The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Don't let body post holes ruin that perfect body that you've painted up! Use these Invisible body mounts, secure one magnet on your body with either hot glue or doublesided tape. The mount has an adjustable angle so that you can mount it perfectly even on curved surfaces! Comes with set screw mounting for secure body mount placement on your body posts.
The MST CS-R Drift Tire is recommended for 4wd applications and is available in a variety of compounds to suit the surface you are running on. The tire features a rounded edge, with raised letters on the sidewall that give the tires a super scale look. This is a 26mm wide, +/- 7° camber tire that features a slightly rounded contact patch. This tire is recommended for use with MST wheels. Package includes four tires.
The MST GT Offset Changeable Wheel Set features an aggressive 5 spoke pattern and modeled in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips.
The Yeah Racing Dark Drifter 6-Slot LED Light Kit is an easy to use light kit that will bring your ride to life. The included controller features six inputs, four that are always on, and two that flash. The package also includes white, red, blue and yellow 5mm LED strings making this an all inclusive package. This system is a great for drifters and even crawlers as the flashing light ports and blue/yellow LEDs will allow you to configure the lights in a flashing KOH style setup.
Features:
Easy Installation
Flexible to switch connection to 7 different flashing modes and interchange of accessories
Maximum connection to 6 sets of LED lights (2 sets are flashing slots)
4 - solid on slots
2 - flashing slots
Input: 6V
Includes:
(1) Light Controller Box
(1) Blue LED Light Set (2 x 5mm Blue LED Bulb)
(1) Red LED Light Set (2 x 5mm Red LED Bulb)
(1) White LED Light set (2 x 5mm White LED Bulb)
(1) Yellow LED Light Set (2 x 5mm Yellow LED Bulb)
The MST CS-R Drift Tire is recommended for 4wd applications and is available in a variety of compounds to suit the surface you are running on. The tire features a rounded edge, with raised letters on the sidewall that give the tires a super scale look. This is a 26mm wide, +/- 7° camber tire that features a slightly rounded contact patch. This tire is recommended for use with MST wheels. Package includes four tires.
This is a pack of ten 5x10x4mm metal shielded "Speed" 1/8 clutch bearings. ProTek R/C "Speed" bearings are high quality steel/chrome bearings designed for the R/C racing enthusiast.
These 5x10x4mm metal shielded bearings are the standard bearing for the 1/8th scale nitro clutches. Please check the manual that came with your vehicle for the correct size if you are not certain.
These are also used as wheel bearings in the Kyosho Lazer ZX-5 1/10th scale 4WD electric buggy.
This is a pack of four Yokomo DRA Competition Drift Tires for use on Carpet surfaces. This is a solid type competition resin drift tire DRC. It is the optimum compound for carpet surface and features an updated design of tire thickness, tread shape and sidewall shape.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
MST S-GD 21 Offset Changeable Wheel Set. These wheels feature a 12 spoke pattern and molded in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips.
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available the DS Racing LF-3 Compound making them great for P-Tile, Painted Floor and Epoxy surfaces. Package includes four tires and four foam inserts.
MST 501 Offset Changeable Wheel Set. These wheels feature a classic webbed pattern and molded in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips.
The MST GT Offset Changeable Wheel Set features an aggressive 5 spoke pattern and modeled in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips.
The MST Drift Car Body Post Set is compatible with all MST drift cars. Package includes two long posts, two short posts, two long post caps, two short post caps, hardware and body clips.
These Yeah Racing RMX 2.0 Titanium Tie Rods are a set of titanium tie rods for the MST's RMX2.0, helping to save some weight without sacrificing the durability. Comes with a long turnbuckle for you to install the servo parallel to the chassis as well.
This is a Sideways RC Scale Drift SSA3LW Single Pipe Exhaust Tip, a detailed scale option part to add realism to any 1/10 drift exhaust. This part has been cut from metal and is a universal fit to all 1/10 scale bodies. This pack includes one scale single pipe exhaust tip that has been heat treated to add a high level of detail to any scale application.
