Name: Center Diff 46T Spur Gear Lightweight: 8X
Brand: TLR
SKU: TLR342021
Price: 24.99 USD
Availability: InStock

TLR

Center Diff 46T Spur Gear Lightweight: 8X
TLR342021

$ 29.99 $ 24.99 Save $ 5.00

Compatibility:

Losi 8IGHT XT/XTE
Losi 8IGHT-X Elite

TLR

Team Associated 48P Kevlar® Spur Gear, 76T: 22 Discontinued
TLR3979

$ 4.99

Team Associated 48P Kevlar® Spur Gear, 76T: 22

TLR

Team Associated RC10B74.1 23mm Carbon Fiber Front Shock Tower
TLR231092

$ 8.99 $ 7.99 Save $ 1.00

This is a replacement Team Associated RC10B74.1 23mm Carbon Fiber Front Shock Tower, intended for use with the RC10 B74.1 and B74.1D Team 1/10 4WD Electric Buggy Kits.

Compatibility:

Team Associated RC10 B74.1
Team Associated RC10 B74.1D

Team Losi Racing "Low Frequency" Front Spring Set (4 pair) **

TLR

Team Losi Racing "Low Frequency" Front Spring Set (4 pair) **
TLR233012

$ 21.99 $ 11.99 Save $ 10.00

This is an optional Team Losi Racing "Low Frequency" Front Spring Set. The Low Frequency Spring Sets deliver a plush suspension feel with increased grip and improved stability. They also land better allowing for a less aggressive rebound as the car settles quicker and more consistently. The included springs are only separated by .12 lbs/in increments allowing for very fine changes, allowing you to get your 22 dialed in.

Features:

Low Frequency: Allow for a plush feel on the track with more grip and consistency
Full Set Included: All four of the Low Frequency Springs available for the 22 buggy for the front will be available in this single package for easy tuning
Paint Markings: Each spring is marked with a paint swatch at the end of the spring for easy identification
Black Oxide Finish: The black oxide finish works as protection from corrosion and also make the springs easily identifiable against the original 22 springs which have black paint

Included Spring Rates:

Softest

Pink: 2.86 lbs./in - 9.25 coils
Red: 2.96 lbs./in - 9.00 coils
Orange: 3.03 lbs./in - 8.75 coils
Silver: 3.18 lbs./in - 8.50 coils

Stiffest

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer

Team Losi Racing +1mm Wheel Hex Set (4) **

TLR

Team Losi Racing +1mm Wheel Hex Set (4) **
TLR242004

$ 22.99 $ 19.99 Save $ 3.00

This is a replacement Team Losi Racing +1mm Wheel Hex Set, and is intended for use with the Losi 8IGHT 3.0 1/8 buggy. These hexes are used on the rear of the 8IGHT 3.0 buggy, but can also be used on the front as a tuning option.

Compatibility:

Losi 8IGHT 3.0
Losi 8IGHT 4.0
Losi 8IGHT-E 3.0
Losi 8IGHT-E 4.0
Losi 8IGHT-T 4.0

Team Losi Racing 0° & 4° Center Differential Locator Set **

TLR

Team Losi Racing 0° & 4° Center Differential Locator Set **
TLR241021

$ 19.99

This is a replacement Team Losi Racing 0° & 4° Center Differential Locator Set, used to mount the center diff straight and inline in the chassis with the 0° plate, or at a slight angle with the 4° plate.

Compatibility:

Losi 8IGHT-E 4.0

TLR

Team Losi Racing 0° Caster Block Set (TLR 22) Discontinued
TLR1060

$ 5.99

This is a Team Losi Racing 0° Caster Block Set, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

Losi 22
Losi 22SCT
Losi 22T
Losi 22T 2.0

TLR

Team Losi Racing 1/8 8IGHT-XE Elite Electric Buggy Kit
TLR04011

$ 729.99 $ 649.99 Save $ 80.00

Features

Wide Chassis Layout
Updated Radio Tray
Updated Rear CVAs
Updated Chassis Side Guards
Bleeder Shock Caps
Redesigned “Black” Shock Towers
Optimized Shocks
Cab Forward Style Body
Improved Sway Bar System
Easy Diff Access
Larger Pinion Bearing
Redesigned Steering Rack
Aluminum Motor Mount
Adjustable Suspension Arms
Aluminum Front Brace
Lightweight Battery Mount
Improved Suspension Geometry
Carbon Center Diff Brace
Equalized Driveline
Adjustable 17.5 Degree Castor Blocks

