ProTek RC Clear Double Sided Servo Tape Roll (1x40")
ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component.
Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
Save $ 5.00
Cool Things You Can Do With a Traxxas Link Wireless Module
1.View real-time telemetrywith beautiful high-definition graphics by installing optional telemetry sensors. See the temperature of your motor or speed control, battery voltage, or how fast you’re really going.
2.If you're handing your transmitter off to someone who hasn't driven before, selectTraining Mode in theTraxxas Link appto cut the power and speed in half until the new driver is familiar with the control. Only Traxxas has it!
3.Fine-tune your model with an Android or Apple device.TheTraxxas Link appprovides an intuitive user interface to make and save your custom settings in just seconds. Reverse a servo direction, set servo end points, or fine tune the steering rate or braking percentage with just a few taps of the screen.
Quick Features - Traxxas Link Module
Compatible with Android 4.4 and up or Apple iOS 7.0 and later platforms
Use with the powerfulTraxxas Link app, available onGoogle Playand theApp Store
View real-time telemetry withoptional sensors
Bluetooth low energy
Easy and simple device pairing
Powered by TQi transmitter
Integrated into transmitter body
Quick and easy installation, installs in minutes
Traxxas Link Wireless Module included with select Traxxas vehicles
This is a two ounce container of Miniatronics Rosin Soldering Flux Paste. This flux helps clean and pretin the solder tip in preparation of the next solder joint. Rosin fluxes are non-corrosive, non-conductive and efficient.
Save $ 5.00
Updated V2 version
Review, adjust and save Spektrum Smart ESC parameters
Connect (via USB) to a PC to update Smart ESC firmware and adjust parameters via Spektrum SmartLink PC app
Check a LiPo battery's cell balance
Needed for programing and updating the Spektrum Sensored Crawler ESC (SPMXSE1060)
Set, review, adjust and save the operating parameters of your Avian and Firma electronic speed controls using the Spektrum Smart ESC Programmer. When connected to a PC using the included USB cable, the programmer will update Smart ESC firmware and can adjust parameters through the Spektrum SmartLink app. You can also use it to check the balance of your LiPo battery cells.
Needed to Complete
Compatible Spektrum™ Smart ESC
PC with internet access
What's in the Box?
(1) Smart ESC Programmer
(1) USB Cable
(1) ESC Cable
(1) Product Manual
For use with Smart Avian & Firma Electronic Speed Controls
Castle Creations Castle Link V3 USB Programmer Adapter
This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10*
Simple programming interface for the Castle Creations Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle
Air users can customize values for low voltage cutoff, prop brake strength, governor gain and more
Suface users can customize values for low-voltage cutoff, drag brake torque limiting and more
Demo mode checks available settings without connecting device to computer
Castle Link V3 USB Programming Kit *REPLACES CSE010-0005-00*
Program your Castle brushless ESCs and accessories on your Windows PC with the Castle Link USB programming kit.
Set up of programmable options with point and click ease View your current program settings Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Download new software updates as they become available
Simple programming interface featuring: All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs). Demo Mode allows users to check available settings without connecting their Castle device to the computer Simple to install software Expanded programming and parameters for all Castle ESCs
Set-up instructions: Download the interface software from our Software area. Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit. Connect the USB cable to your PC. For more information, see the Castle Link software page.
For more information about the Castle Link software, visit the Downloads page.
Castle Link contains a proprietary interface adapter and standard USB cable. All you need is an available USB port on your PC.
System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10.
Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.
Spektrum BT2000 DX3 Smart Bluetooth Module-
Save $ 2.00
The Spektrum BT2000 is intended to add Bluetooth functionality to your Spektrum DX3 Smart Transmitter for use with the Spektrum Dashboard mobile app.
The Spektrum Dashboard mobile application allows drivers to view everything from speed, motor or engine temperature, battery voltage and more. And now with Spektrum Smart Technology integration, it is easier than ever before to get valuable telemetry data, right at your fingertips, with no additional wires or sensors.
Simply install the Spektrum Bluetooth module with your Spektrum DX3 Smart or DX2E Active transmitter and view real-time telemetry data like never before. You can also manage individual settings for RPM, temp, rx voltage and more with the options of setting alarms to indicate low voltage, high motor temperature, RPM limits and more. On top of our innovative telemetry dashboard, drivers can make even more indepth and fine adjustments to servo settings, such as travel, sub trims and auxiliary switch settings, right from the Dashboard app! Making it possible to fine tune your vehicle to your liking easy and hassle free.
Want to share your speed run with your friends? Use our Social media integration! Post a screen shot of your fastest run straight to your Facebook, Twitter or Instagram account right to your accounts with the simple touch of a button.
Installation tip:Upon initial pairing with the installed Spektrum Bluetooth module, the application will update the transmitter firmware which enables the transmitter to receive telemetry data from the onboard telemetry receiver or telemetry module. Please do not close the application or power off the transmitter during the update process. The Dashboard application will not function until the transmitter is updated.
