Crawling Parts



Traxxas TRX-4 LED Power Supply w/3-In-1 Wire Harness **

Traxxas TRX-4 LED Power Supply w/3-In-1 Wire Harness **

$ 19.95 Save $ 2.05

The Traxxas TRX-4 LED Power Supply is a regulated, 3V, 0.5-amp power source designed to work with Traxxas LED lights (TRA8025, TRA8026, TRA8027). Adding LED lighting components to your TRX-4 is simple with the waterproof Traxxas power supply. This unit provides stable, regulated output with batteries ranging from NiMH to 3S LiPo. The power supply connects to the receiver and electronic speed control to provide single-point control of your lighting components, and the included 3-in-1 wire harness allows the full...

RC4WD "Warn" 9.5cti 1/10 Scale Winch (Miniature Scale Accessory) **

RC4WD "Warn" 9.5cti 1/10 Scale Winch (Miniature Scale Accessory) **

$ 34.99 Save $ 8.05

This is an optional RC4WD "Warn" 9.5cti 1/10 Scale Winch. With one of the most iconic names in off-road, this winch offers ultra scale looks, and superior quality and craftsmanship. Officially Licensed by Warn. Features: Cast Aluminum Case Stamped Steel Components Working Spring Loaded Warn Hook Synthetic Winch Rope Highly Detailed Full Warn Decals Installed Voltage: 6v to 11.1v Can operate on 3 Cell Lipo Easily Rebuildable 3ft/.9M Rope Pre-Installed Same Mounting Locations as Bulldog Winch Load Limits: Dead Lift...

Pro-Line 5" Curved Super-Bright LED Light Bar Kit (6V-12V) **

Pro-Line 5" Curved Super-Bright LED Light Bar Kit (6V-12V) **

$ 48.99 Save $ 11.96

The Pro-Line 5" Curved Super-Bright LED Light Bar Kit features 26 LED bulbs and has been pre-wired with a 12” long cable that can plug directly into your receiver for power. The Lights are rated for 6V to 12V power, so you also have the option to plug directly into a 3S lipo power source for incredibly bright LED Light! The LED Lights are housed in a durable Black Nylon housing branded with a P-L logo and includes the mounts...

Traxxas Mod 0.8 TRX-4 Spur Gear (45T)

Traxxas Mod 0.8 TRX-4 Spur Gear (45T)

$ 3.00

This is a replacement Traxxas 45 Tooth Mod 0.8 TRX-4 Spur Gear.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Rigid LED Lightbar (Fits TRA8011 Body, Requires TRA8028 Power Supply) **

Traxxas TRX-4 Rigid LED Lightbar (Fits TRA8011 Body, Requires TRA8028 Power Supply) **

$ 29.95 Save $ 0.05

The Traxxas TRX-4 Rigid LED Lightbar is an officially licensed light bar developed specifically for the Traxxas Defender body (TRA8011), and features 72 LEDs with a built in on/off switch. Light bar requires the Traxxas TRA8028 power supply.  Designed to the rigorous standards of both Traxxas and leading lighting manufacturer RIGID, the LED light bar utilizes surface mount LED technology and a custom clear lens for unsurpassed realism. The integrated switch controls the brightness of both the light bar and...

Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear (12/33T) **

Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear (12/33T) **

$ 39.95 Save $ 5.05

The Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is overdriven compared to the stock gear ratio, meaning it will provide increased wheelspeed. This gear is more durable than the stock parts and is better suited to high power ESC/Motor systems. Package includes one 33T ring gear and one 12T pinion gear. A popular tuning option is to overdrive the front axle, and underdrive...

Traxxas TRX-4 Bumper D-Rings (Red) (4) **

Traxxas TRX-4 Bumper D-Rings (Red) (4) **

$ 3.00

This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with included mounting hardware.  TRAXXAS TRX-4

Options
Yeah Racing Traxxas TRX-4 12mm Brass Hex Adapter w/8mm Offset (4) **

Yeah Racing Traxxas TRX-4 12mm Brass Hex Adapter w/8mm Offset (4) **

$ 11.99

The Yeah Racing Traxxas TRX-4 12mm Brass Hex Adapters are a direct replacement upgrade for the stock wheel hexes. These add a total of 27 grams of unsprung weight, and have an 8mm offset for increased track width. Package includes four hex adapters. Compatibility: Traxxas TRX-4

RC4WD "Warn" Wireless Winch Controller w/Remote & Receiver (Miniature Scale Accessory) **

RC4WD "Warn" Wireless Winch Controller w/Remote & Receiver (Miniature Scale Accessory) **

$ 45.99 Save $ 10.58

This is the RC4WD "Warn" Wireless Winch Remote and Receiver Unit. This Warn Wireless Winch Controller Set is Officially Licensed by the Warn Industries and are only available from RC4WD. Features: 2.4 GHz Technology Over 10ft Range Batteries Included Small Compact Size 2- and 3-cell LiPo Compatible Operating Voltage 6V to 11.1V Easy Plug and Play Specifications: Remote:  Total Length: 2in / 50.5mm Total Width: 1in / 25mm Height: 0.53in / 13.5mm Weight: 0.38oz / 11g Receiver:  Length: 1.6in / 40.4mm Width: 1.2in / 30.2mm Height: 0.37in /...

