Pro-Line Pro-Spec Rear 1/10 Buggy Shock Kit

Pro-Line Pro-Spec Rear 1/10 Buggy Shock Kit


Regular price $ 56.99 Sale price$ 49.99 Save $ 7.00
Shipping calculated at checkout.

  • Low stock - 1 item left
  • Inventory on the way

This is the Pro-Line Pro-Spec Rear 1/10 Buggy Shock Kit. The next generation of Pro-Line Shock Technology has arrived! Every last detail has been refined to give you the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal. The Pistons and Shaft Guides are made from Silky Smooth White Delrin for Low Stiction and the 3.5mm thick Shock Shaft is Hard Chrome Coated, just like full scale racing shocks.

The Pro-Spec Shocks feature an easy access Bleeder Cap Screw for consistent shock builds every time. Each pair of Pro-Spec Shocks includes 3 different piston options (1.4, 1.6 & 1.8) and a blank piston for drilling to a custom size. Custom Shock Tightening Tools and optional shock limiters are also included. Pro-Line’s Pro-Spec Shocks come in kit form with build instructions, so you can build the shocks exactly how you want. Your current 12mm big bore buggy springs bolt right up so you can get exactly the spring rate you are used to. Upper and lower shock pivot balls are included so you can fit a wider range of vehicles right out of the box. Optional +2, +4 and +6mm spring perches are included to fit a wide variety of buggies and shock springs.


Pro-Line Pro-Spec 1:10 Buggy Shocks


*Buggy Springs Not Included* - Use any 12mm Big Bore Buggy Spring


  • Smoothest Shocks Pro-Line has ever made
  • 12mm Big Bore Technology
  • Single Low Friction X-Ring Seal
  • Silky Smooth White Delrin Shaft Guides and Pistons
  • Easy Access Bleeder Cap Screw
  • Hard Chrome Coated 3.5mm Shock Shaft
  • Optional Pistons and Limiters Included
  • Use any 12mm Big Bore Buggy Springs

Rear Specifications:
Stroke: 27mm
Extended Length: 91mm (Length Measured Eyelet center to center)
Collapsed Length: 64mm
Weight: 18.0g


  • Stroke, Extended and Collapsed Lengths are adjustable with the included Limiters
  • Buggy Springs Not Included - Use any 12mm Big Bore Buggy Spring


  • PRO6267-04 1:10 Buggy Pro-Spec Rear Shock Shaft Set
  • PRO6267-05 1:10 Buggy Pro-Spec Rear Shock Body Set
  • PRO6267-06 Pro-Spec Shock Optional Spring Retainer Pack
  • PRO6308-02 Pro-Spec Delrin Piston & Guide Tree
  • PRO6308-03 Pro-Spec Plastic Tree
  • PRO6308-04 Pro-Spec Shock O-Rings
  • PRO6308-05 Pro-Spec Shock Hardware
  • PRO6308-06 Pro-Spec Shock Cartridges

Note About Fit:

  • Kyosho ZX-6 - Limit the front shock droop 1mm and Unscrew rear eyelet 1 turn for stock length
  • TLR 22 2.0 - Use stock 22 2.0 shock balls in the Front Shocks and Unscrew Front and Rear eyelet 3 turns for stock length
  • TLR 22-4 - Use PRO6267-01 in the Front with PRO6308-01 shocks in the Rear with 2mm of limiters to get stock rear shock lengths and use stock 22-4 shock balls in the Rear Shocks
  • Yokomo B-Max 2 - Unscrew rear shock eyelets 2 turns to get stock rear length
  • Hot Bodies D413 - Use PRO6267-01 in the Front with 5mm of limiters and use PRO6308-01 or PRO6308-31 in the Rear. Use 2mm spacers on the top of the shocks to get the correct shock angle.


          Note: This list may not be 100% accurate or up to date, and is meant to be used as a guideline for compatibility.

          Recently viewed