JConcepts "Aero" S-Type 7" Rear Wing (2)
JCO0181
Regular price $ 14.00 Sale price $ 11.99 Save $ 2.01/
Shipping calculated at checkout.
Aero S-Type 7" Rear Wing, (2pcs)
Developed for World Championship event, 7" width
Innovative design, durable material
Industry first, forward gurney option
Clipped rear corners minimize breakage
Large openings for tire clearance and expansion
Pro-level height and rake angle
1/10th off-road wizardry
The next generation of rear wings is here, developed and manufactured by JConcepts Inc. The 7" wide S-type wing includes options not seen before on a 1/10th off-road rear wing. An extended rear gurney lip makes tuning much easier for more grip on loose surfaces. The base of the wing design is built on the popular Aero wing, but with additions that make the wing more durable, more adjustable, and ultimately a great tuning piece.
The S-type wing is a direct bolt-on for most 1/10th scale 2wd and 4wd off-road buggies. The wing features a long chord construction with reinforced ribbing in the vertical plane below the over-hanging gurney. Cut-lines and dimpled locations are positioned throughout for trim and tuning options. The 7" variant of the S-Type wing was used in competition during the 2019 IFMAR Worlds in Trencin, Slovakia for increased rear traction.
Features:
JConcepts "Finnisher" Off Road Car Stand (Matte Black)-
JCO2370M
Regular price $ 20.00 Sale price $ 15.99 Save $ 4.01/
Shipping calculated at checkout.
This is the JConcepts "Finnisher" Off Road Car Stand. For 2015, JConcepts unveiled the latest car stand specifically for the prestigious Reedy Race of Champions. The design team focused on several aspects to debut a treat during the large event. First, size was a focus and a lower stance was built into the design to accommodate 1/10th vehicles. The hex shaped design was inspired by the JConcepts accessory line-up, and side pockets were added as catch-all compartments for body clips, wheel nuts or any small item that is routinely changed during a race event. Cushion pads are positioned at the hex tips to provide support all the way to the edges on any platform vehicle while the large center pads prevent normal slippage.
As a bonus, JConcepts has included a rubber plug option with the company’s logo branded into the surface. To install, simply cut, moto-sand or ream on the pre-defined line in the center area and remove to expose a large hole. Plug in the rubber piece as a grommet type installation and the look of the stand becomes even more custom. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape “Striker” theme.
Features:
- Original, JConcepts Finnisher design
- Durable material, matte black finish
- Large and small foam cushion pads
- JC logo plugs for custom look
- “Striker” themed decal wrap
JConcepts "HF2 SCT" Low-Profile Short Course Truck Body (Clear)
JCO0282
Regular price $ 43.00 Sale price $ 39.49 Save $ 3.51/
Shipping calculated at checkout.
JConcepts' "HF2 SCT" Low-Profile Short Course Truck Body was designed for mid-motor SCT trucks with elements that take SCT tuning to the next level. With more reliable stability, increased speeds and more cornering ability in the SCT class, JConcepts has slammed the roof on the HF2 giving racers the ability to push the limit even more than before. Effectively lowering the CG on an SCT truck is a huge advantage and once combined with optional light-weight materials, drivers can feel more confidence inspiring performance "straight outta the package."
Air escape details continue to be all the rage in SCT racing and the HF2 body continues the tradition of successful bodies with increased options. Full rear opening capability just behind the cab releases in the most crucial of areas. Larger and more open louvers near the tail end of the bed lend a helping hand while the front fender flares and lower windshield area maintain the tune-ability with trim lines for user preference.
The wheel wells are an area of focus on the HF2 body with an edgier appeal and pronounced flare to them. The openings allow for more tire clearance throughout suspension travel and also provide a little release of air during high-speed cornering. The rear number plates have been updated to accommodate the lower roof line and also detailed for appearance. Name plates remain a favorite item on JConcepts bodies and have also be lowered, angled and notched to fit into the rear bed configuration. Metric hardware and light-weight locknuts are included to mount all body included add-ons. As a bonus, the body includes an HF decal sheet for compatibility as well as window mask and customer letter to fill the accessory package.
NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.
Features:
- JConcepts original HF2 styling
- Slammed roof, low-profile stance
- Revised, enlarged air escape passage detail
- Protruding fender flares with increased clearance
- High angle, detailed number and name plates
- Available in standard and light-weight material
- Includes Hi-Flow decal sheet, hardware and window mask
Compatibility:
- Losi 22SCT 2.0
- Team Associated RC10 SC5M
JConcepts "Satellite" Tire Glue Bands Assorted Colors
JCO22122
Regular price $ 16.00 Sale price $ 13.99 Save $ 2.01/
Shipping calculated at checkout.
This is a pack of four blue JConcepts "Satellite" Tire Glue Bands. JConcepts has reinvented the tire mounting rubber band. A uniquely molded design, specifically developed for tire mounting, the rubber band is produced in a high-elasticity material capable of stretching to a full assortment of different sized tires. Finely detailed array of handles are designed to ergonomically conform to your fingers so the user can deftly adjust the rubber band to the sidewall of each tire to apply the pressure where it is needed.
Features:
Features:
- Unique JConcepts shape and function
- High-elasticity material
- Finely detailed array of handles
- Designed for finger tip control
- Available in blue and black colors
- 4 pieces included per package
- Fits – 1/10th, SCT and 1/8th buggy
JConcepts "The Machine" 1968 Pontiac Firebird Pro 1/10 Drag Racing Clear Body
JCO0455~
Regular price $ 60.00 Sale price $ 51.00 Save $ 9.00/
Shipping calculated at checkout.
Features
- Officially licensed by GM to JConcepts
- Body measures 11.00" in width and 13" wheelbase
- Fits a variety of platforms including DR10, Losi 22S, and Drag Slash
- Scale inspired body, cab, and window design
- 1:1 headlight and grill treatment
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed Pontiac Firebird / JConcepts decal sheet
- Drag Slash requires additional Traxxas parts
Overview
JConcepts begins to stretch its legs in the Drag Racing scene with the introduction of the new Pontiac Firebird. The new 1968 styled body dubbed, “The Machine” has been an immediate hit on and off the race track and prototyped and driven by JConcepts drivers across the United States. The new body shell protrudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter and crowned shaped hood line.
The Firebird has a long silhouette allowing an even displacement of downforce over the front and rear end helping the body gain grip where needed. When a driver makes initial throttle response, the over-hang in the rear and built-in rear side-dams help the vehicle gain forward traction and launch stability. Getting up to speed with “The Machine” is possible with the low-slung roof-line which handles the at-speed handling. The large lay-down front windshield cuts through the wind like a fighter jet while the recessed side-windows provide just enough visibility for a Pro Mod.
The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the “big end” of the race track. With just enough clearance to fit over most front suspension components, “The Machine” hangs tough in performance and aesthetics. A slight hood-scoop runs the center-line of the body over the crowned hood which makes perfect space for painting decoration or sponsor decals.
The recessed front-end looks complete by adding included headlight, grille and duct decals to highlight a branded area of the body. Drop below the grille to the built-in splitter, trim to the lowest cutline to cut through the air with accuracy. Small wheel wells close up large gaps around the tires and an ultra-low cutline on the rocker panel area allows the body to have a low drape effect. The final feature, the long roof-line extended to the trunk section blends into a built-in gurney type wing for downforce even without adding additional wings or aerodynamics.
The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep and detailed Pontiac Firebird / JConcepts decal sheet. The product is always backed by JConcepts customer service, supported, and developed by professionals with style and authenticity.
Specifications
- Material
- Polycarbonate
- Product Width
- 11" (279 mm)
- Scale
- 1/10
- Vehicle Type
- Drag Car
- Wheelbase
- 13" (330 mm)
JConcepts 1/10 1966 Chevy II Nova Clear Body
JCO0398
Regular price $ 60.00 Sale price $ 51.00 Save $ 9.00/
Shipping calculated at checkout.
JConcepts makes the iconic 1966 Chevy Nova II as a 1-piece body shell, new for 2020.
This 1966 Chevy II Nova shows off an extensive sharp-edged restyle based in part on the Super Nova concept vehicle. In general, proportions are squared up and features including a bold grille and semi-fastback roofline highlight the shape. "Humped" fenders in an angular rear-end were reminiscent of other Chevrolets from the era of style.
To bring the Street Eliminator product to market, JConcepts worked together with Chevrolet to incorporate the heritage while also including options to bring out the street racer appeal. The main shell is comprised of a newly created 1-piece design so drivers can more easily fit and finish the beauty of yesteryear. The front-end closure shows off the single headlight style with deep recessed sections along the grille and front bumper to faithfully replicate the original.
The rear closure section includes bumper detail, trunk works and vertical taillight cues. In addition, the design team added a sectional rear wing to the project to bring the drag racing inspiration to life. The two-piece rear wing is trunk mounted with a lower support and upper wing with high-speed stabilizing ribs for added performance. Included in each body set, a 1966 Chevy Nova II decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. As always, each body set is backed with JConcepts customer support and racing heritage.
Specifications –
The Chevy II Nova measures a 12.75" wheelbase and the inside dimensions of the body are 10.75" wide front and 11" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body.
