Rock Crawling
804 products
804 products
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Sale
Quick view
Axial 1/18 Yeti Jr. Can-Am Maverick 4WD Brushed RTR
AXI90069
Overview
Features
- Licensed Can-Am Maverick body and wheels
- Licensed Maxxis Bighorn 2.0 tires
- Spektrum STX2 2.4GHz transmitter
- Spektrum waterproof ESC/Receiver Combo
- Dynamite 37T brushed electric motor
- High-torque metal gear servo for rough offroad conditions
- AR18 solid rear axle with ample ground clearance
- Adjustable coilover shocks
- Three-linked rear suspension for improved handling
- Independent front suspension for high speed stability
- Rear hinge body mount system
- 48P gears give you more possible configurations
- Adujstable motor mount and easy access chassis
- Full vehicle ball bearings
- Adjustable battery tray
- Centered rear driveshaft for efficiency
- Easy to Use USB Charger Included
Overview
The Yeti Jr™ RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale - then tops it off with a licensed Can-Am® Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures!
Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis® Bighorn 2.0 radial tires, you've got all the traction you need for fast, smooth rides over virtually any surface.
Spektrum STX2 Transmitter
The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting.
- Built-in 3-position throttle limiter
- Steering & throttle rate & trim adjustments with throttle and steering reversing
- FHSS 2.4GHz protocol offers extended range and interference free performance
- AA batteries included
Spektrum ESC/Receiver Combo
The Spektrum ESC/Receiver is an all in one unit featuring an EC3 battery connector, a convenient on- off switch and it's water resistant for peace of mind when water splashes on your electronics.
WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.
37T Brushed Electric Motor
Delivering an even balance of speed and technical adventuring, the Dynamite Tazer 380 37T motor features a worry-free design with enlarged cooling ports for extended periods of use. The motor is paired with a 15T pinion and 60T spur gear for extra speed!
- 37T, 380 size motor
- Waterproof
Metal Gear Servo
Steering is powered by a Spektrum high torque micro servo, featuring a metal gear train to help withstand rough offroad conditions.
- 4.8V Torque: 34.9 oz-in (2.5 kg-cm)
- 6.0V Torque: 41.8 oz-in (3.0 kg-cm)
- 4.8V Speed: 0.09 sec/60°
- 6.0V Speed: 0.08 sec/60°
Dynamite 1300mAh NiMH Battery
The included Dynamite 1300mAh NiMH battery pack features a convenient EC3 connector and a 1300mAh charge capacity.
- Type: NiMH
- Connector Type: EC3
- Capacity: 1300mAh
- Cell Size: 2/3A
- Voltage: 7.2V
- Configuration: Flat
Dynamite USB Charger
The Dynamite 6-Cell NiMH USB battery charger is small, compact, and easy to operate. Simply plug into a USB power source and plug the NiMH battery into the charger and you're charging.
NOTE: For use with 6-cell NiMH batteries only.
AR18 Solid Rear Axle
To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the AR18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling.
Rear suspension features:
- 8mm axle with 12mm hex adapter
- Open diff
- 61mm-90mm 7mm diameter shocks with 3mm shocks shafts
- Multiple shock mounting positions
Adjustable Coilover Shocks
The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the dampening rate.
- 46mm-63mm 7mm diameter front shocks
- 61mm-90mm 7mm diameter rear shocks
- 3mm shock shafts
Three-Linked Rear Suspension
The Yeti Jr.™ features a three-linked rear suspension design with integrated sway-bar like support for improved handling. The rear axle has upper and lower mounting points for the trailing arm, allowing you to fine tune your suspension setup.
Independent Front Suspension
The Yeti™ Jr. is equipped with an Independent Front Suspension (IFS) system to help maintain high-speed stability when running through a diverse range of terrain. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. The stability that the IFS front end provides is paramount for off road racing.
