RC Car & Truck Parts

RC Car & Truck Parts



Team Associated Aluminum Front Axle Set (2)

Team Associated Aluminum Front Axle Set (2)

$ 9.99 Save $ 0.01

This is a Team Associated Aluminum Front Axle Set. These lightweight aluminum axles are a direct replacement for the B5M Factory Lite kit, but are also compatible with the standard B5 and B5M kits. The axles weigh approximately 1.5 grams each and are a great upgrade option for racers that want to reduce unsprung weight.   Team Associated RC10 B5 Team Associated RC10 B5M Team Associated RC10 B5M Factory Lite

Team Associated Hex Front Axle (2)

Team Associated Hex Front Axle (2)

$ 8.99 Save $ 0.01

This is a pack of two replacement Team Associated Hex Front Axles.   Team Associated RC10 B5 Team Associated RC10 B5M Team Associated RC10 B5M Factory Lite

Team Associated 12mm Heavy Duty Ballstud Set (8)

Team Associated 12mm Heavy Duty Ballstud Set (8)

$ 15.99 Save $ 0.01

This is a replacement Team Associated 12mm Heavy Duty Ballstud Set, and is intended for use with the Associated SC10 4x4, B5 and B5M vehicles.  Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8T3 Team Associated RC8T3.1 Team Associated RC8T3.1e Team Associated RC8T3e Team Associated SC10 4x4

**Discontinued** Team Associated Plastic Spur Gear (48T) (e-Conversion)

**Discontinued** Team Associated Plastic Spur Gear (48T) (e-Conversion)

$ 6.99 Save $ 0.01

This is an optional Team Associated 48 Tooth, e-Conversion Plastic Spur Gear, and is intended for use with the Associated RC8Be, RC8Te and SC8e vehicles. This part is not included in the ASC80930 e-Conversion for Associated 1/8 vehicles. Compatibility: Team Associated Nomad DB8 Team Associated RC8 Team Associated RC8.2e Team Associated RC8B Team Associated RC8B3e Team Associated RC8T Team Associated SC8 Team Associated SC8.2e

Team Associated Mod1 Pinion Gear w/5mm Bore (16T)

Team Associated Mod1 Pinion Gear w/5mm Bore (16T)

$ 9.99 Save $ 0.01

Team Associated 5mm Bore Mod1 Pinion Gear. This pinion gear features a 5mm bore and mod 1 pitch gears. This gear is recommended for the Team Associated RC8.2e 1/8 Scale buggy and any Team Associated 1/8 scale vehicle equipped with the Team Associated e-Conversion Kit. Choose from 12 through 21 tooth options. Package includes one pinion gear and one set screw.  Compatibility This part fits the following vehicles: Team Associated Nomad DB8 Team Associated RC8 Team Associated RC8.2 Team Associated...

Team Associated Light Spur Gear (46T)

Team Associated Light Spur Gear (46T)

$ 26.49 Save $ 3.50

This is a replacement Team Associated 46 Tooth Light Spur Gear. This package also includes one gasket.    Team Associated RC8B3 Team Associated RC8T3

Team Associated 2.5mm Washers (20)

Team Associated 2.5mm Washers (20)

$ 2.99 Save $ 0.01

This is a pack of twenty replacement Team Associated 2.5mm Washers, and are intended for use with the Associated RC8 family of vehicles. Compatibility This part fits the following vehicles: Team Associated Nomad DB8 Team Associated RC10 B44.2 Team Associated RC10 B44.3 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B64 Team Associated RC10 B64D Team Associated RC10 SC6.1 Team Associated RC8.2 Team Associated RC8.2 RS Team Associated RC8.2e Team Associated...