Features:
• 1966 Chevy II Nova faithful representation
• Two-piece rear wing for street elimination competition
• Fits an assortment of SCT length trucks with width modifications
• Decal sheet with Chevy, Nova, Super Street and JConcepts badges.
• Officially licensed by Chevrolet to JConcepts.
JConcepts 1/10 1967 Chevy Chevelle SCT Clear Body^
JCO0358
Regular price $ 60.00 Sale price $ 51.00 Save $ 9.00/
Shipping calculated at checkout.
Key Features
- 1967 Chevy Chevelle faithful representation
- Two-piece rear wing for street elimination competition
- Fits an assortment of SCT length trucks with width modifications
- Decal sheet with Chevy, Chevelle and JConcepts badges.
- Officially licensed by Chevrolet to JConcepts.
Overview
One of the crown jewels of the muscle car generation is the 1967 Chevrolet Chevelle. It was a potent street weapon and a notable day-to-day automobile, but its strength, is one of the most classic models to ever roll-off the General Motors assembly line. As the brochure claimed in the late 60’s, "What you'll see will probably bring on a severe compulsion to go driving.”
As the street eliminator class heats up on the circuit, JConcepts has faithfully recreated the icon in full detail. Like all vehicles of this generation, the imagination was amazing in the design department, swooping lines, hard edges and statement making trim packages. The corners of the front-end are pointed and wedge down to point the driver in the correct direction. The hood-scoop is planted along the center-line of the vehicle bringing that drag-strip inspiration.
The roof and coverage of the Chevelle is large and in charge, plenty of head-room for the scale drivers and accessories fans can deliver. At every turn, the Chevy pinches off a piece of nostalgia right back to the trunk lid and hidden rear window treatment. One of the staples of the 1967 is the long rear deck lid and large wraparound taillamps with standard backup light mock-ups.
A complete sit-down conversation was needed in the creation of the specialty decal sheet. The mass amount of coverage, angular fitment with proper badges along with a host of license plate tag-lines made the process a success. Each body also includes the rear wing option to finalize the street eliminator look. The lower rear wing support is mounted carefully to the trunk using double sided tape or shoe goo (not included). The upper wing section sets down and provides the look and finishing touch to the 1967 classic.
Specifications
The 1967 Chevy Chevelle body measures a 13" wheelbase and the inside dimensions of the body are 10.75" wide front and 11" rear. The body is built for a 2WD SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body.
JConcepts 1/10 Offroad Tire Stick (Black) (4)
JCO2430-2
Regular price $ 15.00 Sale price $ 11.99 Save $ 3.01/
Shipping calculated at checkout.
Tire organization is key and especially in 1/10th off-road when wear and tire prep methods must be closely monitored at all times. JConcepts introduces the new tire sticks which allow a driver to neatly group sets of front and rear tires together. With availability in blue or black colors, the tire sticks can make an eye popping appearance in the pits or tucked away nicely in storage or racing bags. The tire sticks operate with 2 separate pieces that are designed to interlock and work together to snap and clinch into place.
To use, simply slide the mounted tires down the stick portion and position them so the last tire has the hex facing outward. Slide the clinching retainer down the stick and align the hex into place in the wheel and pull snuggly together. As a bonus, extra stick length can be manually trimmed off for a more compact fit or finish to any clinched set of tires.
Features:
- Original JConcepts design
- Easy, 2-piece snap and clinch function
- Available in blue and black colors
- Embossed JConcepts logos for authenticity
JConcepts 1/10 Scale Adhesive Foam Body Washers (12)
JCO2704
Regular price $ 6.00 Sale price $ 5.10 Save $ 0.90/
Shipping calculated at checkout.
This is a pack of twelve JConcepts Adhesive Foam Body Washers, for use with 1/10 scale body mounts and shells. Prolonging the life of any RC body shell is important. The JConcepts foam washers start protecting where initial damage starts to occur which is right around the body mount holes or attachment area. The die-cut foam donut is adhesive backed to attach itself to the body and the foam cushions the landings from there. The soft but high-impact material allows some flexibility between the body and the setting distance to the mount protecting the paint from the inside out.
Features:
- Soft, high-impact foam material
- Die-cut size for fit and finish on 1/10th body mounts
- Adhesive backed for easy application
JConcepts 1/10th 2.2" Buggy Tire Inner Sidewall Support Adaptor (4)
JCO2734
Regular price $ 14.00 Sale price $ 11.99 Save $ 2.01/
Shipping calculated at checkout.
JConcepts 1/10th 2.2" Buggy Tire Inner Sidewall Support Adaptors are a great option for ultimate sidewall support. On tracks with higher traction, the sidewall can deflect causing oversteer and inconsistencies. Gluing these into the inside of the sidewall makes the sidewall of the tire much harder helping to reduce traction rolling. In addition, when conditions are bumpy or dusty, the added support drives smoother and with more consistency. Package includes four inner sidewall support adapters.
Features:
Features:
- Precise, fit and finish shaped to tire carcass
- Rubber material, bonds easily with glue
- Interlocking features to align inside tire body
JConcepts 1/8 Buggy Truck Wing F2I (Assorted Colors)
JCO2800B
Regular price $ 18.00 Sale price $ 15.49 Save $ 2.51/
Shipping calculated at checkout.
Drivers routinely search for the ultimate aero package on the 1/8th off-road scene and JConcepts is directly on top of the latest trends with the release of the F2I rear wing. F2I relates to Finnisher related items morphing into a 2nd generation and this new wing fits the bill perfectly. Adding the “I” relates to it being IFMAR competition legal in terms of its side-dams being large enough to comply with rules and procedure on the world-wide racing scene.
Aerodynamics are quite the buzz and the design of the wing is rather traditional with a flat base. Across the width, the 5 individual dividers add straight-line stability and connects the upper and lower deck. Drop louvers on each side split the deck-height funneling air flow through the core and up to the gurney. The industry first design featuring a built-in gurney eliminates the need to add additional pieces, hardware or items which are clumsy.
As with all JConcepts injection molded wings, the side dams are recessed for decals to rest without being exposed directly across its plane. The offset decal plane also provides some stability to the highly impacted area and removes a slight about of weight. To make mounting easier, JConcepts has added a handy grid area underneath to help position the wing side to side and fore and aft for the utmost versatility.
At the races the F2I wing debuted at The Dirt Nitro Challenge in Perris, California. The new wing sat on the TQ vehicles of Dakotah Phend (1/8th E-Buggy and 1/8th Truck) and on the all-important 1/8th Nitro buggy TQ’s vehicle, Seth VanDalen. When the dust settled, it was Ryan Maifield taking the victory in the 1/8th Truck class making the F2I wing a winner at its first event.
Features:
- JConcepts flat base, split deck design
- 5 center dividers across wing width
- Industry first built-in gurney
- Recessed, IFMAR legal side-dams
- Light-weight design and materials
- Molded grid located on the bottom to guide user attachment
JConcepts 1/8 Bullet 83mm Buggy Wheel, Yellow (4)
JCO3357Y
Regular price $ 22.00 Sale price $ 18.99 Save $ 3.01/
Shipping calculated at checkout.
This is a pack of four white JConcepts 83mm Bullet 1/8th Buggy Wheels. Focusing on improving stability and performance on extremely grippy track surfaces, JConcepts Bullet wheels are a lightweight, high-end race design, loaded with JConcepts style and function. The larger 83mm diameter stretches the tire sidewall, slightly flattening the tire profile giving more forward traction and tightens up the reaction felt by the driver.
The wheel features durable yet flexible inner ribbing and lightened features that help to reduce rotating weight. The outer face highlights a slightly concave shape and outer lightening “bullet” holes around the axle area. The wheels incorporate an outer glue catch that helps to channel excess glue and prevent it from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
- JConcepts 83mm design
- 4pc. included per package
- Durable, lightweight design
- Available in white and fluorescent yellow
- Superior inner rib support with lightened features
- Outer lightening “bullet” holes, functional and lightweight
JConcepts 12mm Hex Hazard Short Course Wheels (Black) (2) (TEN-SCTE)
JCO3352B
Regular price $ 10.99/
Shipping calculated at checkout.
This is a set of JConcepts 12mm Hex Hazard Wheels, and are intended for use with the Losi TEN-SCTE 4WD 1/10 Scale Short Course Truck. Short Course trucks have evolved into high-performance racing vehicles and dependability and looks are always the key to success. Introducing the Hazard 12mm hex wheel for the Losi SCT-E by JConcepts. A powerful new look that combines the winning combination of a 10 spoke design, bead-lock appearance and center lug nut detail with a hint of inspiration from yesteryear.
Already a champion, the Hazard style wheel earned the top qualifying position and 1st place at the 2011 ROAR Off-Road Nationals in the Pro 2 modified class in the hands of Ryan Maifield. A dominating performance taking the TQ in the first 3 rounds of qualifying and 1st place in A-main #1 and 2 to take and retain the title for JConcepts.
Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With 3 color options and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle-free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
- Original 1:1 inspired JConcepts Hazard 12mm hex design
- Direct bolt-on fit for the Losi SCT-E
- Durable design, finish and material
- Available in Black, White and Yellow with matte face appearance
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
Compatibility:
- Losi TEN-SCT Nitro
- Losi TEN-SCTE
- Losi TEN-SCTE 2.0
- Losi TEN-SCTE 3.0
JConcepts 12mm Hex Hazard Short Course Wheels (Yellow) (2) (TEN-SCTE)
JCO3352Y
Regular price $ 11.00 Sale price $ 9.35 Save $ 1.65/
Shipping calculated at checkout.
This is a set of JConcepts 12mm Hex Hazard Wheels, and are intended for use with the Losi TEN-SCTE 4WD 1/10 Scale Short Course Truck. Short Course trucks have evolved into high-performance racing vehicles and dependability and looks are always the key to success. Introducing the Hazard 12mm hex wheel for the Losi SCT-E by JConcepts. A powerful new look that combines the winning combination of a 10 spoke design, bead-lock appearance and center lug nut detail with a hint of inspiration from yesteryear.
Already a champion, the Hazard style wheel earned the top qualifying position and 1st place at the 2011 ROAR Off-Road Nationals in the Pro 2 modified class in the hands of Ryan Maifield. A dominating performance taking the TQ in the first 3 rounds of qualifying and 1st place in A-main #1 and 2 to take and retain the title for JConcepts.
Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With 3 color options and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle-free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
- Original 1:1 inspired JConcepts Hazard 12mm hex design
- Direct bolt-on fit for the Losi SCT-E
- Durable design, finish and material
- Available in Black, White and Yellow with matte face appearance
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
Compatibility:
- Losi TEN-SCT Nitro
- Losi TEN-SCTE
- Losi TEN-SCTE 2.0
- Losi TEN-SCTE 3.0
JConcepts 12mm Hex Hazard Short Course Wheels w/3mm Offset (Black) (2) (SC5M)
JCO3344B
Regular price $ 10.99/
Shipping calculated at checkout.
This is a set of two JConcepts Hazard Wheels with a 12mm Hex, and 3mm Offset. These wheels fit the Associated SC5M and SC10 4x4 with no modification, as well as SC10 trucks with 12mm hex adapters.
Short Course trucks have evolved into high-performance racing vehicles and adjustability is always the key to success. Introducing the Hazard 12mm hex wheel for the SC10 4x4 and SC10 by JConcepts. A powerful new look that combines the winning combination of a 10 spoke design, bead-lock appearance and center lug nut detail with a hint of inspiration from yesteryear. The Hazard will make an immediate impact on the performance of the SC10 trucks by widening the stance of the truck by 6mm in overall width. The increased width will maximize the SC10 and bring it up to the ROAR maximum legal limits in dimensional width.
Already a champion, the Hazard wheel earned the top qualifying position and 1st place at the 2011 ROAR Off-Road Nationals in the Pro 2 modified class in the hands of Ryan Maifield. A dominating performance taking the TQ in the first 3 rounds of qualifying and 1st place in A-main #1 and 2 to take retain the title for JConcepts.
By nature, Short Course trucks have a high center of gravity and tend to feel light or tippy in high-speed sections. There is no better way to improve on-track stability than to add width, and with the Hazard wheels, sweeping through the high-speed corners gets a little easier. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With the black color and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting wheels. The hassle-free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
NOTE: To use the 12mm hex wheel on the SC10 requires JConcepts part JCI2081 for the rear, or the Team Associated inboard hub hex conversion components for the front and rear (ASC9883, ASC9880, and ASC9881).
Features:
- Original 1:1 inspired JConcepts Hazard 12mm hex design
- 3mm per side additional width in offset
- Direct bolt-on fit for the SC10 4x4
- Bolt-on fit for the SC10 with 12mm hex adapters
- Durable design, finish and material
- Black in color with matte face appearance
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
Compatibility:
- Team Associated ProLite 4x4
- Team Associated ProRally
- Team Associated ProSC 4x4
- Team Associated RC10 SC5M
- Team Associated RC10 SC6.1
- Team Associated SC10
- Team Associated SC10 4x4
- Team Associated SC10.2
- Team Associated SC10B
- Team Associated SC10GT
JConcepts 12mm Hex Hazard Short Course Wheels w/3mm Offset (White) (2) (SC5M) JConcepts Related products
JCO3344W
Regular price $ 10.99/
Shipping calculated at checkout.
This is a set of two JConcepts 12mm Hex Hazard Wheels, and are intended for use on the front and rear of the Associated SC10 4x4, as well as the SC10 2WD when equipped with a 12mm hex conversion. Short Course trucks have evolved into high-performance racing vehicles and adjustability is always the key to success. The Hazard will make an immediate impact on the performance of the SC10 trucks by widening the stance of the truck by 6mm in overall width. The increased width will maximize the SC10 and bring it up to the ROAR maximum legal limits in dimensional width.
By nature, Short Course trucks have a high center of gravity and tend to feel light or tippy in high-speed sections. There is no better way to improve on-track stability than to add width, and with the Hazard wheels, sweeping through the high-speed corners gets a little easier. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With the black color and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
By nature, Short Course trucks have a high center of gravity and tend to feel light or tippy in high-speed sections. There is no better way to improve on-track stability than to add width, and with the Hazard wheels, sweeping through the high-speed corners gets a little easier. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With the black color and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
- Original 1:1 inspired JConcepts Hazard 12mm hex design
- 3mm per side additional width in offset
- Direct bolt-on fit for the SC10 4x4
- Bolt-on fit for the SC10 with 12mm hex adapters
- Durable design, finish and material
- Available in Black or White with matte face appearance
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
Compatibility:
- Team Associated ProLite 4x4
- Team Associated ProRally
- Team Associated ProSC 4x4
- Team Associated RC10 SC5M
- Team Associated RC10 SC6.1
- Team Associated SC10
- Team Associated SC10 4x4
- Team Associated SC10.2
- Team Associated SC10B
- Team Associated SC10GT
JConcepts 12mm Hex Hazard Wheel, Black (2): Slash
JCO3351B
Regular price $ 10.99/
Shipping calculated at checkout.
This is a set of two JConcepts Hazard Wheels, and are intended for use on the rear of the Traxxas Slash, as well as the front and rear of the Slash 4x4. Short Course trucks have evolved into high-performance racing vehicles and adjustability is always the key to success. The Hazard 12mm hex wheel for the Traxxas Slash and Slash 4x4 has a powerful look that combines the winning combination of a 10 spoke design, bead-lock appearance and center lug nut detail with a hint of inspiration from yesteryear. Already a champion, the Hazard wheel earned the top qualifying position and 1st place at the 2011 ROAR Off-Road Nationals in the Pro 2 modified class in the hands of Ryan Maifield. A dominating performance taking the TQ in the first 3 rounds of qualifying and 1st place in A1 and A2 to retain the title for JConcepts.
Wheel profile, interior and exterior ribbing, and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With 3 color options and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle-free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
Wheel profile, interior and exterior ribbing, and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. With 3 color options and a matte face appearance, being unique is worry free as practically any paint scheme can be matched to these exciting new wheels. The hassle-free and lightweight 1-piece design creates the ultimate race and show wheel for any competition.
Features:
- Original 1:1 inspired JConcepts Hazard 12mm hex design
- Direct bolt-on fit for the rear of the Slash, and F/R Slash 4x4
- Durable design, finish and material
- Available in Black, White and Yellow with matte face appearance
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
Compatibility:
- Traxxas Nitro Slash
- Traxxas Rally
- Traxxas Slash 2wd
- Traxxas Slash 4x4
- Traxxas Slash 4x4 Ultimate
JConcepts 12mm Hex Mono 1/10 Stadium Truck Wheel (4) (T4.1) (White)
JCO3354W
Regular price $ 17.00 Sale price $ 13.75 Save $ 3.25/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex Wheels, and are intended for use with the Team Associated T4.1 1/10 scale stadium truck equipped with the optional 12mm hex conversion. For many years the standard option on the Team Associated 1/10th truck has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated T4.1 truck. Racers have asked for years for an interchangeable front and rear wheel on the T4 and JConcepts has delivered. With the recent release of the Team Associated 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in white and fluorescent yellow.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the Mono 12mm hex wheel on the T4.1 it requires JConcepts Front Axles (JCI2170), 12mm Clamping Hexes (JCI2081) on the front and rear of the vehicle, and also the Team Associated Front Steering Blocks (ASC9880).
Features:
- JConcepts 12mm design and function
- Interchangeable front and rear wheel
- Popular dish styling and detail
- 4 wheels included per package
- Available in white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
Compatibility:
- Team Associated RC10 T4 Original
- Team Associated RC10 T4.1
- Team Associated RC10 T4.2
- Team Associated RC10 T5M
- Team Associated RC10 T6.1
- Tekno RC ET410 Original
- Yokomo YZ-2 T
JConcepts 12mm Hex Mono 1/10 Stadium Truck Wheel (4) (T4.1) (Yellow)
JCO3354Y
Regular price $ 17.00 Sale price $ 13.75 Save $ 3.25/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex Wheels, and are intended for use with the Team Associated T4.1 1/10 scale stadium truck equipped with the optional 12mm hex conversion. For many years the standard option on the Team Associated 1/10th truck has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated T4.1 truck. Racers have asked for years for an interchangeable front and rear wheel on the T4 and JConcepts has delivered. With the recent release of the Team Associated 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in white and fluorescent yellow.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the Mono 12mm hex wheel on the T4.1 it requires JConcepts Front Axles (JCI2170), 12mm Clamping Hexes (JCI2081) on the front and rear of the vehicle, and also the Team Associated Front Steering Blocks (ASC9880).