Note:Modification to your model may be required when installing these parts.
This is a Sideways RC Scale Drift SSS3LW Single Pipe Exhaust Tip, a detailed scale option part to add realism to any 1/10 drift exhaust. This part has been cut from metal and is a universal fit to all 1/10 scale bodies. This pack includes one exhaust tip that has been heat treated to add a high level of detail to any scale application.
Note: Modification to your model may be required when installing these parts.
The MST GT Offset Changeable Wheel Set features an aggressive 5 spoke pattern and modeled in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips.
The Yeah Racing Ultra Bright LED Light Kit is a great light kit for any application. These lights feature four white 5mm LEDs, and two red 5mm LEDs, all wired into a single female JST connector. The lights run at a maximum of 6.0V, so they can be powered directly from your receiver, or from a 4 or 5 cell nickel battery.
Package includes light string and two adapters. One adapter features a JR style plug that plugs into the receiver, a male JST that plugs into the light string, and a female JST plug that can be plugged directly into a separate battery. The other adapter features a female JR into a male JST so you can bypass the receiver and power the lights directly from a battery pack. Plus, the package includes
The MST CS-R 2WD Drift Tire is recommended for 2wd applications and is available in a variety of compounds to suit the surface you are running on. The tire features a rounded edge, with raised letters on the sidewall that give the tires a super scale look. This is a 26mm wide, +/- 7° camber tire that features a slightly rounded contact patch. This tire is recommended for use with MST wheels. Package includes two tires.
This is a pack of four Yokomo DRA Competition Drift Tires for use on Asphalt surfaces. This is a solid type competition resin drift tire DRA. It is the optimum compound for asphalt road surface and features an updated design of tire thickness, tread shape and sidewall shape.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
This is a 2oz. bottle of MST #5 of Mineral Oil, a specific mineral damper oil intended to provide good lubricity and durability to the kits shocks. The 59ml bottles come in various weights; choose the right weight depending on your application.
The MyTrickRC Attack After-Burner Backfire Drift Light Kit offers tons of value for a low price.
The AB-1402 Drift Car Kit is a Deluxe Lighting System and uses the SQ-1 Controller to it's maximum potential. Well tested, and highly acclaimed by those in the Drift Community, the AB-1402 Drift Car Kit offers Dual Headlights, Tail/Brake, Reverse, and Dual Backfire. With the AB-1402 Drift Car Kit you also get auto-Hazard Lights!
The AB-1402 Drift Car Kit uses the SQ-1 Lighting Controller and is super simple to install. With just one cable to the Receiver, you get all the great functions and features of the SQ-1 Controller! Everything you need to install is included in the kit.
Includes:
(2) 5mm Dual White Headlight LEDs
(2) 5mm Dual RED Tail/Brake LEDs
(1) 5mm Dual AMBER Running Light LEDs
(1) 3mm Dual ORANGE Backfire LEDs
(1) SQ-1 Lighting Controller
Quick Disconnect Power Cable (easy to remove body)
This is a set of Sideways RC Version 2 Universal Side Mirrors, detailed scale option parts to add realism to any 1/10 drift kit exterior. These plastic parts have been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. These scale side mirrors are handmade with the coloring infused directly into the product and include reflective decals.
Note:Modification to your model may be required when installing these parts.
Features:
All parts are handmade.
Adds scale details.
Cast molded out of quality polyurethane.
Specifications:
Length:33mm
Width:22mm
Height:8mm
Includes:
(2) 1/10 Scale Drift Version 2 Universal Side Mirror
This is a 2oz. bottle of MST #5 of Mineral Oil, a specific mineral damper oil intended to provide good lubricity and durability to the kits shocks. The 59ml bottles come in various weights; choose the right weight depending on your application.
