RC Car & Truck Parts
Losi Mod 1 Plastic Spur Gear (8E 2.0) (45T)
This Losi Mod 1 Plastic Spur Gear is intended for use with the Losi 8IGHT-E series vehicles. These spur gears are made of highly durable plastic that has been specifically designed for the rigors of 1/8-scale electric buggy and truggy racing. Plastic Spur Gears help to make the car quieter, but require a more precise mesh setting. Spur gear includes a steel insert for improved overall strength and longevity, and the steel insert stays on the center differential when the...
Losi Front Bumper Set
This is a replacement Losi Front Bumper Set, and is intended for use with the Losi TEN-SCTE. Compatibility: LOSI TEN-SCT NITRO LOSI TEN-SCTE LOSI TEN-SCTE 2.0 LOSI TEN-SCTE 3.0
Tekno RC Battery Strap (Black) (3)
This is a pack of two replacement Tekno RC Black Battery Straps. These battery straps are included in the Tekno RC Brushless Conversion for the Traxxas Revo, but they are also very useful for do-it-yourself conversions using the Tekno RC Battery Tray for Revo. They can also be used for any application calling for these lengths of strap. These straps are ‘cinch’ straps and wrap around on themselves for superior holding power and durability without relying on grommets or screws...
Traxxas Steering Blocks (2) (VXL)
This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles. Compatibility: TRAXXAS BANDIT TRAXXAS NITRO SLASH TRAXXAS RUSTLER TRAXXAS SLASH TRAXXAS STAMPEDE
RPM Traxxas Slash Rear A-Arms (Black) (2)
This is a set of two rear RPM rear A-arms for the Traxxas Slash and are designed specifically for the Slash – they are not multi-platform A-arms like the stock versions. RPM's first design challenge was to beef up thier version of the Slash rear A-arms to handle serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! They then eliminated all of the unnecessary holes and shock mounts that would be needed...
Traxxas 4mm Steel Flanged Serrated Nylon Locknut (8)
This is a pack of eight 4mm nylon locking nuts from Traxxas.
Tekno RC Aluminum Single Sided Clamping Servo Horn (25T)
This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune...
Tekno RC Composite Spur Gear (44T)
This is an optional Tekno RC 44 Tooth Composite Spur Gear. This black composite spur gear is for your EB48 or SCT410. This spur gear will completely black out your kit making your vehicle look more sleek than ever. Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC MT410 Tekno RC SCT410 Tekno RC SCT410.3
Losi Shock Rebuild Set (2) (Ten-T)
This is a replacement Losi Shock Rebuild Set, and is intended for use with the Losi Ten-T truck. This rebuild set includes all the hardware needed to rebuild two shocks. Compatibility: LOSI 810 LOSI TEN RALLY LOSI TEN-SCBE LOSI TEN-SCT NITRO LOSI TEN-SCTE LOSI TEN-SCTE 2.0 LOSI TEN-T
RPM Slash 4x4 Rear Bearing Carrier Set (2)
This is a optional RPM Rear Bearing Carrier Set, and are intended for use with the Traxxas Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! The newest muscle-laden product from RPM is a rear bearing carrier for the Slash 4x4. The stock version simply can’t handle Short Course carnage like RPM products can. The RPM version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the...
Team Losi Racing Front & Rear Gear Box Set
This is a replacement Team Losi Racing 8IGHT Front & Rear Gear Box Set. These updated gear boxes are compatible with the Losi 8IGHT family of vehicles, and have been molded from a stiffer material to deliver a more consistent gear mesh under load. Package includes front and rear front gear box halves, front and rear rear gear box halves, and rear gear box bearing inserts. Compatibility: Losi 8IGHT Losi 8IGHT 2.0 Losi 8IGHT 3.0 Losi 8IGHT RTR Losi 8IGHT-E...