Features:
- JConcepts 12mm design and function
- Interchangeable front and rear wheel
- Popular dish styling and detail
- 4 wheels included per package
- Available in white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
Compatibility:
- Team Associated RC10 T4 Original
- Team Associated RC10 T4.1
- Team Associated RC10 T4.2
- Team Associated RC10 T5M
- Team Associated RC10 T6.1
- Tekno RC ET410 Original
- Yokomo YZ-2 T
JConcepts 12mm Hex Mono 2.2 Front Wheels (4) (B6/B5/RB6) (White)
JCO3347W
Regular price $ 13.00 Sale price $ 11.38 Save $ 1.62/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex 2.2 Front Wheels, and are intended for use with the Associated B4.1 and Kyosho RB5 1/10 buggies. For many years the standard setup on Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, and JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
- Fits Kyosho RB5 as a direct fit
- Fits B4.1 front with adapters
Compatibility:
- Kyosho Ultima RB5
- Kyosho Ultima RB6
- Kyosho Ultima RB7
- Schumacher Cougar KC
- Schumacher Cougar KD
- Team Associated RC10 B4
- Team Associated RC10 B4.1
- Team Associated RC10 B4.2
- Team Associated RC10 B5
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
- Team Associated RC10 B6
- Team Associated RC10 B6.1
- Team Associated RC10 B6.1D
- Team Associated RC10 B6.2
- Team Associated RC10 B6.2D
- Team Associated RC10 B6D
- XRAY XB2 2017 Carpet
- XRAY XB2 2017 Dirt
- XRAY XB2 2018 Carpet
- XRAY XB2 2019 Carpet
- XRAY XB2 2019 Dirt
- XRAY XB2 Dirt
- Yokomo YZ-2
- Yokomo YZ-2 CA
- Yokomo YZ-2 CAL2
- Yokomo YZ-2 CAL3
- Yokomo YZ-2 DT
- Yokomo YZ-2 DTM
- Yokomo YZ-2 DTM WC
- Yokomo YZ-2 DTM2
- Yokomo YZ-2 DTM3
JConcepts 12mm Hex Mono 2.2 Front Wheels (4) (B6/B5/RB6) (Yellow)-
JCO3347Y
Regular price $ 13.00 Sale price $ 11.25 Save $ 1.75/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex 2.2 Front Wheels, and are intended for use with the Associated B4.1 and Kyosho RB5 1/10 buggies. For many years the standard setup on Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, and JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
- Fits Kyosho RB5 as a direct fit
- Fits B4.1 front with adapters
Compatibility:
- Kyosho Ultima RB5
- Kyosho Ultima RB6
- Kyosho Ultima RB7
- Schumacher Cougar KC
- Schumacher Cougar KD
- Team Associated RC10 B4
- Team Associated RC10 B4.1
- Team Associated RC10 B4.2
- Team Associated RC10 B5
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
- Team Associated RC10 B6
- Team Associated RC10 B6.1
- Team Associated RC10 B6.1D
- Team Associated RC10 B6.2
- Team Associated RC10 B6.2D
- Team Associated RC10 B6D
- XRAY XB2 2017 Carpet
- XRAY XB2 2017 Dirt
- XRAY XB2 2018 Carpet
- XRAY XB2 2019 Carpet
- XRAY XB2 2019 Dirt
- XRAY XB2 Dirt
- Yokomo YZ-2
- Yokomo YZ-2 CA
- Yokomo YZ-2 CAL2
- Yokomo YZ-2 CAL3
- Yokomo YZ-2 DT
- Yokomo YZ-2 DTM
- Yokomo YZ-2 DTM WC
- Yokomo YZ-2 DTM2
- Yokomo YZ-2 DTM3
JConcepts 12mm Hex Mono 2.2 Hex Rear Wheels (4) (TLR 22 5.0) (White)
JCO3326W
Regular price $ 15.00 Sale price $ 12.75 Save $ 2.25/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 2.2 Hex Rear Wheels, and are intended for use with the TLR 22 family of buggies, including the 3.0, 4.0 and 5.0 series. Hardcore racers can now breathe a sigh of relief, JConcepts now has Mono wheels for the TLR 22 buggy. The 22 buggy from TLR racing has been an immediate hit on and off the race track and JConcepts is quick to release direct fit wheels specifically for this new buggy. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When the TLR 22 strikes, JConcepts delivers.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
Features:
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
Compatibility:
- Losi 22
- Losi 22 2.0
- Losi 22 3.0
- Losi 22 3.0 SPEC-Racer
- Losi 22 4.0
- Losi 22 4.0 SPEC-Racer
- Losi 22 5.0 AC
- Losi 22 5.0 DC
- Losi 22 5.0 SR
- Losi 22-4
- Losi 22-4 2.0
JConcepts 12mm Hex Mono 2.2 Rear Wheels (4) (B6/B74/RB6) (White)
JCO3348W
Regular price $ 15.00 Sale price $ 12.75 Save $ 2.25/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex 2.2 Rear Wheels, and are intended for use with the Associated B4.1, B44.1 and Kyosho RB5 1/10 buggies. For many years the standard setup on Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, and JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
- Fits Kyosho RB5 and as a direct fit
- Fits B4.1, and B44.1 with adapters
Compatibility:
- HB Racing D418
- Kyosho Lazer ZX-5
- Kyosho Lazer ZX-6
- Kyosho Lazer ZX-6.6
- Kyosho Lazer ZX7
- Kyosho Ultima RB5
- Kyosho Ultima RB6
- Kyosho Ultima RB7
- Losi 22 1.0
- Losi 22 2.0
- Losi 22 3.0
- Losi 22 3.0 SPEC-Racer
- Losi 22-4 1.0
- Losi XXX-4
- Schumacher CAT L1
- Schumacher Cougar KC
- Schumacher Cougar KD
- Serpent Spyder SDX-4
- Serpent Spyder SRX-2 MM
- Serpent Spyder SRX-2 RM
- Serpent Spyder SRX-4
- Team Associated RC10 B4 Original
- Team Associated RC10 B4.1
- Team Associated RC10 B4.2
- Team Associated RC10 B44 Original
- Team Associated RC10 B44.1
- Team Associated RC10 B44.2
- Team Associated RC10 B44.3
- Team Associated RC10 B5 Original
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
- Team Associated RC10 B64 Original
- Team Associated RC10 B64D
- Team Associated RC10 B74 Original
- Team Associated RC10 B74.1
- Team Associated RC10 B74.1D
- Team Associated RC10B6 Original
- Team Associated RC10B6.1
- Team Associated RC10B6.1D
- Team Associated RC10B6.2
- Team Associated RC10B6.2D
- Team Associated RC10B6D
- XRAY XB2 2017 Carpet
- XRAY XB2 2017 Dirt
- XRAY XB2 2018 Carpet
- XRAY XB2 2019 Carpet
- XRAY XB2 2019 Dirt
- XRAY XB2 Dirt
- XRAY XB4 2016
- XRAY XB4 2017
- XRAY XB4 2018
- XRAY XB4 2019
- XRAY XB4 2WD
- XRAY XB4 Original
- Yokomo YZ-2 CA
- Yokomo YZ-2 CAL2
- Yokomo YZ-2 CAL3
- Yokomo YZ-2 DT
- Yokomo YZ-2 DTM
- Yokomo YZ-2 DTM WC
- Yokomo YZ-2 DTM2
- Yokomo YZ-2 DTM3
- Yokomo YZ-2 Original
- Yokomo YZ-2 T
- Yokomo YZ-4 SF
JConcepts 12mm Hex Mono 2.2 Rear Wheels (4) (B6/B74/RB6) (Yellow)
JCO3348Y
Regular price $ 15.00 Sale price $ 13.14 Save $ 1.86/
Shipping calculated at checkout.
This is a set of four JConcepts Mono 12mm Hex 2.2 Rear Wheels, and are intended for use with the Associated B4.1, B44.1 and Kyosho RB5 1/10 buggies. For many years the standard setup on Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, and JConcepts - Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers.
