Nitro



Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

$ 7.00

This is one Traxxas super duty long glow plug for engines that accept long shaft plugs (basically any engine except OS engines). This is a medium hot glow plug intended for use in Traxxas TRX2.5 & TRX3.3 race engines that come with the Traxxas T-Maxx and Traxxas Revo monster trucks. This is the standard plug recommended by Traxxas.  Compatibility: Traxxas Nitro Slash

Traxxas Universal Body Washers **

Traxxas Universal Body Washers **

$ 2.00

This is a pack of eight Traxxas Universal Body Washers.  Compatibility:  Traxxas 4-Tec Traxxas Bandit Traxxas E-Maxx Traxxas Jato Traxxas Nitro 4-Tec Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Stampede Traxxas Rally Traxxas Revo Traxxas Rustler Traxxas S-Maxx Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Slayer Traxxas Stampede Traxxas Stampede 4x4 Traxxas T-Maxx Traxxas Telluride 4x4

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

$ 7.99

This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug. Some things to keep in mind: The smaller the engine, the hotter the plug. The higher the...

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

$ 8.99

This is a pack of two ProTek R/C "High Temp" 1/8 Scale Silicone Exhaust Manifold Gaskets. These are the gaskets supplied with the Samurai 321B engine and tuned pipes. These high temp gaskets are perfect for nitro competition or heavy use.   The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time...

Dynamite Platinum Standard Glow Plug (#3 - Hot) **

Dynamite Platinum Standard Glow Plug (#3 - Hot) **

$ 5.09 Save $ 1.90

This is a replacement Dynamite #3 Platinum Series Standard Glow Plug. This glow plug is rated "Hot" and is ideal for buggies, truggies and monster trucks that require a standard glow plug.  Compatibility: Losi TEN-SCT Nitro

Losi Shock Rebuild Set (2) (Ten-T)

Losi Shock Rebuild Set (2) (Ten-T)

$ 7.99 Save $ 1.01

  This is a replacement Losi Shock Rebuild Set, and is intended for use with the Losi Ten-T truck. This rebuild set includes all the hardware needed to rebuild two shocks.  Compatibility: Losi 810 Losi TEN Rally X Losi TEN-SCBE Losi TEN-SCT Nitro Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-T

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines) **

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines) **

$ 6.99

The ProTek T3 Ultra Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T3 "Ultra Hot" heat range plug is recommended for .12 to .21 size engines running 10 - 36% nitro in colder climates. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot" plug recommended for .12...

Team Associated 1.00mm 4-Shoe Clutch Springs (4) **

Team Associated 1.00mm 4-Shoe Clutch Springs (4) **

$ 6.99

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. Compatibility: Team Associated RC8B3.1 Team Associated RC8T3.1

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long) **

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long) **

$ 3.59 Save $ 0.41

This is a set of two ProTek R/C Long Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Springs attach the tuned pipe manifold to the engine exhaust port. With the manifold springs wrapping around the engine, over time they tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the manifold springs weaken and become vulnerable to breaking which can lead to manifold gasket damage;...

Team Associated 4-Shoe Aluminum Clutch Shoes (2) (Hard) **

Team Associated 4-Shoe Aluminum Clutch Shoes (2) (Hard) **

$ 14.49 Save $ 0.50

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes.  Compatibility: Team Associated RC8B3.1 Team Associated RC8T3.1

Tekno RC Captured Shock Boot Set (2) (Long) **

Tekno RC Captured Shock Boot Set (2) (Long) **

$ 4.99

This is an optional Tekno RC Long Length Captured Shock Boot Set. These shock boots are only compatible with the optional Tekno RC Locking Spring Perches (TKR6140)! These shock boots feature a captured design that will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They allow the suspension to remain free and consistent without sacrificing up travel. They are a perfect length fit for their respective shock lengths and won’t be caught or...

Team Losi Racing Twist Lock Glow Igniter & Charger Combo **

Team Losi Racing Twist Lock Glow Igniter & Charger Combo **

$ 24.99 Save $ 3.00

This is the Team Losi Racing Twist Lock Glow Igniter & Charger Combo. This light and convenient igniter can be easily operated with one hand and is perfect to have on hand in the pits. This was tested by Adam Drake and Dakotah Phend and is their igniter of choice. Features:  Twist Lock connector offers easy one hand operation 3000mAh NiMH cell provides enough capacity for at least a whole day at the track Rubber shrink tube construction is durable...

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (12) **

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (12) **

$ 20.49 Save $ 1.90

This is a pack of twelve ProTek R/C "DustBuster 2" Mugen MBX7 Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it takes to burn through a tank...

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short) **

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short) **

$ 3.59

This is a set of three 0.63" or 5/8" ProTek R/C Short Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. These Exhaust Manifold Springs attach the tuned pipe to the tuned pipe manifold. These springs tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the springs weaken and can become loose which can lead to gasket damage or leaks. Specifications: Length: 0.63" (15.8mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

Ultimate Racing Pre-Oiled Dual Staged Foam Air Filter (Losi/Serpent) (12 PCS) **

Ultimate Racing Pre-Oiled Dual Staged Foam Air Filter (Losi/Serpent) (12 PCS) **

$ 21.00

This is the Ultimate Racing pre-oiled dual-stage foam air filter, and it's been specially designed for use with Losi 8ight / Serpent S811 Cobra air filters. The combination of this pre-oiled dual-stage foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces pre-oiled and safely stored in a double zipper bag, so can be stored for...