Overview

Features

Pro Level Race Ready
7075 - 3mm Aluminum Chassis
Updated Rear CVAs
Front Universals included
Aluminum Front Brace for Smoother Steering
+1 Hexes for Stability in High Speed Turns
Two Wings and Wing Riser
Steering Rack Updated
Bleeder Shock Caps
Improved Suspension Arms
Shock Towers with Updated Camber Link Holes

Better Diff Access
Optimized Shocks
Cab Forward Style Body
Equalized driveline
Improved Suspension Geometry
Larger Pinion Bearing
Adjustable Caster Blocks
Sway Bar System
Chassis Side Guards
Rear Mud Guards
Lightweight Battery Mounting System

Overview

The all-new Team Losi Racing^® 8IGHT-XE ELITE buggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat. Plus, it includes the option parts our award-winning race team uses to win races around the world. It's ready for high-level competition right out of the box. The 8IGHT-XE ELITE has a combination of features second-to-none including carbon center diff brace, 3.5mm shock shafts, aluminum front brace, front universals, 10mm wing riser, wider hexes, new pistons, carbon fiber arm inserts, poly-carbonate wing, updated rear CVA axles, and so much more. In a class all by itself, the 8IGHT-XE ELITE buggy is designed for the elite racer and podium-ready.

Pro Level Race Ready

The 8IGHT-XE ELITE now includes the option parts our elite level race team utilizes to win races around the world, thus making for a vehicle that is high level competition ready right out of the box. Included option parts are carbon center diff brace, 3.5mm shock shafts, aluminum front brace, front universals, 10mm wing riser, wider hexes, new pistons, carbon fiber arm inserts, poly-carbonate wing, and updated rear CVA axle.

7075 3mm Aluminum Chassis

A new ELITE chassis that moves weight forward and decreases wheelbase is included to give the car more overall grip. Chassis width has been increased from the 4.0 to X to aid in stability and give the buggy a more neutral feel.

Updated rear CVAs

The 8IGHT XE ELITE will include rear CVAs with an updated axle and shaft providing more overall rear grip to the car and better tracking through the bumpy conditions.

Front Universals included

The 8IGHT XE ELITE will includes updated universals for the front which makes the car smoother existing turns and aids in the flow in bumpy track conditions.

Aluminum Front Brace

The 8IGHT XE ELITE includes an updated aluminum front brace that provides smoother steering response.

+1 Hexes

Updated +1mm width hexes are included for the rear of the 8IGHT XE ELITE to add stability in high speed turns.

Two Wings and Wing Riser

The 8IGHT XE ELITE includes updates to both the IFMAR wing as well as our polycarbonate wing. We also include a 10mm wing riser for added rear grip.

New Aluminum Motor Mount

Lightweight and durable motor mount that aids in heat dissipation and is easy to adjust for quick gearing changes. The motor is now mounted to the chassis rather than hanging off the center diff for added durability.

Steering Rack

The steering rack allows more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads.

Bleeder Shock Caps

Updated machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil. New bladders are also included for better bump handling.

Suspension Arms

Webbing added between inner mounting tabs to ensure hinge pin fitment. Mold updated to increase strength. Suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The Elite kit will include both molded plates and carbon plates.

Shock Towers

The 8IGHT XE ELITE now includes black anodized machined 7075-T6 aluminum shock towers with updated camber link holes previously included with the 8XE.

Better Diff Access

The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle. The front diff case has been updated to allow better fitment of the front arms while the rear case has been updated to increase the strength of the area holding the shock tower.

Optimized Shocks

The 8IGHT XE ELITE shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car as well as offer the use of both 3.5mm and 4.0mm shock shafts.

Cab Forward Style Body

A cab forward design helps with overall down force, which improves steering and overall stability. Cut lines have been updated for ease of installation and changing of settings.

