Servos



Savox SC-1258TG Standard Digital "High Speed" Titanium Gear Servo **

Savox SC-1258TG Standard Digital "High Speed" Titanium Gear Servo **

$ 63.99 Save $ 26.00

This is the Savox SC-1258TG Standard Size Coreless Digital High Speed Titanium Gear Servo. The Savox SC-1258TG combines leading edge technology with super high 12 bit (4096) resolution and Titanium Gears. Features:  Light weight Coreless Motor provides high speed, incredible efficiency, and low power consumption Super strong titanium gears  The Aluminum Case design not only looks good but also allows for lower operating temperatures. Totally Green – from materials to production, these servos are environmentally friendly. Ideal for CCPM on 600...

Savox SB-2274SG "High Speed" Brushless Steel Gear Digital Servo (High Voltage) **

Savox SB-2274SG "High Speed" Brushless Steel Gear Digital Servo (High Voltage) **

$ 99.99 Save $ 25.00

  This is the Savox SB-2274SG High Speed Brushless Steel Gear Digital Servo. Features:  Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears. Super light-weight. Brushless motor provides extremely high speed, incredible efficiency, and amazingly low power consumption. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps. Totally green – from materials to production, these servos are environmentally friendly. Ideal for 1/8th or 1/10th scale trucks...

ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek) **

ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek) **

$ 7.79 Save $ 0.21

This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features:  19mm hole spacing (measured from output shaft screw hole, to...

Options
Team Losi Racing Aluminum Servo Horn (25T-Futaba/Orion/Savox/ACE) (TLR 22) **

Team Losi Racing Aluminum Servo Horn (25T-Futaba/Orion/Savox/ACE) (TLR 22) **

$ 10.99 Save $ 2.00

This is a Team Losi Racing Aluminum Servo Horn, intended for use with the Team Losi Racing 22 1/10 buggy. Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22SCT Losi 22SCT 3.0 Losi 22T Losi 22T 2.0 Losi TEN-SCTE 3.0  

Savox SB-2292SG Black Edition Monster Torque Brushless Steel Gear Servo (High Voltage) **

Savox SB-2292SG Black Edition Monster Torque Brushless Steel Gear Servo (High Voltage) **

$ 139.99 Save $ 30.00

This is the Savox SB-2292SG Black Edition Monster Torque Brushless Steel Gear High Voltage Servo. The Savox Monster Torque servo utilizes a unique brushless motor and controller technology to boost power up to 35% over previous generation servos. Features:  Full Aluminum Case 3 Precision Ball Bearings Brushless Motor  High Voltage  Specifications:  Torque: @6V: 305 oz-in (22 kg-cm) @7.4V: 430 oz-in (31 kg-cm) Speed: @6V: 0.085/60° sec @7.4V: 0.07/60° sec Dimensions (L x W x H): 40.3x20.2x38.7mm Weight: 79.0g

Team Associated Servo Tape Strip (2) **

Team Associated Servo Tape Strip (2) **

$ 4.99

This is a pack of replacement servo tape from Team Associated. Includes two strips of servo tape. Compatibility: Team Associated Apex Team Associated Nomad DB8 Team Associated Pro SC10 Team Associated ProLite 4x4 Team Associated ProSC 4x4 Team Associated RC10 B4 Team Associated RC10 B4.1 Team Associated RC10 B4.2 Team Associated RC10 B44 Team Associated RC10 B44.1 Team Associated RC10 B44.3 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B64 Team...

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T) **

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T) **

$ 12.99

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

$ 15.25 Save $ 0.74

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune...

Savox SW-1210SG "Tall" Waterproof Aluminum Case Digital Steel Gear Servo (High Voltage) **

Savox SW-1210SG "Tall" Waterproof Aluminum Case Digital Steel Gear Servo (High Voltage) **

$ 83.99 Save $ 21.00

This is the Savox SW-1210SG "Tall" Waterproof Aluminum Case Steel Gear Digital Servo. The SW-1210SG is a coreless, waterproof digital servo that delivers great torque for applications that use a larger 42mm tall servo. This servo features a speed of .15 and 277.7 oz-in of torque @ 6.0V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for greater precision when dodging puddles. This is a great upgrade if your looking to drive your RC...