Mugen Seiki Mod 1 Pinion Gear (14T)
Mugen Mod 1 Pinion Gear. These pinion gears are available in a variety of tooth count options to get the gear ratio of your ECO vehicle dialed for any track condition. Compatibility: Mugen MBX6E ECO Mugen MBX6T Mugen MBX7R ECO Mugen MBX7TE Mugen MBX7TR ECO Mugen MBX8 ECO Mugen MBX8TE
Team Associated B64 Front/Rear Gearbox
Team Associated B64 Front/Rear Gearbox. This is the standard replacement gearbox housing for the B64D buggy. Package includes one housing that can be used in either the front or rear position.
Team Associated Front Arm Set
This is a replacement Team Associated Front Arm Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right side arm, as well as two plastic arm spacers. These arms are directional! Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e
Traxxas Suspension Arm (2)
This is a pack of two replacement Traxxas Suspension Arms. These arms are used in the front and rear positions, as well as the left and right side. Compatibility: TRAXXAS TELLURIDE 4X4
Tekno RC EB410/ET410 Front & Rear Bulkhead Set (Revised)
This is the "Revised" Tekno EB410 Bulkhead Set. The front bulkhead in this set has been strengthened to reduce fatigue from extreme impacts. This TKR6519B Bulkhead Set is a direct replacement for the original TKR6519 and does not require additional parts or hardware. Includes: One front bulkhead with cover and one rear bulkhead with cover. Compatibility: TEKNO RC EB410 TEKNO RC ET410
Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (12T)
Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...
Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (16T)
Robinson Racing 48 Pitch "Aluminum Pro" Pinion Gears are machined from aircraft aluminum, lightened and double coated with a super hard, black anodized finish. These gears are a perfect choice for onroad, and spec off road as well, and are available in a variety of tooth count options to fine tune torque and top speed of your model. Package includes one gear and one 5-40 set screw.
Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T)
Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos Compatibility: TEAM ASSOCIATED RC10 B6 TEAM ASSOCIATED RC10 B6.1 TEAM ASSOCIATED RC10 B6 FACTORY LITE TEAM ASSOCIATED RC10 B6.1D TEAM ASSOCIATED RC10 B6D TEAM ASSOCIATED RC10 SC6.1
Mugen Seiki Complete Bushing Set
This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle. Compatibility: Mugen MBX7 Mugen MBX7E ECO Mugen MBX7R Mugen MBX7R ECO Mugen MBX7T Mugen MBX7TE Mugen MBX7TR Mugen MBX7TR ECO Mugen MBX8 Mugen MBX8 ECO Mugen MBX8T Mugen MBX8TE Mugen MGT7 Mugen MGT7E
Team Associated Front Upper Arm Set w/Caster Inserts
This is a replacement Team Associated Front Upper Arm Set, intended for use with the Team Associated RC8B3 Nitro Buggy. This set includes one left and one right side arm, plus upper hinge pin inserts that allow the caster to be adjusted by moving the upper arm back and forth. Note: These arms are directional, with a right and left side. Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e
Traxxas Complete Slipper Clutch
This is a replacement Traxxas Complete Slipper Clutch, and is intended for use with the Traxxas Stampede 4x4 1/10 scale truck. This slipper clutch is fully assembled and can be dropped right in the truck for a quick and easy installation. Compatibility: TRAXXAS RALLY TRAXXAS SLASH 4X4 TRAXXAS SLASH 4X4 ULTIMATE TRAXXAS STAMPEDE 4X4 TRAXXAS TELLURIDE 4X4
Traxxas Body Clips (Black) (12)
This is a pack of twelve Traxxas Black Body Clips. These clips are ideal for 1/10 scale use. Compatibility: TRAXXAS TRX-4
Traxxas 48P Spur Gear (83T)
Traxxas offers a complete selection of 48-pitch spur gears for performance tuning. Compatibility: Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede Traxxas Telluride 4x4
ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2)
This is a pack of two ProTek R/C "High Temp" 1/8 Scale Silicone Exhaust Manifold Gaskets. These are the gaskets supplied with the Samurai 321B engine and tuned pipes. These high temp gaskets are perfect for nitro competition or heavy use. The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time...
