Gens Ace Redline 2.0 LiHV Battery
Gens Ace has built a strong reputation in the RC community for consistent, dependable power. The Redline 2.0 series carries that tradition forward with factory-matched cells, low internal resistance for stable voltage throughout your run, and a lightweight low-profile form factor suited for competitive builds.
Features:
- Stable automated stacking technology
- Rigorous single-cell matching across capacity, voltage, resistance, and discharge curve
- High capacity and discharge rating in a compact, lightweight package
Includes:
- (1) Gens Ace Redline 2.0 2S Shorty LiHV Battery 140C (7.6V / 4400mAh) with 5mm Bullet connectors
Specifications:
|
|
| Nominal Voltage |
7.6V (2S) |
| Capacity |
4400mAh |
| Max Charge Rate |
1C (5.3A) |
| Continuous Discharge |
140C |
| Cell Configuration |
2S1P |
| Watt Hours |
33.44Wh |
| Battery Connector |
5mm Bullet |
| Balance Connector |
2mm Bullet |
| Dimensions (L×W×H) |
3.77 × 1.85 × 0.708 in (96 × 47 × 18mm) |
| Weight |
5.75oz (163.1g) |
⚠️ LiPo Safety — Please Read Before Use
- Never leave a battery inside your vehicle during charging
- Never leave lithium batteries unattended while charging
- Always balance charge your lithium battery
- Always charge inside a LiPo-safe bag or fire-resistant container
- Use only a LiPo-compatible charger — NiMH/NiCD chargers are not compatible
- Never over-discharge your battery pack
Additional Guidelines: Avoid discharging beyond 80% of total capacity to maintain healthy cycle life. For the first 5 cycles, limit discharge to 50% on a freshly charged pack. Set a low-voltage cutoff on your ESC — end voltage should not drop below 3.2V per cell. Do not expose batteries to direct sunlight or store/charge in temperatures above 35°C. If a battery becomes warm after fast charging or heavy use, allow it to cool completely (approximately 20 minutes) before inspecting or recharging.