Savox SC-1267SG "Super Speed" Digital Steel Gear Servo (High Voltage) **

Savox SC-1267SG "Super Speed" Digital Steel Gear Servo (High Voltage) **

$ 79.99 Save $ 20.00

This high speed high voltage servo will give you all the performance you need without breaking the bank. For under $100 the SC-1267SG offers you the complete package. This steel geared servo is water resistant with 4 silicon seals implanted. So if you want to blow by the competition then this servo is for you! Features: Combines leading edge technology with super high 12 bit (4096) resolution. Higher performance due to increased voltage and improved technology Incredible torque Increased transit...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T) **

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T) **

$ 12.99

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

Traxxas 2075 Digital High Torque Waterproof Servo **

Traxxas 2075 Digital High Torque Waterproof Servo **

$ 39.95 Save $ 6.04

This is a replacement Traxxas Digital High Torque Waterproof Servo. Specifications: Torque: 125 oz-in Speed: 0.17 sec/60°  Compatibility: Traxxas E-Revo VXL 2.0 Traxxas Nitro Slash Traxxas Rally Traxxas Rustler Traxxas Rustler 4x4 Traxxas Slash Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Spartan Traxxas Stampede Traxxas Stampede 4x4 Traxxas Telluride 4x4 Traxxas Villain EX Traxxas XO-1

Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T) **

Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T) **

$ 11.99

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos Compatibility: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6D Team Associated RC10 SC6.1

ProTek RC Aluminum Clamping Servo Horn (Black) (25T-ProTek) **

ProTek RC Aluminum Clamping Servo Horn (Black) (25T-ProTek) **

$ 11.99

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm...

Tekno RC EB410 Aluminum Servo Horn (25T) **

Tekno RC EB410 Aluminum Servo Horn (25T) **

$ 16.76 Save $ 1.23

Tekno EB410 Aluminum Servo Horn. This low profile clamping style 25T horn uses M3 clamp screws and is a must have EB410 upgrade. Compatibility: Tekno RC EB410 Tekno RC ET410

Savox SW-0230MG Waterproof Metal Gear Digital Servo (High Voltage) **

Savox SW-0230MG Waterproof Metal Gear Digital Servo (High Voltage) **

$ 39.99 Save $ 10.01

This is the Savox SW-0230MG Waterproof Metal Gear Digital Servo. The SW-0230MG is a budget friendly waterproof digital servo capable of operating at 6.0V and 7.4V. This brushed servo features a quick speed of .13 and 111.1 oz-in of torque @ 7.4V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for greater precision when dodging puddles. This is a great upgrade if your looking to drive your RC vehicle in any condition, including rain,...

Savox SW-1211SG Waterproof Case Digital Steel Gear Servo **

Savox SW-1211SG Waterproof Case Digital Steel Gear Servo **

$ 83.99 Save $ 21.00

The Savox SW-1211SG Servo is an extremely versatile waterproof servo that's a great updgrade to standard RTR servos and fits many conditions where use is vital in rain, sleet, or snow. Features:  Waterproof construction for harsh elements. Strong unique steel gears provide durability and assurance. Capable of HV operation. Ideal for 1/10 vehicles and boats Specifications: Torque @ 6v: 15.0kg/208.3oz-in Torque @ 7.4v: 15.0kg/347.2oz-in Speed @ 6v: 0.10 sec/60 deg Speed @ 7.4v: 0.08 sec/60 deg Dimensions L x W x H (mm): 40.6 x 20.7 x 42.0 Weight: 71.0g

Savox SC-1268SG "High Torque" Digital Steel Gear Servo (High Voltage) **

Savox SC-1268SG "High Torque" Digital Steel Gear Servo (High Voltage) **

$ 79.99 Save $ 20.00

This is the Savox SC-1268SG High Voltage High Torque Digital Steel Gear Servo. Savox have now released their 'High Voltage' servo line that can be powered by a unregulated LiPo battery! These servos combine leading edge technology with super high 12 bit (4096) resolution. These servos also feature a redesigned motor/controller unit, and use a 'bullet proof' all steel gear set for unmatched strength. Features: No Regulator needed Higher performance due to increased voltage and improved technology Fast response Incredible...