Traxxas TRX-4 Defender Led Headlight/Tail Light Kit (Fits TRA8011 Body, Requires TRA8028 Power Supply) **

Traxxas TRX-4 Defender Led Headlight/Tail Light Kit (Fits TRA8011 Body, Requires TRA8028 Power Supply) **

$ 19.95 Save $ 3.05

The Traxxas TRX4 Defender Led Headlight/Tail Light Kit includes two headlight pods, and two tail light pods developed specifically for the Traxxas Defender body (TRA8011). Lights require the Traxxas TRA8028 power supply.  The LED headlight and tail light harness is a direct replacement for the factory lens components. Fourteen total bright white LEDs bring the headlights to life, while secondary lights illuminate the amber parking lights and red tail lights for a true scale look.   Compatibility: TRAXXAS TRX-4

Traxxas TRX-4 GTS Spring Retainer Set **

Traxxas TRX-4 GTS Spring Retainer Set **

$ 5.00

This is a replacement Traxxas TRX-4 GTS Spring Retainer Set.  Compatibility: TRAXXAS TRX-4

Traxxas TRX-4 Bumper Mounts **

Traxxas TRX-4 Bumper Mounts **

$ 7.00

This is a replacement Traxxas TRX-4 Bumper Mount Set with included mounting hardware.  Compatibility: Traxxas TRX-4  

SSD RC SCX10 II AR44 Heavy Brass Steering Knuckles **

SSD RC SCX10 II AR44 Heavy Brass Steering Knuckles **

$ 44.99

SSD SCX10 II Heavy Brass Knuckles are compatible with the stock SCX10 II AR44 axle housing, as well as the optional SSD Pro44 Axle. Weighing in at 70 grams each, these knuckles offer up a 140 gram weight gain for improved front/rear weight balance. Plus, the gun metal grey finish delivers a scale look that cannot be matched by raw brass material.  Features:  CNC machined brass Gun metal grey color Fits stock Axial SCX10 II C hubs, bearings & hardware Weight:...

Axial Aluminum Servo Horn (25T) **

Axial Aluminum Servo Horn (25T) **

$ 15.99 Save $ 2.00

This is an optional Axial 25 Tooth Aluminum Servo Horn, and is intended for use with the Axial Wraith, Scorpion, SCX and XR10 trucks. If you drive your Axial based rig hard, then you already know how tough the rocks can be on a servo horn. Upgrading to Axial's HD aluminum servo horns will give you added piece of mind on those all day expeditions. Features:  CNC machined from 6061 billet aluminum for precision and strength Hard anodized for durability Available...

Traxxas TRX-4 Steering Servo Mount & Chassis Crossmember

Traxxas TRX-4 Steering Servo Mount & Chassis Crossmember

$ 6.00

This is a replacement Traxxas TRX-4 Steering Servo Mount and Chassis Crossmember.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Rod End Set **

Traxxas TRX-4 Rod End Set **

$ 15.00

This is a replacement Traxxas TRX-4 Rod End Set.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Portal Drive Caster Block Set **

Traxxas TRX-4 Portal Drive Caster Block Set **

$ 5.00

This is a replacement Traxxas TRX-4 Portal Drive Caster Block Set.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Plastic Center Half Shaft Set **

Traxxas TRX-4 Plastic Center Half Shaft Set **

$ 8.00

This is a replacement Traxxas TRX-4 Plastic Center Half Shaft Set.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Motor Plate & Upper Spur Gear Cover **

Traxxas TRX-4 Motor Plate & Upper Spur Gear Cover **

$ 3.00

This is a replacement Traxxas TRX-4 Motor Plate and Upper Spur Gear Cover.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Front & Rear Body Mount & Post Set **

Traxxas TRX-4 Front & Rear Body Mount & Post Set **

$ 8.00

This is replacement Traxxas TRX-4 Front and Rear Body Mount and Post Set.  TRAXXAS TRX-4

Traxxas TRX-4 Front & Rear Axle Mount Set **

Traxxas TRX-4 Front & Rear Axle Mount Set **

$ 4.00

This is a replacement Traxxas TRX-4 Front and Rear Axle Mount Set.  Compatibility: Traxxas TRX-4

SSD RC TRX-4 / SCX10 II Scale Steel Long Rear Driveshaft **

SSD RC TRX-4 / SCX10 II Scale Steel Long Rear Driveshaft **

$ 29.99

SSD TRX-4 / SCX10 II Scale Steel Long Rear Driveshaft.  Features:  CNC Machined Hardened Steel Scale design Fully assembled Precision splines Up to 50 degrees operating angle Includes M4 screw pins (SSD00237) Compatible with Axial M4 scew shaft (AX31045) Suitable for rear of 324mm wheelbase Traxxas TRX-4 (Land Rover D110, Tactical) Suitable for rear of 313mm wheelbase Axial SCX10 II kit version with 2 speed transmission Fits 5mm diameter shafts M4 set screw Specifications: Min length (pin to pin): 116mm Max length (pin...