The Xerun D10 motors are elegantly designed for drifting, offering the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple.
- Factory soldered high quality 3.5mm banana plugs for easy motor swaps.
- Stator is optimized for drift, improving motor efficiency.
- Built-in, high-precision sensor board, combined with drift-specific fan rotors, providing excellent drivability.
- Lighweight. Weighs approximately 158g (including 3 gold insert weights)
- Special-shaped gold fan on the rotor cools the motor while making a pleasant sound, especially when Turbo is turned on.
The Sideways RC Scale Drift Wing is the ultimate accessory for your Sideways Wing Mount. This plastic part has been open cast molded from polyurethane to provide an affordable and durable upgrade. Plus, you can run the wing as is, or add one of two different side plate options to change the aesthetics. Package includes one wing, as well as one set of large side plates and one set of small side plates.
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE:These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes.
This is a pack of ten 3x3mm "High Strength" Cup Style Set Screws from ProTek R/C. These are made from metric grade 12.9 steel which has a minimum tensile strength of 174,000 PSI. These screws are the strongest you can get and are suitable for the most demanding applications! Most manufacturer brand screws are not grade 12.9 steel, so these are a great upgrade for your car, truck or helicopter!
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 6 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
The 1UP Racing 3x8x3mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors).
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs).
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately)
Specifications
ID
Xerun XD10 PRO ESC - DRIFT
p/n
30112614 (Stealth) |30112615 (Passion)
30112616 (Spirit)
Application
1/10th drift car
Cont./Peak Current
100A/800A
Input Voltage
2S LiPo/4-6S NiMH
BEC Output
5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
Wires & Connectors
Standard: 13AWG 200mm
Programming device
LCD program box OTA programmer (Available through Firmware update)
Firmware
LCD Program box via USB software (PC only) OTA (iOS / Android)
Size & Weight
40.7x35.0x32.0mm (w/Fan)
Weight
95g (w/ wires)
Motor Limit*
Brushless Motor Limit with 2S LiPo/6S NiMH: KV Rating/T Count ≥8.5T
Onisiki Aluminum 30mm Fan Booster. This optional fan booster is designed to guide air flow on 30mm Onisiki fans (ONI8204). Made from aluminum, this fan booster features the Onisiki styled engravings to add cool factor. Package includes one fan booster, one mount and hardware.
The Brood Air Velocity Stack 30mm Fan Shroud helps to funnel more air into your ESC or motor fan. This machined aluminum 2-piece velocity stack features a lower base, and screw on upper stack design that creates a venturi effect to flow more air, and help reduce operating temps. Package includes one velocity stack and mounting hardware.
Drift Like a King - Yokomo YD-2Z kit with YG-302 Gyro
The Yokomo YD-2Z 1/10 2WD RWD Drift Car Kit is equipped with a "3-split" transmission case that allows multiple motor position options and provides easy access to the transmission. An integrated bulkhead is used around the front to improve the left-right balance of the steering and improve operability. The upper deck is compatible with slide racks as standard, and steering characteristics suitable for various situations can be obtained with minimal changes.
The gear case has been greatly improved by dividing it into three parts. Since you can access the differential simply by removing the cap on the rear side, you can access the differential quicker and spend more time driving. Additionally, the motor position can be adjusted in 13 stages by rotating the motor mount from low to high mount positions, making it easy to tune the center of gravity to the road surface. The 3 gear transmission provides outstanding throttle response, and combined with the rear traction produced by the main chassis, it offers a greater level of control to create an incredible driving experience.