Savox SB-2290SG Black Edition Monster Torque Brushless Steel Gear Servo (High Voltage) **

Savox SB-2290SG Black Edition Monster Torque Brushless Steel Gear Servo (High Voltage) **

$ 139.99 Save $ 30.00

This is the Savox SB-2290SG Black Edition Monster Torque Brushless Steel Gear High Voltage Servo. The Savox Monster Torque servo utilizes a unique brushless motor and controller technology to boost power up to 35% over previous generation servos. Features: Full Aluminum Case 3 Precision Ball Bearings Brushless Motor High Voltage Up to 694 oz-in of torque! Specifications:Torque: 6V: 555.5 oz-in; 7.4V: 694.4 oz-inSpeed: 6V: 0.16/60° sec; 7.4V: 0.13/60° secDimensions (L x W x H): 40.3x20.2x38.7mmWeight: 79.0g Compatibility: Traxxas TRX-4

Savox SB-2273SG "High Torque" Brushless Servo (High Voltage) **

Savox SB-2273SG "High Torque" Brushless Servo (High Voltage) **

$ 99.99 Save $ 25.01

This is the Savox SB-2273SG High Torque Brushless Steel Gear Digital Servo. Features:  Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears. Super light-weight. Brushless motor provides extremely high speed, high torque, incredible efficiency, and amazingly low power consumption. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps. Totally green – from materials to production, these servos are environmentally friendly. Ideal for 1/8th or 1/10th scale...

Traxxas High Torque Waterproof Servo **

Traxxas High Torque Waterproof Servo **

$ 33.95 Save $ 0.05

This is a replacement Traxxas High Torque Waterproof Servo.  Features: 80 oz-in torque Transit time 0.23 sec/60° Compatibility: Traxxas Blast Traxxas E-Maxx Traxxas M41 Traxxas Nitro Slash Traxxas Rustler Traxxas Spartan Traxxas Stampede Traxxas Villain EX

Team Associated Factory Team Aluminum Servo Horn (25T-Futaba/Savox/ProTek) **

Team Associated Factory Team Aluminum Servo Horn (25T-Futaba/Savox/ProTek) **

$ 12.99 Save $ 0.01

The Team Associated Factory Team Aluminum Servo Horn was developed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e models. These machined aluminum servo horns are stronger than the stock plastic horns that come with most servos and due to the slightly shorter length, they provide a smoother steering feel and decrease the load on the servo. 25T fits Futaba, XP Digital, Reedy, Savox and ProTek servos. Features:  7075 T6 aluminum Clamping style with large m2.5 screw Length...

Savox SA-1230SG Tall Digital Steel Gear Servo **

Savox SA-1230SG Tall Digital Steel Gear Servo **

$ 71.99 Save $ 18.01

This is the Savox SA-1230SG Tall Digital "Monster Torque" Steel Gear Servo.Features: Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears. Super light-weight. Coreless motor provides extremely high speed, incredible efficiency, and low power consumption. Extremely strong unique steel gears ensure long-life and durability. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps. Servos are environmentally friendly. Ideal for giant scale aircraft, monster truck, 1/8...

EcoPower 640T 13g Waterproof Metal Gear Digital Sub Micro Servo (TRX-4) **

EcoPower 640T 13g Waterproof Metal Gear Digital Sub Micro Servo (TRX-4) **

$ 32.00 Save $ 3.99

The Ecopower 640T 13g Waterproof Metal Gear Digital Sub Micro Servo is an incredibly powerful sub micro option developed to provide a more rugged upgrade for the Traxxas TRX-4. But, this servo is a great upgrade for any sub micro servo application! Delivering 64 oz-in of torque and .09 transit speed at 6.0V, the 640T will operate at a level that makes other sub micro servos feel inadequate in comparison. The servo features an all metal gear train for durability...

Team Associated Factory Team Aluminum Servo Horn (23T-JR/Airtronics/KO) **

Team Associated Factory Team Aluminum Servo Horn (23T-JR/Airtronics/KO) **

$ 12.99

The Team Associated Factory Team Aluminum Servo Horn was developed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e models. These machined aluminum servo horns are stronger than the stock plastic horns that come with most servos and due to the slightly shorter length, they provide a smoother steering feel and decrease the load on the servo. 23T fits Airtronics, JR, KO, and Spektrum servos. Features:  7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for...

