Features
- High-quality construction with ball bearings and hardened steel shaft
- Ideal for models requiring up to 925 watts of power
- Quiet, lightweight operation
- Slotted 14-pole outrunner design
- Equivalent to 40- to 46-size glow engine for planes weighing 4–7 lb (1.8–3.2 kg)
- External rotor design—6mm shaft can easily be reversed for alternative motor installations
- Ideal for 25- to 40-size 3D airplanes up to 5 lb (2.2 kg)
- Includes mount, prop adapters and mounting hardware
- High-torque, direct-drive alternative to inrunner brushless motors
Overview
Key Features
- Equivalent to 40- to 46-size glow engine for planes weighing 4–7 lb (1.8–3.2 kg)
- Ideal for 25- to 40-size 3D airplanes up to 5 lb (2.2 kg)
- Ideal for models requiring up to 925 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design—6mm shaft can easily be reversed for alternative motor installations
- Slotted 14-pole outrunner design
- High-quality construction with ball bearings and hardened steel shaft
- Quiet, lightweight operation
Needed To Complete
60A brushless ESC
4S–5S Li-Po or 12- to 16-cell Ni-MH/Ni-Cd
12x8 to 14x10 prop
Overview
The Power 46 is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 4 to 7 pounds (1.8–3.2 kg), 25- to 40-size 3D airplanes up to 5 pounds (2.2 kg), or models requiring up to 925 watts of power. It’s an especially good match for Hangar 9 .40-size trainers like the Alpha .40 (HAN2450), Arrow .40 (HAN2625) and warbirds like the T-34 Mentor 40 (HAN2425). Also a great match for sport planes like the Ultra Stick 40 (HAN1675 or HAN1690), Seagull Spacewalker 40 (SEA2050), and smaller sport 3D planes like the Twist 40 (HAN2650).
Detailed Information
 |
| Hardware is included with the purchase of this motor. |
|
|||||||||||||||||||||||||
| Flying Weight w/Battery: 5.4 lb |
| Amps | Volts | Watts | Input Watts/Pound | RPM |
| 47.4 | 14.1 | 670 | 124 | 8220 |
| Expect strong performance with very short takeoff rolls and a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management. |
| Option 3: |
| Motor: Power 46 |
| ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft cutoff and no brake) |
| Prop: APC 13x8E |
| Battery: Sanyo RC-3000HV 14-Cells (7-Cell packs x2 in series) |
| Flying Weight w/Battery: 6.7 lb |
| Amps | Volts | Watts | Input Watts/Pound | RPM |
| 44.0 | 13.4 | 590 | 89 | 7950 |
| Expect good performance with a good balance of thrust and top speed. Average duration is approximately 5 to 7 minutes depending on throttle management. |
Specifications
- Bushing Or Bearing
- Bearing
- Cells
- 12–16 Ni-MH/Ni-Cd or 4–5S Li-Po
- Connector Type
- 3.5mm Bullet
- Idle Current (Io)
- 3.90A @ 10V
- Motor Design
- Outrunner
- Motor Type
- Brushless
- Recommended Prop Range
- 12x8 to 14x10
- Resistance
- .04 ohms
- RPM/Volt (Kv)
- 670
- Shaft Diameter
- 6mm (.24 in)
- Voltage
- 14.4 to 19.2
- Wire Gauge
- 14 AWG