Traxxas TRX-4 Rear T-Lock Cable **

Traxxas TRX-4 Rear T-Lock Cable **

$ 12.00

This is a replacement Traxxas TRX-4 Rear T-Lock Cable.  Compatibility: TRAXXAS TRX-4

Axial 2.0x11mm Pin (6) **

Axial 2.0x11mm Pin (6) **

$ 4.99

This is a pack of six replacement Axial 2.0x11mm Pins. These hardened steel pins are compatible with the Axial WB8 HD driveshaft couplers.  Compatibility: Axial Capra 1.9 Axial RR10 Bomber Axial SCX10 II Axial SCX10 III Axial SMT10 Axial Wraith Axial Wraith 1.9 Axial Yeti Axial Yeti SCORE Axial Yeti XL

Traxxas Turnbuckles,72mm:Hawk 2,ST **

Traxxas Turnbuckles,72mm:Hawk 2,ST **

$ 2.00

Replace the non-adjustable camber links on your Rustler with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors)  

Traxxas TRX-4 Wheel Hub Hexes (2) **

Traxxas TRX-4 Wheel Hub Hexes (2) **

$ 5.00

This is a pack of two replacement Traxxas TRX-4 Wheel Hub Hexes.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Steering Draglink **

Traxxas TRX-4 Steering Draglink **

$ 7.00

This is a replacement Traxxas TRX-4 Steering Draglink.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Spool **

Traxxas TRX-4 Spool **

$ 10.00

The Traxxas TRX-4 Spool gives TRX-4 owners the option to remove the locking differentials, and replace one or both with this spool. This will provide a full time locked differential, for reduced complexity and increased crawling performance. Package includes one spool and hardware. Compatibility: Traxxas TRX-4

Traxxas TRX-4 Right Front Axle Shaft **

Traxxas TRX-4 Right Front Axle Shaft **

$ 10.00

This is a replacement Traxxas TRX-4 Right Front Axle Shaft.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Receiver Box Seal Kit **

Traxxas TRX-4 Receiver Box Seal Kit **

$ 4.00

This is a replacement Traxxas TRX-4 Receiver Box Seal Kit, including a small tube of silicone grease.  Compatibility: TRAXXAS TRX-4

Traxxas TRX-4 Receiver Box **

Traxxas TRX-4 Receiver Box **

$ 12.00

This is a replacement Traxxas TRX-4 Receiver Box.  Compatibility: TRAXXAS TRX-4

Traxxas TRX-4 Output Drive **

Traxxas TRX-4 Output Drive **

$ 15.00

This is a replacement Traxxas TRX-4 Output Drive.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Offset Rod Ends (4) **

Traxxas TRX-4 Offset Rod Ends (4) **

$ 4.00

This is a pack of four replacement Traxxas TRX-4 Offset Rod Ends.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Machined Underdrive Ring & Pinion Gear (10/35T) **

Traxxas TRX-4 Machined Underdrive Ring & Pinion Gear (10/35T) **

$ 39.95 Save $ 5.05

The Traxxas TRX-4 Machined Underdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is underdriven compared to the stock gear ratio, meaning it will provide reduced wheelspeed. This gear is more durable than the stock parts and is better suited to high power ESC/Motor systems. Package includes one 35T ring gear and one 10T pinion gear. A popular tuning option is to overdrive the front axle, and underdrive...

Traxxas TRX-4 Left Rear Axle Shaft **

Traxxas TRX-4 Left Rear Axle Shaft **

$ 6.00

This is a replacement Traxxas TRX-4 Left Rear Axle Shaft.  Compatibility:  TRAXXAS TRX-4

Traxxas TRX-4 Left Front Axle Shaft **

Traxxas TRX-4 Left Front Axle Shaft **

$ 10.00

Traxxas TRX-4 Left Front Axle Shaft. Package includes one axle shaft and one cross pin. Compatibility: Traxxas TRX-4  

Traxxas TRX-4 GTS Shock Springs (0.61 Rate - Blue) (2) **

Traxxas TRX-4 GTS Shock Springs (0.61 Rate - Blue) (2) **

$ 6.00

Traxxas TRX-4 GTS Shock Springs allow you to fine tune the performance of your GTS shock equipped model. With a full range of spring rates available, there is one for every application. Package includes two.61 rate, blue shock springs.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Front Winch Bumper **

Traxxas TRX-4 Front Winch Bumper **

$ 8.00

This is a replacement Traxxas TRX-4 Front Winch Bumper.  Compatibility: Traxxas TRX-4

Traxxas TRX-4 Front T-Lock Cable **

Traxxas TRX-4 Front T-Lock Cable **

$ 12.00

This is a replacement Traxxas TRX-4 Front T-Lock Cable.  Compatibility: TRAXXAS TRX-4

Traxxas TRX-4 Front Portal Drive Input Gear **

Traxxas TRX-4 Front Portal Drive Input Gear **

$ 8.50

Traxxas TRX-4 Front Portal Drive Input Gear. Package includes replacement drive gear, cross pin and coupler barrel. Compatibility: Traxxas TRX-4