NOTE: Wheels, tires, and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
Features:
Integrated bulkhead and redesigned upper deck can be installed as a slide rack as standard in the kit
13 steps of motor position selection around the top shaft
3-gear transmission case is a 3-split type for easy differential access
The Yokomo PANDEM GR Supra Drift Body Set faithfully replicates the aggressive silhouette of a modified GR Supra. By taking the incredibly refined GR Supra platform, and adding the PANDEM aero body kit, this body is a testament to Yokomo's desire to stay on the cutting edge of the drift market. Yokomo's original molding technology faithfully molds the PANDEM aero kit with the front grille, rear underskirt, and deep side constrictions in one single piece - making it easy to add a custom wide body look to your drift build. The attractive lines of the beautifully curved Supra, combined with the accurate addition of the PANDEM body kit gives this body a realistic finish that you wouldn't expect from a RC car body.
NOTE:Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors).
Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs).
Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately)
Specifications
ID
Xerun XD10 PRO ESC - DRIFT
p/n
30112614 (Stealth) |30112615 (Passion)
30112616 (Spirit)
Application
1/10th drift car
Cont./Peak Current
100A/800A
Input Voltage
2S LiPo/4-6S NiMH
BEC Output
5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
Wires & Connectors
Standard: 13AWG 200mm
Programming device
LCD program box OTA programmer (Available through Firmware update)
Firmware
LCD Program box via USB software (PC only) OTA (iOS / Android)
Size & Weight
40.7x35.0x32.0mm (w/Fan)
Weight
95g (w/ wires)
Motor Limit*
Brushless Motor Limit with 2S LiPo/6S NiMH: KV Rating/T Count ≥8.5T
This is a Sideways RC Scale Drift DSA2 Double Pipe Dual Exhaust Tip, a detailed scale option part to add realism to any 1/10 drift exhaust. This part has been cut from stainless steel and is a universal fit to all 1/10 scale bodies. This pack includes one scale dual pipe exhaust tip that has been heat treated to add a high level of detail to any scale application.
Note:Modification to your model may be required when installing these parts.
Features:
Dual pipe.
Burnt tip for realism.
Angled edge.
All parts are handmade.
Stainless steel parts.
Fits 1/10 scale bodies.
Specifications:
Length:50mm
Width:20mm
Height:30mm
Pipe Outer:10mm
Pipe Inner:8mm
Includes:
(1) 1/10 Scale Drift DSA2 Double Pipe Dual Exhaust Tip
This is a Sideways RC Scale Drift Version 3 Side Pipe Intercooler, a detailed scale option part to add realism to any 1/10 drift kit. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. This scale intercooler is handmade with the coloring infused directly into the product. This pack includes one scale small intercooler with black cables installed on the side and a silver finish that adds a high level of detail to any scale application.
Note:Modification to your model may be required when installing these parts.
Ball Stud (M size) of SPM (Super Precision Machine Cut) titanium series. The lightweight / high rigidity titanium has applied for high precision machine cut process to produce Φ4.3mm Ball Stud (M size) which suits for very popular YD-2 series and other cars.
The movement of the joint is smoothed by high-precision ball processing, and a significant increase in exercise performance can be expected due to its light weight. The beautiful appearance is perfect for looking up the machine. Please try it! * The dimensions are as shown in the above image. Please check the dimensions of each part before purchasing.
This is a Sideways RC Red Bolt On Tow Sling, an ideal scale option part to add realism to any 1/10 drift kit. This fabric tow sling is handmade with the colors infused directly into the product in multiple pigment options. This pack includes hardware for mounting and adds a high level of detail to any drift application.
Note: Modification to your model may be required when installing these parts.
This is the Sideways RC Full Exhaust System, a detailed scale option part to add realism to any 1/10 drift kit exhaust. This plastic part has been open cast molded out of quality polyurethane instead instead of 3D printed, keeping the cost down and quality up. The full exhaust is handmade with the colors infused directly into the product in multiple pigment options and a realistic paint scheme applied to replicate heated metal. This pack includes one molded plastic full exhaust system and adds a high level of detail to any drift application.
Note:Modification to your model may be required when installing these parts.