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
The Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
To use the 12mm hex wheel on the B4.1 it requires JConcepts part JCI2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part JCI2135 clamping front hex. Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes
- Advanced manufacturing process and durable material
- Fits Kyosho RB5 and as a direct fit
- Fits B4.1, and B44.1 with adapters
Compatibility:
- HB Racing D418
- Kyosho Lazer ZX-5
- Kyosho Lazer ZX-6
- Kyosho Lazer ZX-6.6
- Kyosho Lazer ZX7
- Kyosho Ultima RB5
- Kyosho Ultima RB6
- Kyosho Ultima RB7
- Losi 22
- Losi 22 2.0
- Losi 22 3.0
- Losi 22 3.0 SPEC-Racer
- Losi 22-4
- Losi XXX-4
- Schumacher CAT L1
- Schumacher Cougar KC
- Schumacher Cougar KD
- Serpent Spyder SDX-4
- Serpent Spyder SRX-2 MM
- Serpent Spyder SRX-2 RM
- Serpent Spyder SRX-4
- Team Associated RC10 B4
- Team Associated RC10 B4.1
- Team Associated RC10 B4.2
- Team Associated RC10 B44
- Team Associated RC10 B44.1
- Team Associated RC10 B44.2
- Team Associated RC10 B44.3
- Team Associated RC10 B5
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
- Team Associated RC10 B6
- Team Associated RC10 B6.1
- Team Associated RC10 B6.1D
- Team Associated RC10 B6.2
- Team Associated RC10 B6.2D
- Team Associated RC10 B64
- Team Associated RC10 B64D
- Team Associated RC10 B6D
- Team Associated RC10 B74
- XRAY XB2 2017 Carpet
- XRAY XB2 2017 Dirt
- XRAY XB2 2018 Carpet
- XRAY XB2 2019 Carpet
- XRAY XB2 2019 Dirt
- XRAY XB2 Dirt
- XRAY XB4
- XRAY XB4 2016
- XRAY XB4 2017
- XRAY XB4 2018
- XRAY XB4 2019
- XRAY XB4 2WD
- Yokomo YZ-2
- Yokomo YZ-2 CA
- Yokomo YZ-2 CAL2
- Yokomo YZ-2 CAL3
- Yokomo YZ-2 DT
- Yokomo YZ-2 DTM
- Yokomo YZ-2 DTM WC
- Yokomo YZ-2 DTM2
- Yokomo YZ-2 DTM3
- Yokomo YZ-2 T
- Yokomo YZ-4 SF
JConcepts 12mm Hex Mono Front Wheel (4) (B74)
JCO3381Y
Regular price $ 13.12 Sale price $ 11.05 Save $ 2.07/
Shipping calculated at checkout.
The JConcepts 12mm Hex Mono Front Wheel for the B64 is purpose designed wheel for this popular kit. JConcepts Mono 2.2” wheels are designed in the popular dish style and available in bright white and fluorescent yellow. The B64 has not been left out of the Mono wheel development and while the rear easily utilizes the same configuration as the B6 vehicles, the front wheel, is a matching stylized wheel that is a direct bolt-on for the kit.
The B64 front Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight convex dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
Features:
The B64 front Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight convex dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
Features:
- Popular dish styling and detail
- 4 wheels included per package
- Available in bright white and fluorescent yellow
- Vent holes included for ease of operation
- Advanced manufacturing process and durable material
- Direct fit for the front of the Team Associated B64
Compatibility:
- Schumacher CAT L1
- Team Associated RC10 B64
- Team Associated RC10 B64D
- Team Associated RC10 B74
- Yokomo YZ-4 SF
JConcepts 1970 Chevy K10, Axial SCX24 Body
JCO0445
Regular price $ 28.00 Sale price $ 23.99 Save $ 4.01/
Shipping calculated at checkout.
Features
- Officially licensed by General Motors to JConcepts
- Direct fit for Axial SCX24 scale | trail trucks
- Scale inspired body, cab, and window design
- Multiple, 1:1 headlight and grille treatment options
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed Chevrolet decal sheet included
Overview
During the late 60’s and early 70’s, the major vehicle manufacturers determined it was time for trucks to stop looking so “trucky.” One of the leaders in this movement was Chevrolet. It was not an easy task but now owners could be proud of their purchase and snappy looks and display it in the driveway. Trucks were functional, but now, they were also great looking on the exterior and a little fluffier in the interior to provide more comfort during chores, commuting and even hard work.
On the RC side of things, JConcepts has a passion for pick-ups and the 70’s models who shaped the off-road and tough working truck community. The popularity of the 1/24th scale crawler trucks sent JConcepts to the trenches in search of the ultimate line of iconic trucks to compliment a range of vehicles. The 1970 shell is powerful, and the square body shape is a shout-out to simpler times when a hard day’s work was a bedful of goodness.
For the 1970, a lot of the glamour rested in the front grille and headlight package as well as the layered and sculpted rear tail gate and taillight section. These details are found on the included decal sheet along with many emblems and trim packages to complete your body in several popular looks from that generation. A chiseled front-end is gently swept back from the center. Fenders wells are round with raised edging making them ideal for several different 1/24th scale tires on the market.
The hood on the Chevy is rock solid in shape that planes across the center ridgeline. The cab and windshield are a key styling point on this creation and the “cap” look to the cab has the hard edge around the sides and visor like appearance to the front. Side windows fit within the geometry as expected with classic vent windows lining the front corner. The bed styling features the bodylines that make the Chevy authentic vintage and a slight recess in back provides a healthy setting for body mounts or other aftermarket accessories.
A small front bumper is molded into the design giving the truck solid looks without bolt-on parts or additional pieces. Side-markers on the 1970 are horizontal which is also included in the decal sheet. The wheel wells are large and tasteful 1:1 representation for the most clearance or maximum articulation with large tires, it might be necessary to trim further into the fender flares for extra-large tire sizes.
The years 1967-1972 showed a lot of looks through Chevrolet and GMC variants. With small changes to grille, headlights, and trim packages throughout the years, JConcepts has added a bonus to the included decal sheet. An incredible 4 different grille options are included on the sheet giving the user the option of their favorite package from yesteryear. Hard panned single headlight and double light bezel setups are included which contain bar and tube grille combinations. In addition, a plethora of badges are offered on the sheet featuring Cheyenne, Custom, C/10, C/20, and CST/10 combinations. 70’s fans, let us appreciate. JConcepts has the body for you.
Product Specifications
| Material | Polycarbonate |
| Scale | 1/24 |
JConcepts 1984 Ford F-250 Monster Truck Body (Clear)
JCO0306
Regular price $ 44.00 Sale price $ 37.55 Save $ 6.45/
Shipping calculated at checkout.
1984 Ford F-250 MT Scale Body, for Custom 1/10 Scale Monster Trucks
Officially licensed by Ford to JConcepts
Body measures 7.25" in width and 13" wheelbase
Fits a variety of platforms including solid axle race trucks
Scale inspired body, cab and window design
1:1 headlight and grill treatment
Clear heavy-duty polycarbonate with protective film
Considered to be the last of the "classic" Ford trucks, the 1984 model screams 80's style and features a Ford oval (by decal) placed in the center of the grille. With the single cab design, long bed and flat body panels, the square body trucks from this generation look just plain mean! The Ford bloodline runs deep with the hard body lines running horizontally top and bottom which helps to create a rigid panel. The front windshield is large and in charge and offers the scale driver a clear view of the road ahead.
The body measures 7.25" width and is built for a 13" wheelbase truck. The body is carved with traditional rectangle arched wheel wells but can be trimmed larger for jumbo tires such as the Renegades and Firestorms, found on the typical RC monster truck. The JConcepts product includes a clear body shell, paint mask for all windows and detailed Ford and JConcepts logo decal sheet.
Shown painted for display purposes only
Features:
JConcepts 1993 Ford F-150, Axial SCX24 Body
JCO0447
Regular price $ 28.00 Sale price $ 23.80 Save $ 4.20/
Shipping calculated at checkout.
Features
- Outer Diameter: 1.97 in / 50mm
- Advanced X4 Compound
- Fits 1.0" Wheels
- Includes Foam Inserts
- Width: 0.7in / 18mm
- Inner Diameter: 1 in / 25.4mm
Overview
Key Features
- Advanced X4 Compound
- Outer Diameter: 1.97 in / 50mm
- Width: 0.7in / 18mm
- Inner Diameter: 1 in / 25.4mm
- Each Tire Weight: 0.25oz / 7g
- Includes Foam Inserts
- Fits 1.0" Wheels
For the ninth generation, the body-shell of the 1993 Ford F-Series was given another major upgrade. To further improve its aerodynamics, the forward bodywork was given a slightly lower hood line, rounding the front fenders and grille. The “Blue Oval,” a trademark of all Ford pickups, makes a striking appearance centered in the grille. Stout fender flares are carved ever so carefully in to the panels while openings allow for a vast assortment of tires on the market. The F-150 single-cab look is strong and is a careful reminder of a time when passengers sat side-by-side during a typical outing.
JConcepts has now made available the Ford body shell to enthusiasts with the Axial SCX24. The hard body-line positioned front to back give the truck heart and the “Built Ford Tough” personality. The lowered section of the bed allows for body mount positioning or an assortment of scale aftermarket accessories. A small front bumper is built into the body which can either be tucked behind the single tube bumper found on the Axial or simply positioned without stock items for more street truck appeal. The body comes clear and includes an authentic decal sheet and easy to use window mask for the detailed hobbyist.
Features:
- Officially licensed by Ford to JConcepts
- Direct fit for Axial SCX24 scale | trail trucks
- Scale inspired body, cab and window design
- 1:1 headlight and grill treatment
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed Ford sheet included
JConcepts 2.2" Bearing Front Stadium Truck Wheels (White) (4) (RC10T/T2/T3/GT)-
JCO3418W
Regular price $ 17.00 Sale price $ 14.49 Save $ 2.51/
Shipping calculated at checkout.