Front suspension features:
- Machined aluminum CVD's
- 8mm axle with 12mm hex adapter
- Open diff
- 2.50mm hingepins
- 46mm-63mm 7mm diameter shocks with 3mm shocks shafts
- Multiple shock mounting positions
Rear Hinge Body Mount System
The body mount system allows easy access to the electronics with only the removal of two body mount clips.
48P Gears
No micro gearing here, instead the drivetrain features 48P gears, which is not only a robust design but also expands the number of possible gearing configurations. The spur gear is mated to a 15T metal pinion gear for optimal gearing.
Adjustable Motor Mount
Adjusting gear mesh to accommodate different sized pinion or spur gears has never been easier with the help of a cam style motor mount design. The front top plate secures the cam motor plate in place and all the screws thread down into the chassis, eliminating the need for extra-long hex drivers in order to secure the motor and gear mesh.
Full Ball Bearings
Just because the Yeti Jr. is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the Yeti Jr. drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
Maxxis Bighorn 2.0 Tires
Maxxis Bighorn 2.0 tires feature a non-directional tread pattern that is suitable for use in a wide variety of conditions such as hard packed dirt, soft terrain, and traversing scale trails in your backyard!
Can-Am Wheels with 12MM Hex
The stylish and sturdy Can-Am wheels feature a standard sized 12mm hex for a strong, durable fit.
Adjustable Battery Tray
The battery tray is fully height adjustable with multiple configurations available. It's easily changeable between 6-Cell NiMH battery packs or smaller battery packs. The integrated battery tray can be easily accessed without having to remove any body clips or even the body, allowing for quick battery swaps.
Centered Rear Driveshaft
The rear driveshaft is centered for efficiency, and is mated to the rear differential outdrive which is captured by a bearing to keep things running smoothly.
Specifications
- Approximate Assembly Time
- No assembly required
- Ball Bearings
- Full set, sealed cartridge type
- Body
- Can-Am Maverick X3 UTV, trimmed and painted, rear hinge body mount system
- Bushing Material
- Metal
- Charger
- Included
- Chassis
- Molded tub style with rear trailing arms
- Completion Level
- Ready-To-Run
- Differential
- Bevel gear 35T/15T
- Drivetrain
- 4WD
- Front Track
- 6.9" (175mm), distance from outer edges of tires measured side-to-side
- Gear Pitch
- 48-Pitch
- Ground Clearance
- 1.1" (27mm)
- Motor Size
- 380 Brush Equipped, 37 Turn
- Motor Type
- Brushed
- Outer Diameter
- 2.8 in (72mm)
- Pinion
- 15T
- Power Type
- Electric
- Product Height
- 6.5" (165.1mm)
- Product Length
- 11" (279.4mm)
- Product Weight
- 1.6lbs (0.7kg)
- Product Width
- 7" (177.8mm)
- Radio
- Included
- Rear Track
- 6.9" (175mm) distance from outer edges of tires measured side-to-side
- Receiver
- Included
- Scale
- 1/18
- Shock Type
- Coil over, oil-filled, 3mm shafts
- Speed Control
- Included
- Spur Gear
- 60T
- Suspension
- Front-Independent, Rear-3-Link w/integrated sway bar like support, AR18 2-pc solid rear axle w/captured pinion gear
- Tire Tread
- Bighorn
- Vehicle Type
- Rock Racer
- Water-Resistant
- Yes
- Wheel Type
- Plastic, black in color, 12mm hexes
- Wheelbase
- 8.1" (205mm)
Traxxas '79 Ford Bronco Ranger TRX-4 RTR 1/10 Trail Crawler Truck
TRA82046-4-RED
SCALE AND TRAIL™
A Stunning Achievement in Scale Detail and Realism
Originally introduced in 1966 as a 4X4 compact SUV, the Ford Bronco matured as a full-size truck in the late 1970s, cementing its status as a rugged off-roader. Traxxas honors the classic 1979 Ford Bronco with this beautifully detailed and faithful reproduction mounted on the incredibly capable TRX-4® chassis. From the chrome wheels and bumpers to the gorgeous Sunset or red graphics, the TRX-4 recaptures the Bronco’s iconic era with the toughness and technology that could only come from Traxxas.