ProTek RC Nitro Pit Caddy Bag **

ProTek RC Nitro Pit Caddy Bag **

$ 46.99 Save $ 10.00

This is the ProTek R/C Pit Caddy. Preparation is one of the most important aspects of a successful 1/8 scale race program. To reach the top of the podium, you need to spend countless hours getting ready for battle. With all the time and effort invested, when its time to take the stand the last thing you want is to need an important item, only to find that it was left at your pit table. Keeping these critical items accessible...

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2) **

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2) **

$ 5.99

This is a set of two ProTek R/C Silicone Exhaust Manifold Gaskets, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time the gasket tends to lose it resiliency as it absorbs the intense heat and vibrations from the engine. As this...

ProTek RC "SureStart" Pencil Style Glow Igniter (AA Battery) **

ProTek RC "SureStart" Pencil Style Glow Igniter (AA Battery) **

$ 10.99

This is the ProTek R/C "SureStart" Pencil Style Glow Ignitor. The SureStart pencil ignitor is a high quality glow ignitor that uses a AA size alkaline or rechargeable battery. This ignitor is great for surface and aircraft applications, due to its compact size and 2.25" reach. The blue anodized aluminum handle is easy to spot in your pit bag, and when properly maintained will withstand years of use. 

ProTek RC "SureStart" Replacement Rubber Wheel **

ProTek RC "SureStart" Replacement Rubber Wheel **

$ 5.99

This is a replacement ProTek R/C "SureStart" Rubber Wheel, and is intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500).   Compatibility: Protek R/C PTK-4500

ProTek RC "Blue Flame" DC Nitro Engine Heater (Head Warmer) **

ProTek RC "Blue Flame" DC Nitro Engine Heater (Head Warmer) **

$ 53.99 Save $ 6.00

This is the ProTek R/C "Blue Flame" DC Nitro Engine Heater. The “Blue Flame” Engine Heater utilizes technology similar to that used by Formula 1, Indy Car and NASCAR racing teams to properly and safely pre-heat your nitro engine in 10 minutes to 140-160°F or 60-70°C. *Actual engine temperature and heating times may vary slightly based on power source and ambient temperature variances. The ProTek R/C “Blue Flame” Engine Heater will pre-heat the critical internal parts of your nitro engine resulting...

Novarossi Buggy Clutch Bell (14T)

Novarossi Buggy Clutch Bell (14T)

$ 27.99 Save $ 0.01

This is an optional Novarossi 14 Tooth Clutch Bell, intended for use with the Novarossi Clutch System (NVR71000). This package also includes two 5x10x4mm Novarossi bearings.

Team Losi Racing Pre-Built Aluminum 4 Shoe Clutch **

Team Losi Racing Pre-Built Aluminum 4 Shoe Clutch **

$ 54.99 Save $ 7.00

This is an optional Team Losi Racing Pre-Built Aluminum 4 Shoe Clutch, and is intended for use with the Losi 8IGHT family of vehicles. This pre-built clutch has been hard anodized for increased lifespan when compared to the original blue Losi clutch, and includes two aluminum shoes, two carbon shoes, as well as two black, two green, two gold and two silver clutch springs allowing you to tune the clutch for a variety of track conditions.  Compatibility: Losi 8IGHT Losi...

Novarossi C5TGN "Turbo" Off Road Glow Plug **DISCONTINUED

Novarossi C5TGN "Turbo" Off Road Glow Plug **DISCONTINUED

$ 9.79 Save $ 3.21

The Novarossi C5TGN "Turbo" Off Road Glow Plug was developed to take the guess work out of choosing your glow plug. This plug can be used in ANY weather condition! This plug helps to simplify engine tuning and create a more stable idle, and it doesn't matter if its hot or cold outside, rainy or dry. One plug to rule them all. 

Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing

Losi 8x14x4mm Flanged Rubber Sealed Ball Bearing

$ 19.99 Save $ 3.00

This is a pack of four 8x14x4 flanged rubber sealed ball bearings for the Losi 8IGHT racing buggy. These bearings are the internal bearings used in differential assemblies Compatibility: Losi 8IGHT Losi 8IGHT 2.0 Losi 8IGHT 3.0 Losi 8IGHT 4.0 Losi 8IGHT Nitro RTR Losi 8IGHT RTR Losi 8IGHT-E Losi 8IGHT-E 2.0 Losi 8IGHT-E 3.0 Losi 8IGHT-E 4.0 Losi 8IGHT-T Losi 8IGHT-T 2.0 Losi 8IGHT-T 3.0 Losi 8IGHT-T 4.0 Losi 8IGHT-T E 3.0 Losi 8IGHT-T Nitro RTR Losi 8IGHT-T RTR...