Equalized Driveline

The center drive shaft angles have been modified so they are equal front to rear allowing for a more 4WD feel to the vehicle.

Improved Suspension Geometry

The 8IGHT XE ELITE suspension geometry has been completely revamped making a car that is fast, nimble, and easy to drive. This includes a myriad of updates including longer front and rear arms, wider front pivot with less scrub radius, narrower rear pivot, and updated hub offset.

Larger Pinion Bearing

The pinion bearing size inside the front and rear gear boxes has been increased for added durability.

Adjustable Caster Blocks

17.5 degree caster blocks are included that allow the height of the spindle to be adjusted up and down for more or less high-speed stability.

Sway Bar System

Sway bar system that has collars that eliminate side to side play to provide a more consistent suspension package.

Chassis Side Guards

The chassis side guards have an improved fit onto the chassis.

Rear Mud Guards

The 8IGHT XE ELITE comes standard with rear axle mud guards. These guards not only protect your rear axles and bearings from damage during rough and wet conditions, they also keep your axles running smooth and precise in all conditions.

Lightweight Battery Mounting System

The 8IGHT XE ELITE features a newly designed battery mounting system that not only saves weight, but it also makes battery installation and removal quick and easy.

Specifications

Approximate Assembly Time: 3-5 hours
Ball Bearings: Yes
Battery: Sold Separately
Body: 8XE Unpainted
Brakes: Integral with ESC (ESC sold separately)
Charger: Sold Separately
Chassis: 0.12" (3mm) 7075 aluminum
Completion Level: Kit
Differential: Sealed viscous filled gear type
Drive Type: Forward/Brake/Reverse
Drivetrain: 4WD
Gear Pitch: MOD1
Ground Clearance: 2.4" (60mm)
Internal Gear Ratio: 3.23:1
Max Battery Dimensions: 5.4 x 1.8 x 1.5 in (138 x 47 x 40mm)
Pinion: 15T
Power Type: Electric
Product Height: 7.1" (180 mm)
Product Length: 19.6" (498 mm)
Product Width: 12.1" (307 mm)
Radio: Sold Separately
Receiver: Sold Separately
Scale: 1/8
Servos: Sold Separately
Shock Type: Aluminum body, oil-filled
Speed Control: Sold Separately
Spur Gear: 46T
Suspension: Independent
Track: 12.1 in (307mm) front and rear
Vehicle Type: Buggy
Water-Resistant: Yes
Wheelbase: 12.8 - 13 in (326 - 329mm)

Team Losi Racing 12mm 22-4 Wheel Hex Set (4) **

TLR

Team Losi Racing 12mm 22-4 Wheel Hex Set (4) **
TLR232028

$ 10.00 $ 8.99 Save $ 1.01

This is a replacement Team Losi Racing Wheel Hex Set. This set includes two aluminum front hexes and two composite rear hexes.

Compatibility:

Losi 22-4

Team Losi Racing 12mm Aluminum Rear Hex Set (Standard Width) (TLR 22) **

TLR

Team Losi Racing 12mm Aluminum Rear Hex Set (Standard Width) (TLR 22) **
TLR2930

$ 21.99

This is a Team Losi Racing Aluminum Rear Hex Set, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0 SPEC-Racer
Losi 22 5.0 AC
Losi 22 5.0 DC
Losi 22 5.0 SR
Losi 22SCT 3.0

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.1x4) **DISCONTINUED

TLR

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.1x4) **DISCONTINUED
TLR233019

$ 14.99

This is a pack of four optional Team Losi Racing 12mm CNC Machined Shock Pistons. These pistons feature four 1.1mm holes.

Through continued testing with the 22 platform shocks on the SCTE vehicles, the race team has found a much improved balance with the 4-hole pistons providing the best balance for the heavier SCTE vehicles.