Originally introduced in 1966 as a 4X4 compact SUV, the Ford Bronco matured as a full-size truck in the late 1970s, cementing its status as a rugged off-roader. Traxxas honors the classic 1979 Ford Bronco with this beautifully detailed and faithful reproduction mounted on the incredibly capable TRX-4® chassis. From the chrome wheels and bumpers to the gorgeous Sunset or red graphics, the TRX-4 recaptures the Bronco’s iconic era with the toughness and technology that could only come from Traxxas.
MODEL 82046-4: 1/10 Scale 4X4 Trail Truck, Fully-Assembled, Waterproof electronics,
Ready-To-Drive®, with TQi™ 2.4GHz 4-channel Radio System, XL-5 HV Speed Control,
Hi/Low Transmission, Remote Locking Differentials, and painted body
Model Specs
| Model Name: | TRX-4 Bronco |
|---|---|
| Model Type: | Trail / Crawler |
| Model Skill Level: | 1 |
| Scale: | 1/10 |
| Weight: | 6.42 pounds (2.91 kg) |
| Length: | 20.57 inches (523 mm) |
| Width: | 9.78 inches (249 mm) |
| Front Track: | 9.78 inches (249 mm) |
| Rear Track: | 9.78 inches (249 mm) |
| Height: | 10.47 inches (266 mm) |
| Wheelbase: | 12.28 inches (312 mm) |
Motor Specs
| Motor Name: | Titan® 21T Reverse Rotation |
|---|---|
| Motor Type: | High-torque brushed motor |
| Motor Weight: | 8.47 ounces (240 g) |
| Motor Length: | 3.07 inches (78 mm) overall length, 2.25 inches (57 mm) can length |
| Motor Diameter: | 1.53 inches (39 mm) |
| Motor Shaft Size: | 3 mm |
| Motor Connector Type: | Bullet |
ESC Specs
| ESC Name: | XL-5™ HV |
|---|---|
| ESC Type: | Brushed |
| ESC Case Size: | 1.23 inches (31 mm) / 2.18 inches (55 mm) / 1.04 inches (26 mm) |
| ESC Weight: | 2.60 ounces (74 g) |
| Motor Connectors: | Bullet |
| Battery Connectors: | Traxxas High-Current Connector |
| ESC Power Wire: | 14 gauge |
Traxxas TRX-4 Defender RTR Crawler w/ XL5HV
TRA82056-4-TAN
SCALE AND TRAIL™
Now Available in Blue!
The Traxxas TRX-4®Scale and Trail™ Crawler is an all-new Traxxas design that is loaded with innovation that instantly obsoletes the status quo with exciting new features, versatility, and capability. In other words, we built it the Traxxas way, rugged, powerful, and ready for fun!
Underneath the authentic scale look is a machine built for extreme off-road capability that takes you to new places and new adventures. Exclusive portal axles deliver maximum ground clearance that dramatically turns “no way” into “no problem.” Whether you are enjoying outdoor trails or getting technical on the rocks, the remote-locking front and rear differentials and high/low range transmission provide unmatched driving versatility.
MODEL 82056-4: Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz Radio System, XL-5® HV Electronic Speed Control, and Titan® 21T 550 motor. Available in Red, Silver, Orange, and Yellow.
Traxxas TRX-4 2021 Ford Bronco RTR 1/10 Trail Crawler Truck
TRA92076-4-ORNG
The Traxxas TRX-4 2021 Ford Bronco combines the award winning TRX-4 chassis with the legendary sixth generation pony truck. Traxxas has captured the 2021 Bronco in exacting detail, with the capability and versatility that made the TRX-4 a leader in it's class. Class-leading performance and a licensed 2021 Bronco create a recipe for adventure, no matter where the trail takes you.