Overview
JConcepts supports the vintage RC enthusiast with the release of new Mono wheels. The original offset front wheels for the RC10T have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2" Mono wheels are inspired by the originals, feature the iconic dish shape and utilize the non-flanged 3/16 x 3/8" bearing.
The wheels include a vent hole on the outer diameter and an outer lip to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are molded in a durable material with precise techniques to ensure dependability and performance. Mono wheels are available in bright white and fluorescent racing yellow, packaged 4 pieces per package and backed with JConcepts racing heritage and customer support.
Features
- Classic dish styling
- Popular 2.2" mounting bead diameter
- Available in bright white and fluorescent racing yellow
- Durable material, precision molding techniques
- Compatible with RC10T, T2, T3 and GT
Specifications
- Color
- White
- Inner Tire / Outer Wheel Diameter
- 2.2 in
- Package Type
- Wheels Only
- Quantity Option
- Four
- Scale
- 1/10
- Vehicle Type
- Stadium Truck
- Wheel Position
- Front
- Wheel Type
- Mono
Compatibility:
- Team Associated RC10 GT2
- Team Associated RC10 T4 Original
- Team Associated RC10 T4.1
- X Factory X-60
JConcepts 2.2" Street Eliminator Front Wheel, 12mm Hex, Chrome
JCO3399C
Regular price $ 15.00 Sale price $ 12.75 Save $ 2.25/
Shipping calculated at checkout.
As the street eliminator scene shifts to a new gear, JConcepts is on-board with another wheel option for the popular segment. Just in time for the latest release from Team Associated, the DR10, the chrome Tactic wheels are direct replacements and upgrades to that vehicle. Back in 2018, JConcepts released the first street eliminator wheel, the StarTec and it was immediately a great hit with street racers around the world.
During the early part of the 2019 racing season, the design team mocked up a new wheel and just like that, the new Tactic wheel was competition ready. The heavy spoke design and 1:1 influence imposes their will on the competition. The front wheel design extends to the outer edges giving the wheel a larger look while the rear style has a mock bead lock appearance and hefty lug detail. The inner ribbing spreads like the roots of a tree to secure the inner 12mm hub geometry.
The front Tactic wheels feature a 2.2” size which match to just about any existing buggy tire on the market while the rear wheel features a beefy, SCT 2.2” x 3.0” size and fit any SCT tire already produced. The wheels fit a vast number of vehicles for anyone looking to undertake a Street Eliminator project and accept a 12mm hex drive. Popular vehicles which use the Tactic wheels include, the Traxxas Slash, Bandit, Rustler as well as the popular line-up of Team Associated short course trucks and now, the purpose built DR10.
The chrome look gives the wheels serious street appearance and look ultra-low under any race car. The Tactic wheels match perfectly with JConcepts Hotties tires (#3193 front) and (#3194 rear) for the Street Eliminator look. The wheels have been plated in chrome and areas have been masked in non-viewing or wheel nut connection points. Non-marring 4mm wheel locknuts have been included for a cleaner installation and less damaging installation. (Serrated locknuts are not recommended in this application.) The JConcepts wheels are molded in a durable material and the product is always backed by JConcepts customer service, supported, and developed by professionals with style and authenticity.
Notes from the team –
The chrome plated parts are only intended for appearance and light use. Due to the nature of the plating process, the chrome is fragile and not meant for heavy crashes or hits. Please be aware that the chrome plating may chip or peel during abusive situations and they are not covered under any warranty because of the delicate nature of the process.
Features:
- Original 1:1 inspired chrome Tactic 12mm hex design
- Durable design and material
- Hassle free and lightweight 1-piece design
- Devastatingly handsome
JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)
JCO0418
Regular price $ 69.00 Sale price $ 51.00 Save $ 18.00/
Shipping calculated at checkout.
2019 Cadillac ATS-V, Street Eliminator Clear Body
The ATS-V Cadillac is eager to represent against all other performance rides. JConcepts took on recommendations from racers to adapt the coupe style vehicle for the drag racing community. The Cadillac features a V-shaped front-end with details chiseled into the headlight area, which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recessed vents.
The grille as detailed with the included decal sheet, which allows the edginess of the Cadillac style to stand out and look massive. The included front hood-scoop brings a drag racing flair and blends up to the windshield. Fender flares protrude from the main body shape, and blend in along the rocker-panels.
The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included. A 2019 Cadillac ATS-V decal sheet and the paint mask for all windows are included.
Specifications -
The Cadillac measures a 13.00" wheelbase and the inside dimensions of the body are 11.50" front and 12.00" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It is helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Cadillac body.
Body is sold clear. Shown painted and mounted for display purposes only.
Features:
Compatibility:
- Team Associated DR10
- Traxxas Slash
JConcepts 83mm Bullet 1/8th Buggy Wheel (4) (White)
JCO3357W
Regular price $ 22.99 Sale price $ 22.45 Save $ 0.54/
Shipping calculated at checkout.
This is a pack of four white JConcepts 83mm Bullet 1/8th Buggy Wheels. Focusing on improving stability and performance on extremely grippy track surfaces, JConcepts Bullet wheels are a lightweight, high-end race design, loaded with JConcepts style and function. The larger 83mm diameter stretches the tire sidewall, slightly flattening the tire profile giving more forward traction and tightens up the reaction felt by the driver.
The wheel features durable yet flexible inner ribbing and lightened features that help to reduce rotating weight. The outer face highlights a slightly concave shape and outer lightening “bullet” holes around the axle area. The wheels incorporate an outer glue catch that helps to channel excess glue and prevent it from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.
- JConcepts 83mm design
- 4pc. included per package
- Durable, lightweight design
- Available in white and fluorescent yellow
- Superior inner rib support with lightened features
- Outer lightening “bullet” holes, functional and lightweight
JConcepts 8IGHT-X Elite "P1" 1/8 Buggy Body (Clear)
JCO0421
Regular price $ 34.00 Sale price $ 28.99 Save $ 5.01/
Shipping calculated at checkout.
The JConcepts 8IGHT-X Elite"P1" 1/8 Buggy Body features incredibly low side-pods, with an ultra-heavy chamfer. However, the power scoops along the cab add some overall muscle to the design. The P1 has a broad cab and the placement moves it forward just behind the body mount and front shock tower. The body was designed to turn and cut through the rough stuff with balance and precision. A centered roof “shark fin” is light and adds, tracking stability and rigidity to the tallest and most pressure sensitive area on the vehicle. Behind the cab, things begin to get interesting with an engine bay roof-top blended into rear kick-up winglets. The rear winglets strike where it gets hot, just behind the engine heat-sink and gives that last bit of downforce area prior to the rear shock tower.
Each P1 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. Performance driven, battle tested – JConcepts is, World Proven Innovation and Design.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
- Original – JConcepts P1 design
- Incredibly low side-pod layout
- Power scoops for added muscle
- Cock-pit “shark fin” for added stability
- Engine bay, roof-top
- Rear winglets for downforce
- Clear polycarbonate with protective film
- Includes window masks and decal sheet
Compatibility:
- Losi 8IGHT-X
- Losi 8IGHT-X Elite
JConcepts 8ight-XT Front Body Mount Adaptor Carbon Fiber with Hardware
JCO2953
Regular price $ 25.00 Sale price $ 21.25 Save $ 3.75/
Shipping calculated at checkout.
JConcepts unveiled a new body during the 2021 ROAR Fuel Nationals for the 1/8th truck division. The F2 body was constructed to perform at the highest level using the latest trend of reducing surface area above the shock tower line, reducing the overall weight while maintaining a tight silhouette. No stranger to Truggy bodies, the JConcepts team has developed a successful line of bodies with the Punisher and Finnisher designs, and each has excelled and peaked during ROAR championship events. For the 2021 event, the team focused on a behind tower concept body to fit 5 chassis configurations including the Mugen, Team Associated, TLR, HB, and Tekno.
To mount the F2 body on to the 8ight-XT, a carbon fiber adaptor #2953 is needed along with the Team Associated #81447 body mounts (not included) to place the front of the body in correct position. Each truck has a specific adaptor produced in carbon fiber which bolts directly to the stock tower and once adding the (not included) body mount, provides a custom fit and beautiful finish.
Assembly notes –
To begin, install or mock-up the (not included) AE body mount #81447 into the center position on the carbon fiber adaptor by using included hardware. Tighten the screw while allowing the mount to “notch” in to place to give the mount a vertical and stationary position. In some cases, depending on vehicle, the body mount may need to be completely installed to the adaptor first, due to hidden or closed-off screw locations. Once the mount is positioned, attach the carbon fiber adaptor to the shock tower using 3mm hardware and secured in to place with 3mm lock nuts.
Once the carbon fiber adaptor of choice is attached to the shock tower, review the instructions on body trimlines to accommodate the vehicle of choice. It is important to follow along to position body mount holes, perimeter cutlines and possible engine head cut-out and fuel tank openings to the appropriate vehicle. Once the carbon adaptor is in position and body is trimmed for the vehicle, the painting and detailing process can be completed in traditional fashion. #gojconcepts
JConcepts 9-Shot Short Course Wheels w/3mm Offset (2) (Black) w/12mm Hex
JCO3420
Regular price $ 15.00 Sale price $ 12.75 Save $ 2.25/
Shipping calculated at checkout.