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines) **

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines) **

$ 6.99 Save $ 0.01

The ProTek T4 Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T4 "Hot" heat range plug is a good general purpose plug recommended for .12 to .21 size engines running 10 - 36% nitro in most climate conditions. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot"...

Ultimate Racing Starter Box **

Ultimate Racing Starter Box **

$ 85.00

This is the Ultimate Racing 1/8 off road starter box. The Ultimate Racing Starter Box is a lightweight and compact professional starter box that has been designed for 1/8 off road cars. Its adjustable pins allow this box to be compatible with most of 1/8 off road cars. The CNC-machined aluminum housing and top plate have a high-quality black coating for extra durability. This starter box has two powerful ventilated electric motors, making it one of the most powerful and...

Ultimate EFRA 2141 Off Road Super Strong Pipe Set w/ Fast Lock System Manifold **

Ultimate EFRA 2141 Off Road Super Strong Pipe Set w/ Fast Lock System Manifold **

$ 90.00

Ultimate Racing presents the FAST-LOCK system for connecting the exhaust pipe to the manifold without the pipe/manifold springs. This FAST-LOCK connecting system is stronger and safer than the traditional springs system, it ensures perfect pipe-manifold alignment and improves engine performance. Assembly and operation is very easy. The manifold is fixed to the pipe by turning a quarter turn. The manifold comes with an inner silicone O-ring and an outer silicone gasket that ensures a perfect sealing. We suggest to lubricate...

Team Associated RC8B3.1 4-Shoe Clutch Flywheel **

Team Associated RC8B3.1 4-Shoe Clutch Flywheel **

$ 22.49 Save $ 2.50

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel, with an included collet and four clutch shoe pins.  Compatibility: Team Associated RC8B3.1 Team Associated RC8T3.1

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium) **

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium) **

$ 3.59

This is a set of two ProTek R/C 1.25" Medium Length Exhaust Manifold Springs intended for use with 1/8 scale nitro engines with mounting tabs on the both sides of the engine case. These springs attach the tuned pipe manifold to the engine case using the spring tabs; if you're engine does not have spring tabs you will need the wrap around style long springs (PTK-7100). Specifications: Length: 1.25" (34mm) Thickness: 0.16" (4mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

ProTek RC "Quick Pit" Fuel Gun **

ProTek RC "Quick Pit" Fuel Gun **

$ 32.99 Save $ 5.00

This is the ProTek R/C "Quick Pit" Fuel Gun. Used by ProTek R/C team drivers Chad Bradley and Marty Korn at the 2010 IFMAR 1/8 Buggy World Championships, the ProTek R/C Quick Pit Fuel Gun is one of the fastest fuel guns available! The Quick Pit can refill an 1/8 buggy fuel tank in less than 1 second! The Quick Pit Fuel Gun features a graduated 150cc fuel reservoir, with easy to read volume marks that allow you to quickly...

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (6) **

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (6) **

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Mugen MBX7 Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it takes to burn through a tank...

Novarossi Buggy Clutch Bell (13T) **DISCONTINUED

Novarossi Buggy Clutch Bell (13T) **DISCONTINUED

$ 27.49 Save $ 0.51

This is an optional Novarossi 13 Tooth Clutch Bell, intended for use with the Novarossi Clutch System (NVR71000). This package also includes two 5x10x4mm Novarossi bearings. 

Dynamite Nitro Glow Plug Wrench **

Dynamite Nitro Glow Plug Wrench **

$ 7.99

This is the very popular Nitro Glow Wrench from Dynamite. Everyone should have one of these in their pit box!

JConcepts Associated B3.1 "S15" Body (Clear)

JConcepts Associated B3.1 "S15" Body (Clear)

$ 28.99 Save $ 5.01

The JConcepts Associated B3.1 "S15" Body blends performance features on the popular Silencer body with features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep rooted position allows the engine head maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the Team...

Traxxas .12 One Way Starter Engine Bearing **

Traxxas .12 One Way Starter Engine Bearing **

$ 15.00

This is a replacement one way starter bearing from Traxxas. This bearing goes onto the crankshaft at the rear of the motor. Compatibility: Traxxas Nitro Stampede

Ultimate Racing Glow Starter SC Size w/Meter (Red) **

Ultimate Racing Glow Starter SC Size w/Meter (Red) **

$ 23.00

This aluminium glow starter can be opened to remove the battery for replacement and comes with a battery condition meter, so you can see if the battery is ok. It is anodized in red. Battery 1800mha included

Team Associated 0.95mm 4-Shoe Clutch Springs (4)

Team Associated 0.95mm 4-Shoe Clutch Springs (4)

$ 6.99

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. Compatibility: Team Associated RC8B3.1 Team Associated RC8T3.1

Team Associated 4-Shoe Composite Clutch Shoes (2) (Hard)

Team Associated 4-Shoe Composite Clutch Shoes (2) (Hard)

$ 26.49 Save $ 3.50

This is a pack of two replacement Team Associated "Hard" 4-Shoe Composite Clutch Shoes. Compatibility: Team Associated RC8B3.1 Team Associated RC8T3.1