' plastic compound, so the part is more rigid, and less likely to wear prematurely at the hinge pins. The Kyosho Inferno MP9 Front Upper Arm Set includes two arms, one for left side and one for the right side, 4 spacers for adjusting caster, and the upper outer ball ends.
NOTE: This part replaces discontinued part KYOIF428.
This is a set of ten Kyosho Hard Ball Ends. These are heavy duty ball ends and are much stronger than the original black ball ends, and come stock with the RB5 SP kit. These are a must have part for your Kyosho 1/10th electric and are a great addition to your Lusford turnbuckle upgrade.