Losi Ride Height Gauge **
- $ 12.99
- Save $ 2.00
Losi's Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles. The rugged construction ensures the gauge will not fail or break easily, while clear markings make the gauge easy to read and use.
Key Features:
- Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles
- Rugged construction ensures the gauge will not fail or break easily
- Clear markings make the gauge easy to read and use
Compatibility:
- Losi 22SCT
- Losi 22T
- Losi 22T 2.0
- Losi 5IVE-T 2.0
- Losi 8IGHT 3.0
- Losi 8IGHT 4.0
- Losi 8IGHT-E 4.0
- Losi 8IGHT-T 4.0
- Losi TEN-SCTE 2.0
- Losi TEN-SCTE 3.0
- Losi TEN-T
Tamiya PS-1 Lexan Spray Paint (3oz) **
This is a 3oz can of polycarbonate spray paint from Tamiya. These spray paints were developed especially for decorating transparent polycarbonate (Lexan) bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing a model. Small detail work should be brush painted beforehand using Tamiya bottle paints for polycarbonate. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. These paints are impervious...
Pro-Line Pro-Bond CA Tire Glue (0.7oz) **
This is Pro-Line's Tire Glue. Pro-Line knows tires and understands that the strongest bond possible between the Tire and Wheel is a critical aspect of performance and tire longevity.The first challenge was developing the strongest glue possible while also having the correct flow characteristics and dry time that RC Racers and Bashers desire. Pro-Line’s new Tire Glue has a Hold Strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest Strength of any Tire...
MyLaps RC4 Transponder (3-wire) **
The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.