The Scale By Chris Jack Stand is a 3D printed miniaturized replica that adds that functions as good as it looks. These jack stands feature a 35x35mm footprint at the base and a nice large cradle to hold the axle securely. The stand can be adjusted from 44mm to 75mm in height using a simple body clip retainer system, and work well with both 1.9 and 2.2 size rigs.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
Compatibility:
- Axial RR10 Bomber
- Axial SCX10
- Axial SCX10 II
- Axial Wraith
- GMade Komodo
- GMade Sawback
- RC4WD Gelande II
- RC4WD Trail Finder 2
- Vaterra Ascender