Traxxas Servo Gear Set (TRA2070/TRA2075) **

Traxxas Servo Gear Set (TRA2070/TRA2075) **

$ 4.00

This is a replacement Traxxas Servo Gear Set, and is intended for use with the TRA2070 & TRA2075 Traxxas Servos. Compatibility: Traxxas E-Revo VXL 2.0 Traxxas Nitro Slash Traxxas Rally Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Unlimited Desert Racer Traxxas XO-1  

Team Losi Racing Aluminum Servo Horn (24T-Hitec) (TLR 22) **

Team Losi Racing Aluminum Servo Horn (24T-Hitec) (TLR 22) **

$ 10.99 Save $ 2.00

This is a Team Losi Racing Aluminum Servo Horn, intended for use with the Team Losi Racing 22 1/10 buggy. Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22SCT Losi 22SCT 3.0 Losi 22T Losi 22T 2.0 Losi TEN-SCTE 3.0

Team Losi Racing 22-4 Aluminum Servo Horn (25T-Futaba/Orion/Savox/ProTek) **

Team Losi Racing 22-4 Aluminum Servo Horn (25T-Futaba/Orion/Savox/ProTek) **

$ 13.99 Save $ 2.00

This is an optional Team Losi Racing 22-4 Aluminum Servo Horn. This servo horn fits servos with a 25T spline output shaft and will provide increased rigidity in the steering system. Compatibility: Losi 22-4

Savox SB-2263MG High Speed Low Profile Brushless Steel Gear Servo **

Savox SB-2263MG High Speed Low Profile Brushless Steel Gear Servo **

$ 79.99 Save $ 19.01

Savox's SB-2263MG Black Edition "High Speed" Low Profile Brushless Steel Gear Servo features a sleek black aluminum center case with laser etched details, as well as a shorter heavy duty wire. These servos combine leading edge technology with super high 12 bit (4096) resolution. These servos also feature a brushless motor/controller unit, and use a 'bullet proof' all steel gear set for unmatched strength that makes them ideal for 1/10 touring car and off road  applications that require a high...

Options
Savox SA-1283SG Aluminum Case Digital "Super Torque" Steel Gear Servo **

Savox SA-1283SG Aluminum Case Digital "Super Torque" Steel Gear Servo **

$ 94.99 Save $ 35.00

This is the Aluminum Case Savox SA-1283SG Super Torque Steel Gear Digital Servo. Features:  Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears. Super light-weight. Coreless motor provides high speed, incredible efficiency, and low power consumption. Extremely strong unique steel gears ensure long-life and durability. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps. From materials to production, these servos are environmentally friendly. Ideal for rock...

Traxxas Waterproof Micro Servo **

Traxxas Waterproof Micro Servo **

$ 28.95

This is a replacement Traxxas Waterproof Micro Servo.    TRAXXAS 1/16 E-REVO   TRAXXAS 1/16 MUSTANG   TRAXXAS 1/16 RACE TRUCK   TRAXXAS 1/16 RALLY   TRAXXAS 1/16 SLASH   TRAXXAS 1/16 SUMMIT

Traxxas 2070/2075 Plastic Servo Gear Set **

Traxxas 2070/2075 Plastic Servo Gear Set **

$ 4.00

This is a replacement Traxxas Plastic Servo Gear Set for use with the Traxxas 2070 and 2075 servos. Also included are two bearings.

Reedy Aluminum Clamping Servo Horn (25T-Reedy) **

Reedy Aluminum Clamping Servo Horn (25T-Reedy) **

$ 17.99

Team Associated Aluminum Servo Horn. This is the clamping type horn that fits 25T Reedy Servos. Compatibility: Team Associated RC8B3.1e Team Associated RC8T3 Team Associated RC8T3e Team Associated TC7.1 Team Associated TC7.2

Spektrum RC 500WP Digital Servo **

Spektrum RC 500WP Digital Servo **

$ 22.49 Save $ 7.51

This is a Spektrum 500WP Digital Servo. This servo is compatible with the Losi Mini 8IGHT and Mini 8IGHT-T vehicles with AVC, but is faster and stronger than the servo included with non AVC equipped Mini 8IGHT vehicles making it a great option for those vehicles as well.  Specifications: Size Category: Minis and Micros Type: Digital Torque: 54 oz-in @ 6.0V Speed: .16 sec/60 degrees @ 6.0V Bushing Or Bearing: Bushing Gear Type: Nylon Compatibility: Losi Mini 8IGHT Losi Mini 8IGHT AVC Losi Mini 8IGHT-T Losi...

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (23T) **

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (23T) **

$ 14.25 Save $ 0.75

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum alloy and anodized black color. The horn has been machined to the exact specifications and dimensions of the plastic Team Associated ASC9180 servo horn, but provides the precision, rigidity and durability required for the latest generation of high-performance R/C vehicles. The horn also weighs a mere two grams while providing the insurance of the clamping design...