Features:

CNC Machine to closely match the tolerance of the shock body bore and the shock shaft to increase consistency and performance versus molded pistons
4-Hole pistons with smaller holes provide a more plush feel in bumps and off big jumps for better balance
Each Piston is milled with the numeric value of the size of each hole

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22SCT
Losi 22SCT 2.0
Losi 22T
Losi 22T 2.0
Losi TEN-SCTE
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.4x3) **

TLR

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.4x3) **
TLR233018

$ 14.99

This is a pack of four optional Team Losi Racing 12mm CNC Machined Shock Pistons. These machined pistons will provide precision tolerances in your 22/T and SCTE series 12mm shocks, as well as provide you the option of a 3 hole piston with 1.4mm holes. Each piston is marked with "1.4" for easy identification on one side. These are not tapered pistons.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22SCT
Losi 22SCT 3.0
Losi 22T
Losi 22T 2.0
Losi TEN-SCTE
Losi TEN-SCTE 2.0

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) **

TLR

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.5x2) **
TLR233008

$ 14.99

This is the Team Losi Racing 12mm CNC Machined Shock Piston Set. These shock pistons are CNC machined for a precision fit inside the shock body. These optional shock pistons fit the 22 2.0, and can also be used as an optional upgrade for the first generation 22, 22T, 22SCT and SCTE vehicles.

Features:

CNC Machined to closely match the tolerance of the shock body bore and the shock shaft to increase consistency and performance versus molded pistons
Each piston has two 1.5mm holes
2-Hole pistons give more pack without make the car 'stiffer' around ride height and while cornering
Each Piston is milled with the numeric value of the size of each hole
Compatible with all 22 series vehicles, as well as the TEN-SCTE

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22-4 2.0
Losi 22SCT
Losi 22SCT 2.0
Losi 22SCT 3.0
Losi 22T
Losi 22T 2.0
Losi TEN-SCTE
Losi TEN-SCTE 2.0

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.6x2) **

TLR

Team Losi Racing 12mm CNC Machined Shock Piston (4) (1.6x2) **
TLR233009

$ 14.99

This is the Team Losi Racing 12mm CNC Machined Shock Piston Set. These shock pistons are included with the 22 2.0, but can also be used as an optional upgrade for the first generation 22, 22T and 22SCT vehicles.

Features:

CNC Machined to closely match the tolerance of the shock body bore and the shock shaft to increase consistency and performance versus molded pistons
Each piston has two 1.6mm holes
2-Hole pistons give more pack without make the car 'stiffer' around ride height and while cornering
Each Piston is milled with the numeric value of the size of each hole
Compatible with all 22 series vehicles, as well as the TEN-SCTE

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer
Losi 22SCT
Losi 22SCT 2.0
Losi 22SCT 3.0
Losi 22T
Losi 22T 2.0
Losi 22T 3.0
Losi 22T 4.0
Losi TEN-SCTE
Losi TEN-SCTE 2.0

Team Losi Racing 12mm Hex 1/10 4WD Front Buggy Wheels (2) (White) (22-4) **

TLR

Team Losi Racing 12mm Hex 1/10 4WD Front Buggy Wheels (2) (White) (22-4) **
TLR43005

$ 8.99 $ 7.99 Save $ 1.00

This is a pack of two yellow Team Losi Racing 22-4 Front Wheels. These wheels feature a 12mm hex and were developed specifically for the TLR 22-4 series vehicles.

Compatibility:

Losi 22-4

TLR

Team Losi Racing 12mm Hex 1/10 4WD Front Buggy Wheels (2) (Yellow) (22-4)
TLR43004

$ 8.99 $ 7.99 Save $ 1.00

This is a pack of two yellow Team Losi Racing 22-4 Front Wheels. These wheels feature a 12mm hex and were developed specifically for the TLR 22-4 series vehicles.

Compatibility:

Losi 22-4
Losi 22-4 2.0

TLR

Team Losi Racing 12mm Hex 1/10 Rear Buggy Wheels (Yellow) (2) (22 3.0/22-4)
TLR7101

$ 9.00 $ 7.99 Save $ 1.01

This is a Team Losi Racing Rear 1/10 Buggy Wheel, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer
Losi 22 5.0 AC
Losi 22 5.0 DC
Losi 22 5.0 SR
Losi 22-4
Losi 22-4 2.0

TLR

Team Losi Racing 12mm Hex 2.2" 1/10 Stadium Truck Wheels (2) (TLR 22T) (Yellow)
TLR7002

$ 12.99 $ 10.99 Save $ 2.00

This is a package of two Team Losi Racing 2.2" 1/10 Stadium Truck Wheels, and are intended for use with the TLR 22T 1/10 stadium truck. These wheels can be used in either the front or rear position.

