No reviews
- Low stock - 1 item left
Note: This list may not be 100% accurate or up to date, and is meant to be used as a guideline for compatibility.
This is an optional Team Associated Factory Team RC8B3 Dogbone Set, intended for use with RC8B3, RC8B3e, RC8B3.1, RC8B3.1e, RC8B3.2, and RC8B3.2e vehicles in the center/front location, and will also fit the RC8T3 series in the center/front location as well (there is no rear dogbone set for the RC8T3).
Dogbones will increase the efficiency and life of your center drive line over universals because of the simplified drive system with only one drive pin instead of two vs. a universal joint.
Note: During installation that the shorter length 3x12mm pin goes into the center diff while the larger 3x14mm pin goes into the front or rear outdrive.
Compatibility:
- Team Associated RC8B3
- Team Associated RC8B3.1
- Team Associated RC8B3.1e
- Team Associated RC8B3.2
- Team Associated RC8B3.2e
- Team Associated RC8B3e
Note: This list may not be 100% accurate or up to date, and is meant to be used as a guideline for compatibility.
