Powerhobby 30mm Tornado Booster High-Speed HV Aluminum Cooling Fan – Blue (PHF3033-Blue)
Keep your motor, ESC, or custom electronics running cooler with the Powerhobby 30mm Tornado Booster Cooling Fan — a high-speed aluminum cooling fan engineered for serious thermal management across a wide range of RC scale applications. Spinning up to 28,000 RPM at 8.5V, the Tornado Booster moves serious airflow in a compact 30x30x10mm package that fits virtually anywhere cooling is needed from 1/12 through 1/5 scale. The full T6 aluminum heatsink-style housing does double duty — directing and concentrating airflow into the fan blades while providing additional surface area for passive heat dissipation and protecting the blades from debris and accidental contact. The 5V–8.5V operating range and JST connector make installation clean and straightforward in most RC electronics layouts.
Features:
- High-speed 30mm RC cooling fan — up to 28,000 RPM at 8.5V
- Full T6 aluminum heatsink-style housing for airflow concentration, heat dissipation, and blade protection
- Compact 30x30x10mm dimensions for versatile installation across scale sizes
- Wide 5V–8.5V operating voltage range
- 0.45A current draw
- 180mm wire length with JST power connector
- Blue anodized finish
- Mounting hardware included
- Suitable for motor, ESC, and custom electronics cooling applications
- Compatible with 1/12 through 1/5 scale RC vehicles
Specifications:
| Specification |
Detail |
| SKU |
PHF3033-Blue |
| Fan Dimensions |
30 x 30 x 10mm (1.18 x 1.18 x 0.39") |
| Maximum Speed |
28,000 RPM at 8.5V |
| Operating Voltage |
5V–8.5V |
| Current Draw |
0.45A |
| Wire Length |
180mm |
| Connector |
JST |
| Housing Material |
T6 Aluminum |
| Weight |
13g |
| Color |
Blue |
In the Box:
| Qty |
Item |
| 1 |
Powerhobby 30mm Tornado Booster High-Speed Aluminum Cooling Fan (Blue) |
| — |
Mounting Hardware |
Voltage Note: Do not exceed 8.5V. While this fan is sometimes listed as 2S HV LiPo compatible, a fully charged 2S HV battery can exceed the 8.5V operating limit. Use a regulated BEC or voltage reducer when powering from a 2S HV source.
Installation Note: Confirm blade clearance before securing. Keep fan and wiring away from gears, driveshafts, motor shafts, and all moving components. Verify mounting hole spacing, available clearance, and power source voltage and current capacity before installation.
