Connectors/Adapters

Overview

Key Features

• This adapter adapts a battery with an IC5 connector to a device with an IC3 connector

Compatibility:

• Arrma Infraction 6S BLX
• Arrma Infraction V3 3S BLX
• Arrma Limitless
• Arrma Vendetta 3S BLX
• Arrma Vorteks 3S BLX
• E-flite Focke-Wulf Fw 190A 1.5m
• E-flite Viper 90mm
• Losi Super Baja Rey 2.0

5mm Male Bullets Low Profile (pr.) Gold 19mm

Product Specifications

Compatibility:

• Losi 8IGHT-X/E 2.0

Dynamite EC5 Battery Connectors (2) DYNC0022

This is a set of six Castle Creations 6.5mm Bullet Connectors.  The package contains 3 male and 3 female connectors. 

If you want something done right, you usually have to do it yourself. Castle Creations was never totally satisfied with the options for bullet connectors for high power applications, so they designed and manufactured their own. Castle Creations Bullets make a perfect connection, every time. Simple as that. Available in a lovely shade of gold and made in three sizes: 4mm, 5.5mm, and 6.5mm. 

This a XT60 Female to EC5 Male charging adapter with 12AWG wire.   This can be used on the HOTA D6 and D6 Pro and other chargers that use a XT60 male connector like the iCharger X6. Connector may also be SC5 (Compatible with EC5).

SMC XT60 to SC5 Male

Product Specifications

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your batteries with Traxxas connectors, and to your charger with 4mm banana plugs. 12" of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup.

This is a Dynamite EC5 Device Charge Lead. This charge lead features two 4mm banana style bullets fixed to 10awg wire.

This is a heavy duty 2S hard case lithium polymer battery charge/balance adapter lead from ProTek R/C. This 13" long charge lead allows you to plug a 2S battery with 5mm female bullet connectors directly to your charger, eliminating the need for a balance board!

This adapter lead features 4mm banana plugs on the charger end, and 5mm banana plugs on the battery end, connected with 14awg wire. The balance wires include a 2mm banana plug on the battery end, with a 7-pin XH plug connected with 22awg wire for balancing that is plugged directly into the 6S balance port in the charger. This charge lead is specifically designed to connect a ProTek R/C 2S LiPo hard pack with 5mm connectors to ProTek R/C chargers, but will also work with any charger that uses 4mm bullet connectors for output, and has a 7-pin (6S) XH balance port.

Manufacturer Description

2S-6S XH Balance Board

Ultra Power single-channel chargers include one balance board, whereas multi-channel chargers include two. Consumers that utilize three or four output ports will require additional boards if they're charging lithium packs.

This is a pack of two pairs of T-style ultra plugs from ProTek R/C. There are total of two female and two male connectors in the package, along with one piece of heat shrink tubing.

These connectors are designed to easily handle in excess of 50A of continuous current.

This is a ProTek R/C Balance Charge Lead with a 2S Balance Harness to 4mm Banana Plugs with 4S Balance Adapter. This incredibly handy charge lead was developed to provide users with the option of balance charging smaller 2S receiver batteries directly through the balance connector. This eliminates the need to remove the pack from your model, or charge through a switch!

Simply plug the banana plugs into your charger, plug the balance connector into a 4S balance socket, and plug the receiver pack into the female 2S XH plug, and you can charge your receiver packs in the field more conveniently that ever before! Simple, useful, and only from ProTek R/C.

NOTE: We do not recommend that you use this charge lead as the sole method of charging your receiver packs. This was developed as a way to simplify charging your batteries in the field. We recommend that you remove the battery from the model at the end of each day and inspect for damage.

Product Specifications

This is the ProTek R/C Heavy Duty T-Style Charge Lead, featuring a T-style ultra plug on one end connected to 4mm banana plugs with high quality 14awg silicone wire.

This charge lead can be used for heavy duty charging due to the 14awg wire, and can be used to charge at rates more than 20 amps. In total length, the lead measures 8.5 inches (21.6cm) long from end to end.

Manufacturer Description

These are the 4mm High Current Bullet Connectors from Castle Creations.

FEATURES: 
Gold plated
Fits wire diameter up to 4mm
Use 16 gauge to 13 gauge wires
Up to 75A current

INCLUDES: 
Three sets of bullet connectors

REQUIRES: 
Solder and soldering iron - HCAR0776 and STAR2000

SPECS: 
Length: .66" (17mm)
Diameter: .15" (4mm) inside (where the wire is soldered to)
Diameter: .19" (5mm) outside

BOX DIMENSIONS: 3.00" W. X .25" H. X 3.00" L.
BOX WEIGHT: .03 LBS.