Team Associated Steering Bearing Set (RC8)

Team Associated Steering Bearing Set (RC8)

$ 15.25 Save $ 0.74

This is a replacement steering bearing set for the Team Associated off-road buggy. Compatibility This part fits the following vehicles: Team Associated Nomad DB8 Team Associated RC8 Team Associated RC8.2 Team Associated RC8.2 RS Team Associated RC8.2e Team Associated RC8B Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e Team Associated RC8T Team Associated RC8T3 Team Associated RC8T3.1 Team Associated RC8T3.1e Team Associated RC8T3e Team Associated SC8 Team Associated SC8.2e

Team Associated RC8 B3e Motor Mount Slide

Team Associated RC8 B3e Motor Mount Slide

$ 17.99 Save $ 2.00

Team Associated RC8 B3e Motor Mount Slide. This is the stock replacement B3e motor mount slide.  Compatibility Team Associated RC8B3.1e Team Associated RC8B3e Team Associated RC8T3.1e Team Associated RC8T3e

Team Associated RC8 B3e Motor Mount

Team Associated RC8 B3e Motor Mount

$ 34.99 Save $ 1.01

Team Associated RC8 B3e Motor Mount. This is the stock replacement B3e motor mount.  Compatibility: Team Associated RC8B3.1e Team Associated RC8B3e Team Associated RC8T3.1e Team Associated RC8T3e

Team Associated Shock Mount Pin (4)

Team Associated Shock Mount Pin (4)

$ 9.99 Save $ 0.01

This is a pack of four replacement Team Associated RC8 B3 Shock Mount Pins. These pins are used to secure the lower shock mount to the suspension arm.

Team Associated Shock Body Seal Retainer (2)

Team Associated Shock Body Seal Retainer (2)

$ 7.99 Save $ 0.01

This is a pack of two replacement Team Associated Shock Body Seal Retainers, intended for use with the RC8B3 Nitro Buggy. These retainers also include two lower shock body o-rings. 

Team Associated Spring Collar (2)

Team Associated Spring Collar (2)

$ 9.99 Save $ 0.01

This is a pack of two replacement Team Associated Spring Collars, intended for use with the RC8B3 Nitro Buggy. These collars also include o-rings. 

Team Associated 39.5mm Rear Shock Body (2)

Team Associated 39.5mm Rear Shock Body (2)

$ 30.49 Save $ 4.50

This is a pack of two replacement Team Associated 39.5mm Shock Bodies, intended for use on the rear shocks of the RC8B3 Nitro Buggy.  

Team Associated Front Anti-Roll Bar Set (3)

Team Associated Front Anti-Roll Bar Set (3)

$ 9.99 Save $ 0.01

This is a replacement Team Associated Front Anti-Roll Bar Set. This set includes three front bars.  Effects of Front Roll Bar Adjustment  Stiffness  Characteristic  Softer Increased Front Chassis Roll Increased Front Traction Decreased Rear Traction Increases Off Power Steering (May Cause Oversteer)  Stiffer Decreased Front Chassis Roll Decreased Front Traction Decreased Off Power Steering at Corner Entry (Increases Understeer) Quicker Steering Response Includes: 2.6mm Gray 2.7mm Blue 2.8mm Yellow 

Team Associated Servo Saver Tube

Team Associated Servo Saver Tube

$ 9.99 Save $ 0.01

This is a replacement Team Associated Servo Saver Tube and Spring Assembly, intended for use with the RC8B3 Nitro Buggy. 

Team Associated Pillow Ball Shim (6)

Team Associated Pillow Ball Shim (6)

$ 13.75 Save $ 0.25

This is a pack of six replacement Team Associated Pillow Ball Shims, intended for use with the Team Associated RC8B3 Nitro Buggy. 

Team Associated Pillow Ball Nut (4)

Team Associated Pillow Ball Nut (4)

$ 16.75 Save $ 1.24

This is a pack of four replacement Team Associated Pillow Ball Nuts, intended for use with the Team Associated RC8B3 Nitro Buggy. These nuts are made from aluminum material and anodized factory team blue. 