Features:
- Clip-less Body Mounting System: The Bronco introduces a higher level of realism and convenience to the TRX4. Traditional posts and body clips are gone, and instead an integrated quick release system secures the body invisibly. The hidden mechanism holds tight on the trail yet releases in just seconds to access the chassis.
- Stunning Scale Details: Injection molded door handles, mirrors and fender flares, plus a functional spare tire deliver incredible realism. Unique "Trail Sights" extend to the LED ready grille, while rugged replica bumpers feature a fairlead, tow hooks and receiver hitch.
- TRX-4 Capability: The features that make TRX-4 an award winning favorite are all built into the Bronco. That includes high clearance portal axles, remote operated T-Lock differentials, high/low 2 speed transmission, aluminum GTS shocks, steel ladder frame - and more!
- The Power of Portals: Portal axles lift the truck at the wheels for improved center pumpkin ground clearance. In order to achieve the same clearance with straight axles, your tires would have to be over an inch taller that the tires on the TRX-4 Bronco.
- Torque Twist Eliminated: The portal axles use gear reduction at the wheels to virtually eliminate torque twist. The Titan 550 motor's torque translates into straight, powerful, forward motion, rather than wasted energy twisting your rig right off the rocks.
- GTS Aluminum Shocks: Oil filled coil over GTS shocks deliver silky smooth damping performance and feature threaded aluminum shock bodies for easy ride height adjustments. The convincing scale realism looks great and they perform even better.
- 3S Power System: The XL-5 HV speed control brings 3S LiPo capability for strong efficient running. The powerful 21T Titan motor provides torque to tackle the steepest climbs and all out speed on flat terrain. This efficient system provides up to 2 hours of run time with a Traxxas 3S 5000mAh iD LiPo Battery Pack!
- TQi Radio System: Operate the 2-speed transmission and T-Lock diffs with a touch, and activate cruise control to hold the throttle for long haul comfort. Its all built into the TQi. You can even customize settings via a smartphone with the TRA6511 wireless module.
- Waterproof Electronics: The TRX-4 shrugs off mud, snow and streams with waterproof electronics. The ESC and servos are waterproof, and the receiver is fully protected by a watertight enclosure. TRX-4 delivers all season, all weather adventure.
Model Specs
| Model Name: | TRX-4 2021 Bronco |
|---|---|
| Model Type: | Trail / Crawler |
| Model Skill Level: | 1 |
| Scale: | 1/10 |
| Weight: | 6.42 pounds (2.91 kg) |
| Length: | 22.98 inches (584 mm) |
| Width: | 9.78 inches (249 mm) |
| Front Track: | 9.78 inches (249 mm) |
| Rear Track: | 9.78 inches (249 mm) |
| Height: | 9.4 inches (239 mm) |
| Wheelbase: | 12.8 inches (324 mm) |
SSD RC D Hole 1.9" Steel Beadlock Crawler Wheels (Black) (2)
SSD00003
SSD D Hole 1.9" Steel Beadlock Wheels feature a plated finish, machined aluminum 12mm hubs and beadlock rings, combined with an internal beadlock design and SSD scale hex head bolts to round out the package.
Features:
- Standard 1.9" wheel size
- Standard 12mm hex mount
- Internal beadlock system
- Removable hub
- Compatible with Vanquish SLW Hubs
- Stamped steel wheel with black or zinc plated finish
- CNC machined aluminum hub and rings
- Specially made scale steel 2mm hex head bolts with yellow zinc plating
- Finish off the scale look with SSD Scale Locking Hubs
NOTE:
- A 2mm (M2) hex socket is required. This tool is not included and must be purchased separately (SSD00053).
- Scale hex bolts may need to be tightened or threadlock before use.
Specifications:
Width: 22mm
Offset: +1.5mm
Backspacing: 10.5mm
Weight: 76g
Includes:
- (2) Complete assembled wheels
Compatibility:
- Traxxas TRX-4