Racer's Edge y-harness includes a JR-style male plug and FUT-style female plugs for a truly universal solution for connecting two servos or other electronic devices to one receiver port. Precision manufactured with gold-plated pins and robust yet flexible 22-gauge wire
Save $ 19.01
Over-The-Air Programming Device fits in your pocket
OTA Programmer is a module which adopted the Bluetooth communication technology for transferring data between an ESC and a smart device (Android phone, tablet, and etc). It makes the wireless communication between ESC and smart device possible; the user can easily program and upgrade ESC and monitor data transferring via this unit.
Features / Why you need this?
HOBBYWING over-the-air firmware update.
Programming through a smartphone, smart devices
Access to HW Support* User Manual, Profile manager, etc
Fail-safe feature ( Disable a throttle control when OTA programming is enabled)
*Recommend removing the unit before the official event.
The OTA Programmer module works with the following products of HOBBYWING.
Some of XERUN series & EZRUN series of car ESCs.
Some of PLATINUM series of aircraft ESCs.
Some of SEAKING series of boat ESCs.
For details, please refer to ESC manual to ensure if the ESC can work with OTA Programmer.
Working Voltage: 5V-12.6V.
Supported Bluetooth Version : ≥ 4.0 • Effective Range: 0-3m (Open Field).
ProTek RC Grey High Tack Double Sided Tape Roll (1x40")
ProTek R/C High Tack Double Sided Tape is a 40" long roll of 1" wide grey double sided tape with an extra aggressive adhesive. This tape is 1.2mm thick and is perfect for securing receivers, ESC's, transponders and much more.
The super tack adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey. Grey is recommend for cooler weather.
Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more!
Elemenates the need for a sperate battery for the reciever and servos
Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.
Current Output:Peak: 10 amps Continuous: <12 volts input = 7 amps* <24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.
Output Voltage:Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).
Input Voltage:5v to 25.2v (2S to 6S LiPo) Length:1.2” (30mm) Width:0.6” (15mm) Height:0.4” (10mm) Weight:0.4 oz (11 grams)
Save $ 3.00
This is the ProTek R/C Carbon Fiber Soldering Jig. This small and lightweight carbon fiber jig is designed to quickly and easily hold your wires, Deans, XT60 and bullet connectors to make convenient work of your soldering needs.
Featuring a spring loading sliding movement, the jig opens up when compressed allowing you to insert your wires or connectors. When compression is released, the spring loaded bottom plate pulls back with clamping force, providing a secure hold while you work.
The jig features a rectangular 17x10mm slot that securely fits Deans/T-Style and XT60 sized connectors, as well as two 8mm holes to fit the bullet connector of your choice. If you just need to solder or tin wires, the vertical posts open up to 10mm providing plenty of space for a variety of wire AWG's. To keep the jig planted, four rubber feet on the bottom keep it from moving around while you work.
Save $ 3.00
This is a Spektrum 3-Wire Switch Harness. This switch has JR style connectors on it, so it will work with most brands of battery pack and receiver. This switch harness has an integrated charging lead, so you can charge your receiver pack without having to remove it from your car.
The Castle Creations CC BEC 2.0 WP was developed for racers, crawlers, and hard core bashers with an integrated 15 amp peak power regulator in a CNC machined, waterproof (WP) aluminum case. The BEC 2.0 WP can handle up to 14S without brake enabled or 12S with brake, making this a perfect choice for high voltage applications!
The CC BEC 2.0 features heavy duty, dual output wires that will provide clean power to sensitive radio equipment. Castle Link (not included) can be used to set the output from 4.75 to 12 volts, easily handling power hungry servos, cameras, and other accessories.
NOTE:CC BEC 2.0 should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit.
Castle Creations BEC 2.0 BEC Voltage Regulator (14 Amp).
The CC BEC 2.0 complements an established line of BECs hobbyists have relied on for years. With hundreds of thousands in the field, users can count on this new design to power today’s high-power, digital servos and accessories safely.
The CC BEC 2.0 features heavy-duty, dual output wires that provide clean power to sensitive radio equipment and has a peak current rating of up to 14A. Use of a Castle Link (CSE011011900) programming accessory can be used to set the output from 4.75 to 12 volts and power today’s power hungry servos, cameras, and other accessories. Do it right the first time, invest in the CC BEC 2.0 to protect expensive electronics for the long haul.
Note:CC BEC 2.0 should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit.
Adjustable Output Voltage may be set with Castle Link (sold separately).
DuraTrax TrakPower TK955 Digital Soldering Station
Save $ 46.00
Digital LED display shows selected temperature, heating status and operational alerts. Simple push-button controls adjust heat in precise 1° increments. Security key locks in selected temperature, preventing accidental changes. Holds selected temperature within 1.8°F (1°C) while idle.
Digital Temperature Control Unit
Heavy-Duty Soldering Iron with Ceramic Heat Element
Soldering Iron Chisel and Pencil Tips
Iron Stand with Sponge
Ready-to-Apply Decals for Temperature Control Unit, Soldering Iron and Iron Stand
1 year limited warranty.
Select iron heat with push-button ease. Settings are shown on an easy-to-read digital display.