Team Associated RC8B3 Factory Team Aluminum Pillow Ball (2)

Team Associated RC8B3 Factory Team Aluminum Pillow Ball (2)

$ 26.49 Save $ 0.51

The Team Associated RC8B3 Factory Team Aluminum Pillow Balls are an optional upgrade for the standard steel pillow balls included with the RC8B3 and RC8B3e kits. Aluminum pillow balls reduce un-sprung mass in the front steering block assembly, resulting in a more aggressive steering feel. These are best suitded for smooth track conditions with high grip levels. Package includes two pillow balls. Two packages are required to convert one chassis.

Team Associated Differential Bearing, 3/16 x 5/16 (2)

Team Associated Differential Bearing, 3/16 x 5/16 (2)

$ 5.99 Save $ 0.01

This is a set of two replacement differential bearings from Team Associated. This bearings go between the differential drive hubs.

Team Associated Differential Thrust Bolt, Bearing Cover & Locking T-Nut

Team Associated Differential Thrust Bolt, Bearing Cover & Locking T-Nut

$ 5.99 Save $ 0.01

This is a replacement t-nut, and thrust bolt set for the Team Associated RC10GT2 1/10th scale off-road truck. This set includes one thrust bolt, one thrust bearing cover, two dog bone spacers, and one t-nut. The parts are intended for use with RC10B4, RC10T4, RC10B4.1, RC10T4.1, RC10GT, RC10GT2, and SC10.   Team Associated Pro SC10 Team Associated RC10 B4 Team Associated RC10 B4.1 Team Associated RC10 B4.2 Team Associated RC10 B5 Team Associated RC10 B5M Team Associated RC10 B5M Factory...

Team Associated .200" Ball Stud (Silver) (6)

Team Associated .200" Ball Stud (Silver) (6)

$ 6.99 Save $ 0.01

This is a pack of six replacement .200 silver ball studs for the RC10GT2 1/10th scale off-road truck. These ball studs are used on the servo horn to attach the steering linkage to the servo.

Team Associated Input Shaft Hardware Set

Team Associated Input Shaft Hardware Set

$ 5.99 Save $ 0.01

This is a replacement Team Associated Input Shaft Hardware Set. This set includes three e-clips, one c-clip and five pins.

Team Associated Transmission Shim Set

Team Associated Transmission Shim Set

$ 4.99 Save $ 0.01

This is a replacement transmission shim set from Team Associated.

**DISCONTINUED**Team Associated Pull Start One-Way Bearing (AE .21/4.60)

**DISCONTINUED**Team Associated Pull Start One-Way Bearing (AE .21/4.60)

$ 16.75 Save $ 0.25

This is a replacement Team Associated Pull Start One-Way Bearing, and is intended for use with the Team Associated MGT and MGT4.6 Monster Trucks. This one-way bearing is used in the pull start assembly. Compatibility: Team Associated MGT

Kyosho Aluminum Steering Plate (Gunmetal)

Kyosho Aluminum Steering Plate (Gunmetal)

$ 21.50 Save $ 1.50

  This is an optional Kyosho Aluminum Steering Plate, and is intended for use with the Kyosho Ultima RB6 1/10 scale buggy. This aluminum plate is anodized gunmetal and increases the reliability and durability of the steering rack, as well as increase the overall steering response.   Compatibility: Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT6

Kyosho Aluminum Rear/Inner Suspension Holder w/Inserts (Gunmetal) (FS2 SP)

Kyosho Aluminum Rear/Inner Suspension Holder w/Inserts (Gunmetal) (FS2 SP)

$ 25.99 Save $ 0.01

This is a replacement Kyosho Aluminum Rear/Inner Suspension Holder, and is intended for use with the Kyosho Lazer ZX5 FS2 SP. This suspension holder uses inserts to adjust the rear anti-squat settings, simplifying setup changes. A complete set of inserts are included. This is also an excellent upgrade part for the rest of the ZX5 family when a more durable suspension holder is needed.  Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6

