This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this updated version brings the next level of performance to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the ultimate drift experience. Designed to be easy to drive for beginners but still rewarding for the experienced drifter, MST has included an updated chassis. This improved chassis offers increased traction and control along with a plethora of adjustments to fine tune your driving experience. Whether you are an experienced drifter or just getting started, the RMX 2.5 RTR gives you the performance you are looking for with looks to match! This RMX 2.5 RTR includes the 86RB pre-painted body.
MST RMX 2.5 RTR RC RWD DRIFT CAR Ready to run
NOTE:
- With MST's commitment to quality they test drive each vehicle to ensure proper operation. In some cases there may be slight marks on the tires and this is considered normal.
- Wheels shown in photos may not depict the wheels included with the vehicle. MST includes a random set of wheels.
Features:
- Updated chassis adds improved rear traction and control
- Two servo install options – vertical or lateral
- Updated spur gear allows the gearbox to be converted from RMX to RRX configurations
- Adjustable high angle steering system with adjustable Ackermann changes
- 6 degree KPI steering upright, and -0.5 towing distance axle design
- Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height adjustment and two side positions
- Updated HT "Short" rear lower arm
- The fulcrum at the rear suspension upper rod features a 5-step adjustment on both sides and the outer fulcrum is 4-step adjustable on both sides
- Two motor mounting options – High or Low center of gravity
- Oil filled high performance shocks
- Full ball bearings throughout
- Steel CVD axle transmission system
- Realistic caliper and disc shape brake set
- Battery mount accommodates both standard and "shorty" style battery packs
- Hobbywing XBL 2500Kv brushless motor
- Hobbywing XBL50 brushless ESC
- MST SC-0352 high speed steering servo
- MGX Steering Gyro
- Realistic drift wheel and tire package
Specifications:
Size: 1/10 Drift Car
Wheelbase: 257mm
Width: 190mm
Hex to Hex Width: F178mm / R171mm
Drive mode: RWD
Caster: Adjustable 6 / 8 / 10 / 12 degree
Bearing: Full ball bearing transmission system
Damper: Hydraulic damper set
Includes:
- RMX 2.5 RTR Drift Car
- XTR-03 2.4GHz Radio System
- XBL 2500Kv Brushless Motor
- XBL50 Brushless ESC
- MST SC-0352 Servo
- Steering Gyro
- Realistic Street Tires
Needed To Complete:
- (1) 2S LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector
- (1) Compatible Battery Charger
- (4) "AA" Batteries (for transmitter)