Key Features

• This adapter adapts a battery with an IC3 connector to a device with an IC5 connector

Compatibility:

• E-flite Habu SS

This is a set of ProTek R/C "TruCurrent" XT60 device and battery connectors. This set contains two female and two male connectors. ProTek R/C "TruCurrent" XT60 Connectors have 3.5mm pins and are made from high-temp Nylon and gold plated spring connectors inserted in the injection mold at the time the connector is formed. ProTek R/C "TruCurrent" XT60 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for high current applications.

Features

• Low resistance for high current capacity
  
• Ergonomically designed and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's high power applications
• Designed with convenience and reliability in mind

This is a pack of two ProTek R/C 5mm to 4mm Bullet Reducers. These reducers are an absolute must for racers looking to use batteries with a 5mm bullet hole, while continuing to use 4mm bullets on their ESC, and 4mm bullets on their charge leads.

Simply plug these reducers in the 5mm bullet hole in your 5mm battery, and now you have a 4mm bullet hole! All your prior 4mm bullets now fit that 5mm battery bullet hole.  

Why cut wires and solder connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a Tamiya connector to an ESC equipped with a Deans plug.

This is a Spektrum IC3 Device to JST Device with a female IC3 plug to a female JST connector. 

This a XT60 Female to T-Style Male charging adapter with 12AWG wire.   This can be used on the HOTA D6 and D6 Pro and other chargers that use a XT60 male connector like the iCharger X6.

SMC XT60 to T-Style Male

This is the JST Female Conn with Lead (2) by Dynamite

Key Features

Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only. 

Compatibility:

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit

This is a set of ProTek R/C "TruCurrent" XT60 device and battery connectors. This set contains four  female connectors. ProTek R/C "TruCurrent" XT60 Connectors have 3.5mm pins and are made from high-temp Nylon and gold plated spring connectors, both included in the injection mold at the time the connector is formed. ProTek R/C "TruCurrent" XT60 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for high current applications.

Features

• Low resistance for high current capacity
• Ergonomically designed and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's high power applications
• Designed with convenience and reliability in mind

Features

• Low resistance for high current capacity 
  
• Ergonomically designed and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's high power applications
• Designed with convenience and reliability in mind

This is a Spektrum IC3 Device to JST PH2.0 Device, including a female IC3 plug to a female JST PH2.0 connector.

Compatibility:

• Axial SCX24

Specs

OVERVIEW:

This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.

The IC5 connector provides a reliable, efficient connection between the ESC and battery.

FEATURES:

Supplied assembled and ready to use

INCLUDES:

1 x IC5 Loop Connector

Compatibility:

• Arrma Felony 6S BLX
• Arrma Fireteam 6S BLX
• Arrma Infraction 6S BLX
• Arrma Infraction V2 6S BLX
• Arrma Kraton 4S BLX
• Arrma Kraton 6S BLX
• Arrma Limitless
• Arrma Mojave 6S BLX
• Arrma Notorious 6S BLX
• Arrma Outcast 4S BLX
• Arrma Outcast 6S BLX
• Arrma Talion 6S BLX
• Arrma Typhon 6S BLX

This is the ProTek R/C Electronic Switch. The ProTek R/C Electronic Switch is a lightweight and compact MCU controlled digital ON/OFF switch for your radio controlled model. With the push of a button this digital electronic switch eliminates the problems with intermittent contact associated with mechanical switches. This ProTek R/C Electronic Switch can be easily mounted to the transponder mount of your model or any other suitable location using double-sided tape (optional bottom covers are included).

The ProTek R/C Electronic Switch includes a LiPo mode that when selected, will auto-detect low LiPo voltage and will cut-off power from your LiPo battery to prevent over discharging. LiPo mode can be turned off if other safeguards are in place or you are using a NiMH or NiCd battery. The ProTek R/C Electronic Switch also monitors the remaining capacity and condition of the battery pack, and indicates the status with the use of LED's.

Features:

• Digitally MCU Controlled Unit
• Supports Multiple Battery Types
• Integrated LiPo Safety Mode 
• LED Battery Status Indication
• Small and Lightweight Design 
• Additional Bottom Cases Included 

SMC EC3 to Traxxas Charge Adapter

ic3 to traxxas

traxxas to ic3

ic3

Charge Adapter: Banana to XT60 Male (DYNC0143)

This is a set of ProTek R/C "TruCurrent" XT90 device and battery connectors. This set contains two female and two male connectors. ProTek R/C "TruCurrent" XT90 Connectors have 4.5mm pins and are made from high-temp Nylon and gold plated spring connectors inserted in the injection mold at the time the connector is formed. ProTek R/C "TruCurrent" XT90 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for high current applications.

Features

• Low resistance for high current capacity
  
• Ergonomically designed and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's high power applications
• Designed with convenience and reliability in mind

This is the IC3 Battery to EC2 Device Charge Lead Adapter by Spektrum

Compatibility:

• Losi Mini-B

Key Features

KEY FEATURES