JConcepts 9-Shot Short Course Wheels offer unique styling for 1/10th SCT off-road and dirt oval racers. The 9 shot is 1:1 inspired to provide the ultimate performance to off-road racing vehicles around the world. The 9 spoke design, 2.2” x 3.0” mounting diameter, 12mm hex base design fits a huge assortment of vehicles competing in the market such as the Team Associated SC6 genre.
The 9 shot features a deep 3D depth spoke with mock 5 lug bolt pattern to bring SCT trucks, SCT Late Model, A-Mod, and B-Mod vehicles to another level of scale inspiration on the racing scene. The JConcepts replacement wheels are available 2 pieces per package and available in white, black, and yellow color styles. The 9 shot wheels are the maximum size allowed under ROAR rules and make a statement with their large, open spoke appearance, slight concave dish shaped design and superior inner rib design.
The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability.
Features:
- 1:1 inspired 9 shot styling and detail
- 2 wheels included per package
- Available in bright white, black, and fluorescent yellow colors
- Vent holes
- Advanced manufacturing process and durable material
- Fits a huge assortment of SCT off-road vehicles
Compatibility:
- Team Associated RC10 SC5M
- Team Associated RC10 SC6.1
- Team Associated SC10 4x4
- Team Associated SC10.2
JConcepts Advanced Formulated Tire Glue (Assorted Glues)
JCO2043M
Regular price $ 12.00 Sale price $ 10.99 Save $ 1.01/
Shipping calculated at checkout.
This is a bottle of JConcepts Advanced Formulated Tire Glue. Tire gluing security is now only one step away with the release of the JConcepts Advanced Formulated Tire Glue. Available in a medium viscosity, the advanced formulated glue has proven to be a winner on and off the track with its incredible tack security, packaging and contents. The sealed package contains glue, gluing tip applicator, strip decal and desiccant pack for freshness. Gluing tires is an art form, having the right product, preparation materials and weather conditions all play a role into a properly mounted set of tires. Start off on the right track with JConcepts Advanced Formulated Tire Glue.
Brian Kinwald, tire gluing aficionado and pro driver says: “I glue a lot of tires and this is the best I’ve used.”
JConcepts tips for a properly mounted tire:
Brian Kinwald, tire gluing aficionado and pro driver says: “I glue a lot of tires and this is the best I’ve used.”
JConcepts tips for a properly mounted tire:
- Wash hands prior to assembling and gluing.
- Clean bead area of tire with all purpose cleaner. Green Biodegradable cleaner and window cleaner are popular choices.
- Avoid touching bead area for best bond strength.
- Use only high quality (JCI2043M), purpose built tire glue.
- Slide the glue tip applicator partially (force fit) onto bottle and cut tube to desired length.
- Pull back tire bead area and apply a liberal amount of glue to mating surfaces.
- Wipe excess glue with a rag and allow to dry in a warm ventilated area. Direct sunlight is best.
- Place JConcepts tire mounting rubber bands (JCI2005) around the outside of the sidewall to assist in proper positioning.
- Check your work and perform any touch-up necessary.
- Go racing.
JConcepts Aero Lower Front Wing (2)
JCO0157
Regular price $ 11.99/
Shipping calculated at checkout.
The JConcepts Aero Lower Front Wing was developed with the JConcepts pro team drivers to provide 1/10 racers with an additional high-performance, lower mounted front wing. The lower front wing mounts in a more forward position and is easy to trim, use and test without sacrificing track time. The front wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. The lower front wing is not car specific and can be used on most all 1/10th off-road buggies
Fit | Finish
Cut lines are included for easy trimming while dimples are located on the wing itself to indicate where to mount to the JConcepts front wing mount (not included). The leading center section of the wing has been formed into a unique V-shape to perfectly flow and maneuver around the camber links and tower or front shocks.
Front wing mount option
Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection molded part, the 3D print item should give ample support to drivers wanting to utilize the JConcepts designed parts for a completely matched setup as used by the factory race team.
Features:
Fit | Finish
Cut lines are included for easy trimming while dimples are located on the wing itself to indicate where to mount to the JConcepts front wing mount (not included). The leading center section of the wing has been formed into a unique V-shape to perfectly flow and maneuver around the camber links and tower or front shocks.
Front wing mount option
Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection molded part, the 3D print item should give ample support to drivers wanting to utilize the JConcepts designed parts for a completely matched setup as used by the factory race team.
Features:
- Original JConcepts design
- High-attack, V-angle design
- Radical, edgy design
- Light-weight and durable design
- Trim lines and dimpled location for JConcepts front wing mount
Compatibility:
- Losi 22 3.0
- Losi 22 3.0 SPEC-Racer
- Team Associated RC10 B5M
- Team Associated RC10 B5M Factory Lite
JConcepts Aluminum Camber Gauge (85mm) (Black)
JCO2283-2
Regular price $ 42.00 Sale price $ 35.97 Save $ 6.03/
Shipping calculated at checkout.
The next generation of 1/10th off-road racing revolves around setup, precision and accuracy. The JConcepts camber gauge, manufactured from billet aluminum material is brilliantly machined to high specifications and anodized to a luster. The detailed instrument is available in either blue or black anodizing and laser etched with graduated measurements from -10 to +10 degrees for a complete range of camber adjustments.
The camber gauge comes preassembled with 4mm hardware for the pivot and thumbscrew as the setting knob. The structure features chamfered silver edging, highlighting the design. The alignment arm on the gauge is heavily chamfered which creates the perfect touch point against the tire and wheel. Each gauge comes in a latch box with foam insert which fits snugly around the instrument with heavy cushion. When racing gets serious, get precise with JConcepts.
Every setup sheet contains camber information and the only way to achieve it properly is with a trusty gauge. The gauge simply operates with 2 pivoting pieces which can be secured by using the thumbscrew. Checking the camber starts by setting the vehicle at running height on a flat surface and viewing, by eye, the front-end of the vehicle. If the visual camber is close, slide the gauge over to the base of the front tire and pivot the arm up until it touches the tire or wheel surface. At the touch point, secure the thumb screw on the gauge and check the etched marking. Adjust the camber link turnbuckles and repeat for all 4 corners until the desired camber is achieved.
To set camber, secure the thumbscrew on the etched number which is preferred. Slide the gauge over to the base of the front tire and watch for the touch point of the gauge against the tire. If the gauge touches at the top first you must add negative camber to get within the range of your setting. If the gauge touches at the bottom first you’ll need to add positive camber to move within range. After adjustments are made, fine tune until the tire rests top and bottom against the gauge and repeat for all 4 corners until the desired camber is achieved.
Features:
- Pre-assembled, lightweight, aluminum construction
- Available in blue or black anodizing
- Laser etched graduated measurements
- Highly chamfered alignment arm as a touch off point
- Chamfer highlighted edging
- Included latch box with foam cushion
JConcepts Aluminum Ride Height Gauge (10-40mm) (Assorted Colors)
JCO22821
Regular price $ 40.00 Sale price $ 34.00 Save $ 6.00/
Shipping calculated at checkout.
This is the JConcepts Aluminum Ride Height Gauge. A successful off-road racing program requires precise and accurate setup. Machined from billet aluminum, the JConcepts ride height gauge is a high spec, detailed instrument that provides the precision your car deserves. The high polish, laser etched gauge features graduated measurements from 10-40mm so it can be used on a variety of vehicles. The ride height gauge is preassembled with 4mm hardware for the pivot, with a 3mm setscrew and thumbscrew as the setting knob. The structure features chamfered silver edging to highlight the design and the touch-off point on the gauge is a rounded boss that always meets the chassis at the proper angle. Each gauge includes a latched box with foam insert that fits snugly around the tool, keeping it safe wherever you go.
Checking the ride height is done by placing the base against a setting board or flat surface. The user operates the pivoting arm freely to touch off against the bottom of the vehicle chassis. At the touch point, secure the thumb screw on the gauge and check the etched marking.
To set the ride height, secure the thumbscrew on the etched number which is preferred. Place the gauge underneath the vehicle (front and rear) at the predetermined height and touch the suspension to the gauge. If a gap exists, raise shock collars to lower the ride height until it's matched to the gauge. If no gap exists or the spacing is too tight, lower the shock collars to raise the ride height to the desired amount. Most racers like a half millimeter space or a small feeling of space during a final check.
Features:
- Pre-assembled, lightweight, aluminum construction
- Available in blue or black anodizing
- Laser etched graduated measurements
- Rounded boss as a touch off point
- Chamfer highlighted edging
- Included latch box with foam cushion
JConcepts Associated B3.1 "S15" Body (Clear)
JCO0393
Regular price $ 34.00 Sale price $ 28.99 Save $ 5.01/
Shipping calculated at checkout.
The JConcepts Associated B3.1 "S15" Body blends performance features on the popular Silencer body with features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep rooted position allows the engine head maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the Team Associated RC8B3.1 and other kit variants.
