This is a pack of three pieces of Du-Bro 1/4" Heat Shrink Tubing. The ideal solution for many of your modeling needs. This tubing has been specifically formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighter. Ideal for insulating electrical splices and also covering electrical plugs and connectors.
The ideal solution for many of your modeling needs. This tubing has been specifically formulated to shrink up to one half its origianl diameter simply by using a heat gun, soldering iron, or cigarette lighter. Ideal for insulating electrical splices and also covering electrical plugs and connectors.
The Glo Caddy conveniently stores your Glo-Plug Ignitor on your Field Box (using supplied mounting bracket) or the Glo Caddy can be removed and worn on a Belt or Pocket. The Glo-Caddy accomodates Sub C and most C size glo-plug ignitors. Keep your Glo-Plug Ignitor where it should be, at a finger-tips-reach!
*Note: The Glo Caddy does not fit the E/Z Glo Ignitor/Tester and some other larger models of ignitors.
This new design is by far the best way to mount servos, cowls, landing gear, etc. The large head of the screw acts as a washer and they also have a socket head for easy, no slip installation. Bright Zinc plated with clear chromate.
Dubro washers are available in both flat and split styles. Use the flat washers for spacers or to keep your screw head from pulling through soft materials. The split washers help keep a screw from backing out due to vibration.
.030 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp!
Du-Bro Tailwheels look great and have a machined one piece aluminum hub. They are molded solid for unmatched durability and strength and are preferred by professional pilots worldwide. 1/pkg.
These also have many more applications in school projects and various crafts.
175T takes a 1/8 Axle (3mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.
This 4 piece set fits perfectly in servo arm hole, bellcranks, nylon horns, and throttle arms. Set includes (1) ball threaded for 0-80 (1/16 diameter thread), (1) self threading nylon socket, (1) threaded coupler 3/4 long with 3/8 2-56 thread for up to .072 wire.
They not only look good, they are fully functional. Attached to your guy wires (flying wires), they add a working touch of class. Nickel plated steel with 1/16" (1.5 mm) eye & 4-40 thread.
The outside hex head will fit your glo-plug/prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, non-slip way to secure or loosen wing bolts.
High quality machined brass shaft collars that are great for wire landing gear and axle shafts. Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench. (Wrench not included with #243 & 244) Allen Wrench Sizes:
The outside hex head will fit your glo-plug/prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no-slip way to secure or loosen wing bolts.
This is a DuBro 20 Ounce Fuel Tank. This tank comes complete with a stopper and fuel tubing for gas. DuBro fuel tanks will not split or crack from vibration or pressure and are designed to be tough.
12 oz tank measurements: 2 1/4 H x 2 9/16 W x 5 3/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glow fuel or gasoline if you purchase our catalog #DUB400 Gasoline Conversion Stopper.
Du-Bro fuel tanks were designed with toughness in mind! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Du-Bro fuel tanks come complete with all of the hardware including our one piece clunk with fuel barbs built right on the clunk stem, your fuel tubing will not slide off! Du-Bro fuel tanks can be used with either glofuel or gasoline if you purchase our Cat. No. 400 Gasoline Conversion Stopper. Next time you build a model, choose a Du-Bro fuel tank.
Du-Bro fuel tanks were designed with toughness in mind! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Du-Bro fuel tanks come complete with all of the hardware including our one piece clunk with fuel barbs built right on the clunk stem, your fuel tubing will not slide off! Du-Bro fuel tanks can be used with either glow fuel or gasoline if you purchase our Cat. No. 400 Gasoline Conversion Stopper. Next time you build a model, choose a Du-Bro fuel tank.
Du-Bro Standard and Large Clunks are now available separately. Our Clunks weigh 7.5 grams / 0.26 oz. (Standard), 13.6 grams / 0.48 oz. (Large) and are Nickel Plated to prevent corrosion. Fuel Line Barbs are machined right in Clunk to grip your fuel lines securely. 1/pkg.
2 oz Tank Measurements: 1 5/16 H x 1 13/16 W x 2 3/4 Long Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glow fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
Protect those wing tips and tails! Easily installed by using CA or epoxy with holes provided for screw mounting. Available in three sizes for use on small to large aircraft. Weight: 1.8 grams/each.
Our Micro Lite Wheels are available in 3 sizes:1-1/2"" (38mm), 2"" (51mm) and 2-1/2"" (64mm). They feature a one piecedesign, with polished spokes and flat black wheel (no O-Rings to comeoff rim). Comes complete with 2 sets of wheel retainers, a wide axlehub for a true running wheel. Perfect for indoor and park flyers. 1pair/pkg.
Du-Bro's permanent mount blind nuts are available in 7 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.
Complete assembly for any control linkage. Allows easy removal for on-the-field adjustments. Features 12" long .072 diameter rod with 3/4 2-56 thread one end and our 2-56 Spring Steel Kwik Link.
The Safety Lock Kwik-Link offers everything a modeler could want in a clevis and more. Simply put, it's ingenious, a grandslam! Super strong, super tough. More strength then you'll ever need. 10% lighter than steel clevis'. Size stamped on safety lock for positive identification.
Features
Safety Lock is mounted in trac system on clevis to help prevent losing it.
Square shank for easy installation & adjustment.
Self tapping - leaving no slop on threads.
Brass plated steel safety lock slides into groove on pin for a secure and solid lock.
Brass plated stepped steel pin - no binding on control horns or servo arms.
The Safety Lock Kwik-Link offers everything a modeler could want in a clevis and more. Simply put, it's ingenious, a grandslam! Super strong, super tough. More strength then you'll ever need. 10% lighter than steel clevis'. Size stamped on safety lock for positive identification.
Features
Self tapping - leaving no slop on threads
Safety Lock is mounted in trac system on clevis to help prevent losing it.
Brass plated stepped steel pin - no binding on control horns or servo arms
Square shank for easy installation & adjustment.
Brass plated steel safety lock slides into groove on pin for a secure and solid lock.
Solder Kwik-Links are nickel plated making a strong, attractive and easy to solder connector for servo or horn. 2-56 Solder Kwik-Link designed for use with .072 diameter wire, link guards included.
Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia wire, link guards included.
Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia wire, link guards included.
5-piece ball link set, excellent for off-set steering, throttle and servo hook-ups. Ball is threaded for 2-56 nut. Threaded coupler 3/4" with 3/8" 2-56 thread, for up to .072 wire. Self-threading nylon socket, washer and 2-56 nut.
4 oz tank measurements: 1 1/2 H x 2 1/16 W x 3 3/4 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glow fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
Dubro has been one of the top suppliers of model airplane hardware and accessories for decades. Now RC racing fans can enjoy the benefit of Dubro quality and precision with their line-up of car and truck accessories.
This is a set of Dubro heavy-duty ball links for use with 4-40 threaded rods.
Features:
Black nylon link construction
Brass swivel-ball construction
Beveled brass swivel-ball stand-off
Hex-Head machine mounting screw
Includes: Twelve each of heavy-duty ball links with brass swivel-balls, beveled brass swivel-ball stand-offs, 4-40 x 5/8 socket head cap screws, #4 lock nuts (metal construction w/nylon insert) and metal spacers
Requires: 3/32 allen wrench and 1/4 open-end wrench or nut driver
Specs: Ball Link Length: 27mm (1.063) Standoff Height: 3.2mm (0.125)