Compatibility:

Losi 22T
Losi 22T 2.0
Losi 22T 3.0
Losi 22T 4.0

Team Losi Racing 12mm Hex 61mm 1/10 Rear Buggy Wheels (White) (2) (22 3.0/22-4) **

TLR

Team Losi Racing 12mm Hex 61mm 1/10 Rear Buggy Wheels (White) (2) (22 3.0/22-4) **
TLR43015

$ 10.00 $ 8.99 Save $ 1.01

This is a pack of two Team Losi Racing 12mm Hex 61mm Rear 1/10 Buggy Wheels. These wheels feature a 61mm diameter for larger tires and a 12mm axle hex. These wheels are suitable for the 22-4 and 22 line of 2wd buggies.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22-4

Team Losi Racing 12mm Hex 61mm 1/10 Rear Buggy Wheels (Yellow) (2) (22 3.0/22-4)

TLR

Team Losi Racing 12mm Hex 61mm 1/10 Rear Buggy Wheels (Yellow) (2) (22 3.0/22-4)
TLR43016

$ 9.99 $ 8.99 Save $ 1.00

This is a pack of two Team Losi Racing 12mm Hex 61mm Rear 1/10 Buggy Wheels. These wheels feature a 61mm diameter for larger tires and a 12mm axle hex. These wheels are suitable for the 22-4 and 22 line of 2wd buggies.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22-4

Team Losi Racing 12mm Hex 61mm 4WD Front Buggy Wheels (2) (White) (22-4) **

TLR

Team Losi Racing 12mm Hex 61mm 4WD Front Buggy Wheels (2) (White) (22-4) **
TLR43013

$ 10.00 $ 8.99 Save $ 1.01

This is a pack of two Team Losi Racing 12mm Hex 22-4 61mm Front Wheels. These are 61mm diameter front wheels with a 12mm hex. For use with the 22-4 buggy.

Compatibility:

Losi 22 3.0
Losi 22 3.0 SPEC-Racer

Team Losi Racing 12mm Hex 61mm 4WD Front Buggy Wheels (2) (Yellow) (22-4)

TLR

Team Losi Racing 12mm Hex 61mm 4WD Front Buggy Wheels (2) (Yellow) (22-4)
TLR43014

$ 10.00 $ 8.99 Save $ 1.01

This is a pack of two Team Losi Racing 12mm Hex 22-4 61mm Front Wheels. These are 61mm diameter front wheels with a 12mm hex. For use with the 22-4 buggy.

Compatibility:

Losi 22 3.0
Losi 22 3.0 SPEC-Racer

Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (2) (22 3.0) (White)

TLR

Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (2) (22 3.0) (White)
TLR43009

$ 9.00 $ 7.99 Save $ 1.01

Team Losi Racing 22 3.0 Front 1/10 Buggy Wheels. These are the standard diameter front wheels, with a 12mm hex. Package includes two wheels.

Compatibility:

Losi 22 3.0
Losi 22 3.0 SPEC-Racer

Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (2) (22 3.0) (Yellow) **

TLR

Team Losi Racing 12mm Hex Front 1/10 Buggy Wheels (2) (22 3.0) (Yellow) **
TLR43010

$ 9.00 $ 7.99 Save $ 1.01

Team Losi Racing 22 3.0 Front 1/10 Buggy Wheels. These are the standard diameter front wheels, with a 12mm hex. Package includes two wheels.

Compatibility:

Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer

Team Losi Racing 12mm Hex Short Course Wheels (Black) (2) (22SCT/TEN-SCTE) **

TLR

Team Losi Racing 12mm Hex Short Course Wheels (Black) (2) (22SCT/TEN-SCTE) **
TLR7011

$ 11.99 $ 9.99 Save $ 2.00

This is a pack of two replacement Team Losi Racing Black Wheels, and are intended for use with the Team Losi Racing 22SCT 1/10 scale short course truck.

