Pro-Line Pro-Bond CA Tire Glue (0.7oz) **
- $ 11.96
- Save $ 2.99
This is Pro-Line's Tire Glue. Pro-Line knows tires and understands that the strongest bond possible between the Tire and Wheel is a critical aspect of performance and tire longevity.The first challenge was developing the strongest glue possible while also having the correct flow characteristics and dry time that RC Racers and Bashers desire. Pro-Line’s new Tire Glue has a Hold Strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest Strength of any Tire Glue available. Pro-Line’s unique glue formula also provides the fastest drying glue possible while drying crystal clear with no yellowing or whitening found when gluing tires with other glues.
The Pro-Line Tire Glue features a super soft and squeezable Round Bottle that improves feel as you apply the glue, with the added benefit of the round bottle being significantly more stable on your pit table when compared to the elliptical shape found in all other glue bottles. The single biggest advancement of the Tire Glue system is the all-new Translucent Yellow P-L Applicator tips. The tips are specifically intended around Pro-Line’s Exclusive Round Bottle Design and snap into place for a secure fit while gluing. The P-L Applicator tips are Re-Usable unlike the throw-away tubes and have the perfect size applicator hole for gluing tires. Pro-Line includes 2 P-L Applicator tips with each bottle of P-L Glue for maximum value.
Don’t waste time or money on inferior glue – Choose Pro-Line Tire Glue for all your tire gluing needs!
- Custom Glue Formula Specifically Designed for Maximum Bond with Tires
- Super-Fast and Crystal Clear Drying
- Maximum Strength Bond – 3,200 PSI Holding Strength
- Unique Super Soft Round Bottle for Optimum Feel and Stability
- Re-Usable Snap Fit Yellow Pro-Bond Applicator Tips
- Pro-Line Tire Glue (1pc = 0.7 oz. / 20 g)
Tamiya PS-1 Lexan Spray Paint (3oz) **
This is a 3oz can of polycarbonate spray paint from Tamiya. These spray paints were developed especially for decorating transparent polycarbonate (Lexan) bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing a model. Small detail work should be brush painted beforehand using Tamiya bottle paints for polycarbonate. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. These paints are impervious...
MyLaps RC4 Transponder (3-wire) **
The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.
