Up to 10-amp continuous current with proper air flow
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or Auto Select)
Auto motor shutdown if signal is lost or there is interference
Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Soft start
Overview
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2–3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.
This is a replacement E-Flite EC-1500 Twin 10x9" Scimitar 5 Blade Prop, intended for use with the E-Flite EC-1500 Twin. This package contains one prop.
Capable of maximum continuous discharge rates up to 30C
Equipped with balancing leads and a connector that are compatible with most balancers and balancing chargers
Equipped with JST connector on main power leads
Perfect battery for small indoor 3D, aerobatic, sport, or scale airplanes using Park 300 and Park 370 motors on 3S applications.
Overview
E-flite High-Power Series Lithium Polymer Batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there's a battery perfect for almost any application, from indoor slow flyer to large-scale sport and aerobatic airplane models as well as micro to mid-sized helicopter models.
This is a set of two E-Flite Propellers with included Spinners, and are intended for use with the E-Flite UMX 4-Site, Ultra Micro Sukhoi SU-26xp and Ultra Micro Pole Cat airplanes as well as the HobbyZone Champ.
Compatible with the BLH2400 Blade Nano CP S RTF, BLH2480 Blade Nano CP S BNF, BLH2900 mSR S RTF, BLH2980 mSR S BNF, BLH7200 Nano QX FPX and the BLH7280 Nano QX FPV BNF
This is an adapter charge lead for the battery that comes with the mCP X, EFLB2001S25. This battery comes with a larger connector than the standard 1-cell ultra micro Li-Po batteries. This adapter lead is used to adapt the larger high-current connector to the standard ultra micro connector which then allows the mCP X battery to be charged with chargers designed for the more common ultra micro batteries.
This is an E-flite 2S, 20C, 180mAh Li-Poly Battery Pack and is intended for use with the ParkZone UMX Sbach 342 and UM F-27Q Stryker 180. E-flite High-Power Lithium Polymer Batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there’s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
Specifications: Type: LiPo Capacity: 180mAh Voltage: 7.4V Wire Gauge: 26AWG Configuration: 2S Maximum Continuous Discharge: 20C Maximum Continuous Current: 3.6A
