Savox SC-1258TG Standard Digital "High Speed" Titanium Gear Servo **
- $ 63.99
- Save $ 26.00
Features:
- Light weight
- Coreless Motor provides high speed, incredible efficiency, and low power consumption
- Super strong titanium gears
- The Aluminum Case design not only looks good but also allows for lower operating temperatures.
- Totally Green – from materials to production, these servos are environmentally friendly.
- Ideal for CCPM on 600 and 700 class heli, steering servo on 1/10 scale Buggies.
*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.
Specifications:
- Speed @ 6.0V: 0.08 sec/60°
- Torque @ 6.0V: 166 oz-in / 12 kg-cm
- Weight: 52.4g
- Bearing: Dual
- Type: Standard
- Gear: Titanium and Aluminum
- Case: Aluminum Heatsink
- Output Shaft: 25T Spline (Futaba)
- Case Size (LxWxH): 40.3x20x37.2mm
MyLaps RC4 Transponder (3-wire) **
The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.
True Spec DV 7.4V 8000mAh 110Amps/75C wired hardcase
True Spec DV 7.4V-6500mAh-120 Amps/90C pack. - Built with wide tab cells for lowest possible internal resistance. - 10AWG wires soldered straight to the tabs. Pack Specs Milliamp Hour 8000mAh Voltage 7.4V C Rate 110 Amps / 75C Configuration 2S2P Hard Case Dimensions Length 138.93mm / 5.47in Width 46.74mm / 1.84in Height 24.89mm / 0.98in Weight 351gr / 12.38oz
Hobbywing Xerun XR8 SCT 1/8 Sensored Brushless ESC **
Full-Sensored Mode Supported The Hobbywing XR8 SCT is the first 1/8 scale competition ESC which can work the full-sensored mode at all times when paired with a Hobbywing matching motor. Perfect for 1/10 4WD Short Course Truck, Monster Trucks and of course 1/8th scale, the XR8 SCT ESC boasts full sensored operation, 140A output, electronic switch, 6V/7.4V switchable BEC and wireless programming capabilities. In-Depth Features: Turbo Timing Technology: Turbo timing technology is implemented by the XR8 SCT to unleash the...