What started out as a simple task was anything but. For the precise fit, the design has undergone changes to match the Team Associated chassis side-guards and body mount positioning. The S15 stance cockpit allows ample fuel tank access, a smoother high-speed windshield transition which tackles even the most high-speed conditions. The hard edged chamfering provides the classic JConcepts look while also delivering aero benefits and perfect decal positioning. Each S15 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
- JConcepts S15 styling
- Forward cab bias, dual channeling rear escape
- Mid-body Winglets and rear stabilizer kick-up
- Cock-pit “shark fin” for added stability
- Clear polycarbonate with protective film
- Includes window mask and decal sheet
Compatibility:
- Team Associated RC8B3
- Team Associated RC8B3.1
JConcepts Associated B6.4/B6.4D "F2" Body w/Carpet Wing (Clear)
JCO0475
Regular price $ 35.00 Sale price $ 29.99 Save $ 5.01/
Shipping calculated at checkout.
The JConcepts B6.4/B6.4D "F2" Body with Carpet Wing uses the latest design philosophies from the team at JConcepts. Built specifically to fit the B6.4 chassis this F2 body has a lower profile cab lowering the center of gravity and looking great at the same time. Additional width has been added to the spur gear area over previous versions to make sure there are no fitment issues when using the three pad slipper assembly. Trim lines have also been updated throughout to make for a nicer fitting body with a slim front nose to fit just under the front shock tower. The rear side-pods have been simplified to allow smoother driving characteristics and more room for decal placement.
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
- Updated JConcepts F2 design
- Blended wing / body design
- Includes two Hi-Clearance carpet or turf wing rear wings
- Clear polycarbonate with protective film
- (1) JConcepts B6.4/B6.4D "F2" Body with Carpet Wing
- (1) Decal sheet
- (1) Window masks
Compatibility:
- Team Associated RC10B6.4
- Team Associated RC10B6.4D
JConcepts Associated B6.4/B6.4D "P2" Buggy Body w/Carpet Wing (Clear) (Lightweight)
JCO0476L
Regular price $ 35.00 Sale price $ 29.99 Save $ 5.01/
Shipping calculated at checkout.
The JConcepts B6.4/B6.4D "P2" Buggy Body with Carpet Wing for the Team Associated B6 vehicle is the meanest, nastiest thing out for 1/10th buggy racing. The Punisher 2 separates itself from the rest with its distinctive styling. The P2 is all about performance with riveting details including raised nose/hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a vane to keep the buggy tracking in the proper direction while also maintaining a rigid roof-line even with light-weight materials. The P2 body is also available in a standard weight version (JCO0476) giving you extra durability.
The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
- Original JConcepts Punisher 2 styling
- Raised nose/hood with taller P2 cab
- Drop-in cab with rear-end winglets
- Tall, rear fin stabilizer for tracking performance
- (1) Associated B6.4/B6.4D "P2" Light Weight Buggy Body (Clear)
- (1) Carpet Wing (Clear)
Compatibility:
- Team Associated RC10B6.4
- Team Associated RC10B6.4D
JConcepts Associated B6.4/B6.4D "S2" Body w/Turf Wing (Clear)
JCO0474
Regular price $ 29.99/
Shipping calculated at checkout.
The JConcepts Associated B6.4/B6.4D "S2" Body with Turf Wing brings a competitive edge to the B6.4 platform. Dubbed the S2, this shell rocks some familiar features but rolled together with a low-profile stance. The S2 is a performer straight out of the package and the Aero rear wing helps deliver results on any racing circuit.
Slammed overall height allows the S2 to whisk through the turns with a low center of mass while the progressive cab design provides plenty of front-end force for superior balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of the cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout.
The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate 3 and 4 gear lay-down transmission layouts as well as the “dirt” 3 gear stand-up configuration, giving all out versatility.
Note: This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.
Note: This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.
Features:
- JConcepts original Silencer 2 styling
- Direct fit for B6.4 and B6.4D
- Aggressive, progressive cab design
- Channeled roof with center stabilizer
- Useable side-pod vents
- Includes two Carpet/Turf rear wings
- Includes JConcepts decal sheet and window mask
- Also available in a light weight version (JCO0474L)
Compatibility:
- Team Associated RC10B6.4
- Team Associated RC10B6.4D
JConcepts B6/B6D "F2" Buggy Body w/6.5" Aero Wing (Clear)
JCO0315
Regular price $ 30.00 Sale price $ 25.50 Save $ 4.50/
Shipping calculated at checkout.
This is the JConcepts B6/B6D "F2" Buggy Body with an included 6.5" Aero Buggy Wing. Cleverly named, F2, the unique design quickly raised some eyebrows during testing and proved effective on the ground and in the air. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance.
The F2 body is a drop fit for the popular Team Associated B6 and B6D buggies. Cut-lines are included on each side of the body to accommodate stand-up 3 or 4 gear and lay-down transmission layouts giving all out versatility. With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which help steering rotation in low traction corners.
The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The front of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear which can be trimmed to allow air to escape at the top of the body.
In addition to the body, JConcepts has included two of the latest Aero rear wings used by Ryan Cavalieri, Ryan Maifield and Spencer Rivkin to a 1st, 2nd and 4th place finish at the 2017 Reedy Race of Champions.
Features:
- Original - JConcepts F2 design
- Blended wing / body design
- Includes two Aero rear wings
- Compatible with stand-up 3 and 4 gear and lay-down transmission
- Clear polycarbonate with protective film
- Window masks and decal sheet
Compatibility:
- Team Associated RC10 B6
- Team Associated RC10 B6.1
- Team Associated RC10 B6.1D
- Team Associated RC10 B6.2
- Team Associated RC10 B6.2D
- Team Associated RC10 B6D
JConcepts B6/B74 "Aero" S-Type Rear Wing
JCO0173
Regular price $ 14.00 Sale price $ 11.99 Save $ 2.01/
Shipping calculated at checkout.
JConcepts B6/B64 "Aero" S-Type Rear Wing is developed and manufactured by JConcepts Inc. The S-type wing includes options not yet seen before on a 1/10th off-road rear wing. An extended rear gurney lip makes tuning that much better for more grip on loose surfaces while running the latest generation in off-road. The base of the wing design is built on the popular Aero wing but with new additions which make the wing more durable, more adjustable and ultimately a great tuning piece.
The S-type wing is a direct bolt-on piece for the Team Associated B6, B6D | B64, B64D. The wing features a long chord construction with revised section to incorporate some reinforced ribbing in the vertical plane below the over-hanging gurney. Cut-lines and dimpled locations are positioned throughout for trim and tuning options. The dimples in the rear can be reamed to expose larger holes which serve as pass-through for circulating air and helps the vehicle maintain its position during long flight jumps.
Features:
The S-type wing is a direct bolt-on piece for the Team Associated B6, B6D | B64, B64D. The wing features a long chord construction with revised section to incorporate some reinforced ribbing in the vertical plane below the over-hanging gurney. Cut-lines and dimpled locations are positioned throughout for trim and tuning options. The dimples in the rear can be reamed to expose larger holes which serve as pass-through for circulating air and helps the vehicle maintain its position during long flight jumps.
Features:
- Innovative design, durable material
- Industry first, forward gurney option
- Clipped rear corners minimize breakage
- Large openings for tire clearance and expansion
- Dimples for pass-through hole tuning
- Pro-level height and rake angle
- 1/10th off-road wizardry
Compatibility:
- Team Associated RC10 B6
- Team Associated RC10 B6.1
- Team Associated RC10 B6.1D
- Team Associated RC10 B64
- Team Associated RC10 B64D
- Team Associated RC10 B6D
- Team Associated RC10 B74
JConcepts Carpet, Turf, 7" Wing Pre-Trimmed
JCO0504
Regular price $ 17.00 Sale price $ 14.66 Save $ 2.34/
Shipping calculated at checkout.
Overview
A new High-Clearance Wing as pre-trimmed has been developed and manufactured by JConcepts Inc. The 7” wide HCW incorporates a short-chord design for quick rotation and a flat-base which provides more tire clearance. As the carpet, Astroturf, and high-traction dirt conditions become more prevalent, racers have asked for a specific 7” rear wing. The durable and pre-trimmed design has chopped rear corners for rigidity plus a traditional lower-level gurney that is achievable for even less drag over large jumps.
The side-dams of the wing feature hard radius cut-outs which allow even more tire rear expansion and flex space. JConcepts designers Paul Wynn and Fred Reep added dual stability fangs which also help boost the front to rear structure. The rear of the wing still maintains a high-angle to vertical rear dam to give drivers a straight-forward layout suited to high-speed circuits. The HCW is a direct bolt-on piece for most 1/10th buggies and includes one pre-trimmed wing per package.
Features
- Pre-trimmed
- Innovative 7” HCW design, durable material
- Clipped rear corners minimize breakage
- Large openings for tire clearance and expansion
- Pro-level height and rake angle
- 1/10th off-road wizardry, ROAR National Champion
Specifications
- Accessory Type
- Wing
- Color
- Clear
- Material
- Polycarbonate
- Scale
- 1/10
- Vehicle Type
- Buggy