MST RMX/RRX 2.0 Aluminum Rear Gearbox Set. This optional gearbox is great for adding tuning and style to your MST RMX 2.0 or RRX 2.0 Made from CNC-machined aluminum, this gearbox will hold your transmission gears with great precision. Package includes one gearbox housing, one unassembled ball differential, one motor mount, one main shaft, two steel center pins, two idler gears, eight bearings and hardware.
When used with the RRX 2.0, the internal transmission gears can be oriented to a 4-gear setting. When used with the RMX 2.0, the internal transmission gears can be oriented to a 4-gear setting. The included motor features three different motor placements allowing for changes to the center of gravity. The included ball differential uses aluminum outdrives for a long lasting finish.
Features:
Perfect fit in the MST RMX 2.0 or the RRX 2.0
Made from CNC-Machined aluminum
Anodized for a clean finish
Can be used in 4-gear or 3-gear setup
Three different motor mounting positions for changes to center of gravity
The MST CS-R Drift Tire is recommended for 4wd applications and is available in a variety of compounds to suit the surface you are running on. The tire features a rounded edge, with raised letters on the sidewall that give the tires a super scale look. This is a 26mm wide, +/- 7° camber tire that features a slightly rounded contact patch. This tire is recommended for use with MST wheels. Package includes four tires.
The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 6 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
The MST RMX Rear Shaft Ball Differential Set is an upgrade for the RMX 2.0 S, as well as the RMX-D kits equipped with the optional 4WD conversion (MXS-210452). Package includes precision machined outdrives, and the rest of the parts to build one complete ball diff with 40/13T gearing.
This is a pair of Sideways RC Style 14 Custom Wing Mounts, detailed scale option parts to add realism to any 1/10 drift kit. These parts are hand made, machined out of metal, anodized black for added strength and adjustable to fit any 1/10 scale body. This pack includes two black machined metal mounts and hardware for installation.
Note: Modification to your model may be required when installing these parts. Wing shown in photos is for illustrative purposes only and is not included.
This Yokomo M7 Advan Max Orido Racing 86 1/10 Drift Car Body Set is a clear polycarbonate body that is ready for you to get a custom paint scheme. Package includes one body with window mask and decals.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
cut from metal and is a universal fit to all 1/10 scale bodies. This pack includes one exhaust tip that has been heat treated to add a high level of detail to any scale application.
Note: Modification to your model may be required when installing these parts.
This is a pack of ten 3x15mm "High Strength" Flat Head Screws from ProTek R/C. These are made from metric grade 12.9 steel which has a minimum tensile strength of 174,000 PSI. These screws are the strongest you can get and are suitable for the most demanding applications! Most manufacturer brand screws are not grade 12.9 steel, so these are a great upgrade for your car, truck or helicopter!
The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 5 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
The DS Racing Drift Element 5 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.
Assembly NOTE:
The inner and outer rivet rings need to be glued together prior to final assembly.
To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware.
Features:
Custom 5 spoke look
Adjustable offset allows you to alter the fit and finish to your liking
Multiple color options and styles are available to best match your build
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Reve D UL12 Drift Wheels are a lightweight and high traction wheel for your RC Drift car! Each wheel weighs in at 11g, while providing the proper strength and stiffness. The design of the wheel is very unique, and provides high traction thanks to the hex hub locations, and overall wheel dimensions. The large diameter and thin rim for the inner portion of the wheel prevents contact with the ball ends and suspension arms, while adding higher traction under bumpy conditions.
There are four different colors to choose from, and all are 6mm in offset. Sold in pairs of two.
The optional Reve D ASL (Aluminum Super Light) Front Knuckles for the Yokomo YD-2 provide high performance, and excellent aesthetics. The design features as minimal amount of material as possible, while still providing improved strength over the original parts.
Upper arm mounting positions feature two different holes, to help reduce the complexity of settings. These knuckles accept both 10x5x4mm bearings, and with optional 1mm spacers (sold separately), the ability to use 10x5x3 bearings to help reduce the scrub radius.