Power Hobby Heat Sink with Twin Turbo High Speed Cooling Fans (Assorted Colors)
PHBPH1289BLACKRegular price Sale price $ 22.99
Heat Sink features a lightweight aluminum construction with a dual cooling fan design. The heat sink is compatible with 1/8 scale motors around 40.8mm diameter and 57.9mm in length and includes two 30x30x10mm high-speed fans that peak around 18,000RPM @6v
The fans can be installed directly to the heatsink or you can use the included 10mm spacers between the fans and the heatsink for enhanced airflow.
Fits 1/8 motors with 40.8mm diameter and 57.9mm length
Lightweight aluminum construction
Dual fan design
Includes two 30x30x10mm cooling fans
(1) Heat Sink - Big
(1) Heat Sink - Small
(4) M3 x 6mm Round Head Screws
(4) M3 x 14mm Round Head Screws
(4) M3 x 25mm Round Head Screws
(4) 10mm Washers
(2) 30x30x10mm Turbo High Speed Fan
Powerhobby Aluminum Motor Heatsink Cooling Fan 1/10 540 / 550 Size Motor (Assorted Colors)
PHBPHF10FANBLUERegular price $ 11.99
Heat is the enemy, especially when it comes to electric motors. Keep your temperatures in check and your motor running efficient and cool with our Motor Heatsink with Twin Cooling Fan. The motor heatsink clips right onto your 540 or 550-sized motor, and features an anodized coating and multiple heatsink fins for added cooling surface area. The cooling fan is powered through a standard 2-pin Rx plug.
NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5.0V and no more than 6.0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6.0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5.0V and no higher than 6.0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.
Includes : One Cooling Fan
PowerHobby Aluminum Cooling Fan 1/8: (Assorted Colors)
PHB18FSBLACKRegular price $ 14.99
Power Hobby 1/10 Aluminum Heatsink Mount 30mm Twin Turbo Cooling Fans 28K Black
PHBPH1297BKRegular price $ 26.99
Twin motor cooling fans with motor mount fits 1/10 scale motor with a diameter of 36-38mm and power connector can plug directly into any open channel of the receiver or BEC, it can reduce the temperature of the motor quickly and get the motor as cool as possible. Pushing your 1/10 scale car to the limit!
Includes JST-Y Splitter with servo connecter. The total wire length is 15 inches.
Powerhobby 30mm Tornado Booster High Speed Aluminum RC Cooling Fan
PHBPHF3033REDRegular price $ 17.95
Full aluminum case, increasing the air flow being directed into the fan! When mounted on a fan mount or esc, the large surface area of the aluminum will act as a giant heatsink as well!
1 fan with Hradware