Compatibility:

Losi 22SCT
Losi 22SCT 2.0
Losi 22SCT 3.0
Losi TEN-SCBE
Losi TEN-SCT Nitro
Losi TEN-SCTE
Losi TEN-SCTE 2.0
Losi TEN-SCTE 3.0

TLR

Team Losi Racing 12mm Hex Stiffezel Front 2WD Buggy Wheels (Yellow) (2) (22 4.0)
TLR43018

$ 8.99 $ 7.99 Save $ 1.00

Using the same design as the standard TLR wheels, the Stiffezel front wheels have been molded from stiffer composite, which allows the wheel to flex less under higher load. During testing, the team has found these wheels to create more consistency high speed, while adding more steering in longer, high load turns. The best analogy used by a tester was, "The Stiffezel front wheels make it feel like I tightened a servo saver, even though the 22's don't have one."

Features:

Marked with an "S" inside of the wheel
12mm hex mounting
Fits all 22 buggies with 12mm hexes

Compatibility:

Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
Losi 22 4.0
Losi 22 4.0 SPEC-Racer
Losi 22 5.0 DC
Losi 22 5.0 Elite
Losi 22 5.0 SR
Losi TEN-SCTE 3.0

Team Losi Racing 12mm Low Frequency Rear Springs (Red) (2) **

TLR

Team Losi Racing 12mm Low Frequency Rear Springs (Red) (2) **
TLR233059

$ 6.99

TLR 12mm Low Frequency Rear Springs are stiffer than standard silver springs that come with all 22 vehicles. From testing, TLR drivers found that having this wider range of springs is beneficial for all the different surface situations faced in racing today from 1/10th clay to 1/10th turf or carpet.

**Effects of Shock Spring Changes**
Shock Spring	Characteristic
Softer	Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out
Stiffer	Decreased Chassis Roll Decreased Traction Increased Responsiveness

Compatibility:

Losi 22 5.0 AC
Losi 22 5.0 DC
Losi 22 5.0 SR

TLR

Team Losi Racing 12mm Shock Bladder Set (4) (TLR 22) Discontinued
TLR5089

$ 3.99

This is a Team Losi Racing 12mm Shock Bladder Set, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

Losi 22
Losi 22 2.0
Losi 22SCT
Losi 22T
Losi 22T 2.0

TLR

Team Losi Racing 15° Front Spindle Carrier Set (2)
TLR244004

$ 18.99 $ 16.99 Save $ 2.00

This is a replacement Team Losi Racing 15° Front Spindle Carrier Set, and is intended for use with the Losi 8IGHT 3.0 1/8 buggy. Package includes two spindle carriers.

Compatibility:

Losi 8IGHT 3.0
Losi 8IGHT Nitro RTR
Losi 8IGHT RTR
Losi 8IGHT-E 3.0
Losi 8IGHT-E RTR
Losi 8IGHT-T Nitro RTR

Team Losi Racing 15° TEN-SCTE 3.0 Front Spindle Carrier Set **

TLR

Team Losi Racing 15° TEN-SCTE 3.0 Front Spindle Carrier Set **
TLR234068

$ 9.99 $ 8.99 Save $ 1.00

This is a replacement Team Losi Racing 15° Front Spindle Carrier Set for the TEN-SCTE 3.0.

Compatibility:

Losi TEN-SCTE 3.0

Team Losi Racing 16mm 1.3mm Shock Piston (2) **

TLR

Team Losi Racing 16mm 1.3mm Shock Piston (2) **
TLR243011

$ 12.99 $ 10.99 Save $ 2.00

This is a pack of two replacement Team Losi Racing 16mm 1.3mm Shock Pistons, and are intended for use with the Losi 8IGHT 3.0 1/8 buggy.

Compatibility:

Losi 8IGHT 3.0
Losi 8IGHT 4.0
Losi 8IGHT-E 4.0

TLR

Team Losi Racing 16mm 5-Hole Machined Piston Set (1.4 & 1.5mm)
TLR243023

$ 23.99 $ 20.99 Save $ 3.00

This is a replacement Team Losi Racing 16mm 5-Hole Machined Piston Set. This set includes two 1.4 and two 1.5mm pistons. The stock setup is the 1.4mm pistons up front and the 1.5mm pistons in the rear.

Compatibility:

Losi 8IGHT-E 3.0
Losi 8IGHT-X
Losi 8IGHT-XE Race