Kyosho RB6.6 Aluminum Chassis

Kyosho RB6.6 Aluminum Chassis

$ 98.99 Save $ 27.00

Kyosho RB6.6 Aluminum Chassis. This is the replacement RB6.6 chassis.  Compatibility: Kyosho Ultima RB6.6

Kyosho Aluminum Front Suspension Mount Block (Type B)

Kyosho Aluminum Front Suspension Mount Block (Type B)

$ 21.50 Save $ 2.49

This is an optional Kyosho Aluminum Front Suspension Mount Block Type B. This block not only adds the durability of aluminum over plastic, but also adds 10g of weight. Use this block as a tuning aid and to maximize performance and durability.   Compatibility: Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT6 Kyosho Ultima SC6

Kyosho RB6 Aluminum Steering Crank Arm Set (Gunmetal) (2)

Kyosho RB6 Aluminum Steering Crank Arm Set (Gunmetal) (2)

$ 27.49 Save $ 0.51

This is an optional Kyosho Aluminum Steering Crank Arm Set, and is intended for use with the Kyosho RB6 1/10 2wd buggy. These steering crank arms are machined from high quality Japanese Aluminum, with Kyosho's impressive Gunmetal finish and have been developed to improve the overall steering feel as well as increase the reliability of the steering system.   Compatibility: Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT6

Hot Racing 1/10 Scale Aluminum Orange Tow Shackle D-Rings (4)

Hot Racing 1/10 Scale Aluminum Orange Tow Shackle D-Rings (4)

$ 13.88 Save $ 0.12

Hot Racing aluminum 1/10th scale orange tow shackles (D-rings) for the Axial SCX10 Jeep AX80125 front bumper, the AX80126 rear bumper, or other custom project FEATURES: - CNC machined aluminum construction- Orange anodizing for durability, corrosion resistance, and great looks- D-rings are essential for recovery efforts and ultimate scale looks- Recessed counter bore to hide screw head YOU WILL RECEIVE: - Four (4) aluminum tow shackles- Four (4) socket head cap screws REQUIREMENTS: - Installation on vehicle SPECIFICATIONS: - Length:...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (36T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (36T)

$ 6.49 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Mini Pinion 2mm Steel .5 Mod 15T RRP1815

Robinson Racing Mini Pinion 2mm Steel .5 Mod 15T RRP1815

$ 5.99 Save $ 0.01

This is the Robinson Racing 15 tooth .5 mod mini pinion gear. Features: Steel construction with blackened finish for high strength and durability Includes: 15 Tooth .5 Mod Mini Pinion Gear and 3mm Set Screw Specs: Number of Teeth: 15 Hole Diameter: 2mm Gear Pitch: .5

Robinson Racing Mini Pinion 2mm Steel .5 Mod 13T RRP1813

Robinson Racing Mini Pinion 2mm Steel .5 Mod 13T RRP1813

$ 5.99 Save $ 0.01

This is the Robinson Racing 13 tooth .5 mod mini pinion gear. Features: Steel construction with blackened finish for high strength and durability Includes: 13 Tooth .5 Mod Mini Pinion Gear and 3mm Set Screw Specs: Number of Teeth: 13 Hole Diameter: 2mm Gear Pitch: 0.5

AVID RC 10th Wing Mount Buttons | Green

AVID RC 10th Wing Mount Buttons | Green

$ 8.50

AV1600-GRN 10th Wing Mount Buttons were designed after the success of our 8th scale wing button. 10th scale doesn't require quite the all out nature of the 8th line so we removed the serrations (not doing 45 minute mains here or getting pounded on by other 8lb cars) and for the sake of a different look we counter sunk the screw hole to get that low profile design. We did keep the contact surface the same as the 8th Wing...

Robinson Racing Steel 48P Pinion Gear (3.17mm Bore) (32T)

Robinson Racing Steel 48P Pinion Gear (3.17mm Bore) (32T)

$ 4.69 Save $ 0.30

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.