Novarossi Complete Buggy Clutch
This is an optional Novarossi Buggy Clutch. The four shoes clutch was conceived, designed and built by Novarossi in order to provide increased traction, increased lifetime, reduce fuel consumption and the most efficient power transmission possible. The clutch comes stock with an aluminum and CFM (Controlled Friction Material) shoe combination on 1.0mm springs. Optional springs are available, as the clutch is completely tunable. Optional clutch bells and shoe offerings are also available for fine tuning clutch response for nearly any...
Losi Front Spindles & Carriers (Ten-T)
This is a set of replacement Losi Front Steering Spindles & Carriers, and are intended for use with the Losi Ten-T truck. The Spindle Carriers attach to the suspension arm at the outer hinge pin, and is secured in place by the front upper camber link. The Steering Spindles are attached to the spindle carrier allowing steering inputs to be transferred to the steering spindle by the steering link. The steering spindles also carry the front axles and support the...
Mugen Seiki Plastic Mod1 Spur Gear (46T)
Compatibility: Mugen MBX6E ECO Mugen MBX6T Mugen MBX7R ECO Mugen MBX7TE Mugen MBX7TR ECO This Mugen Plastic Mod1 Spur Gear is available in 46 (stock), or 44 tooth count options to fine tune the gear ratio of your MBX electric vehicle. Effects of Spur Gear Changes Gear Effects Larger Spur Increased acceleration Decreased top speed Use on smaller tracks for more punch Use with larger pinion to get more overall torque, while maintaining the same gear ratio Smaller Spur...
Team Associated Wing Mount
This is a replacement Team Associated Wing Mount. Like the Hot Bodies D815, this is a 1-piece wing mount which will be very lightweight. Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e Team Associated RC8T3 Team Associated RC8T3.1 Team Associated RC8T3.1e Team Associated RC8T3e
Team Associated Rear Buggy Arm Set
This is a replacement Team Associated Rear Arm Set, intended for use with the RC8B3 Nitro Buggy. This package also includes plastic arm shims. Compatibility: TEAM ASSOCIATED RC8B3 TEAM ASSOCIATED RC8B3.1 TEAM ASSOCIATED RC8B31.E TEAM ASSOCIATED RC8B3E
Losi Mod1 Spur Gear (40T)
This is a replacement Losi Mod1, 40 tooth Spur Gear, and is intended for use with the Losi TEN-SCTE. Losi TEN Rally X Losi TEN-SCBE Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-SCTE 3.0
Team Associated B64D 4WD Buggy Body (Clear)
This is a replacement Team Associated Clear 4WD Buggy Body for the B64D Buggy. This body is clear, untrimmed and includes window masks. For the optional "Lightweight" B64D body, see part# ASC92088. Compatibility: Team Associated RC10 B64 Team Associated RC10 B64D
Tekno RC 1/8 High Down Force Buggy Wing (ROAR/IFMAR Legal) (White)
This Tekno RC 1/8 High Down Force Buggy Wing is white color and is ROAR/IFMAR approved. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking. This item replaces: TKR5037 – Wing (white) Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC...
ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)
This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...
Traxxas Body Clips (angled, 90-degrees) (10)
This is a pack of 10 small size body clips for Traxxas vehicles, such as the Traxxas Revo. These are the really small clips used to clip the radio tray assembly together and hold on the fuel tank. Compatibility: TRAXXAS NITRO SLASH TRAXXAS RALLY TRAXXAS REVO TRAXXAS RUSTLER 4X4 TRAXXAS SLASH TRAXXAS SLASH 4X4 TRAXXAS SLASH 4X4 ULTIMATE TRAXXAS STAMPEDE 4X4 TRAXXAS TELLURIDE 4X4
Traxxas 54T Spur Gear (0.8 Metric Pitch)
This is a replacement 54T (0.8 Metric Pitch) spur gear from Traxxas. This gear mounts to the input shaft of the transmission, and meshes with the pinion gear on the clutch bell. Compatibility: TRAXXAS JATO TRAXXAS RALLY TRAXXAS RUSTLER 4X4 TRAXXAS S-MAXX TRAXXAS SLASH 4X4 TRAXXAS SLASH 4X4 ULTIMATE TRAXXAS STAMPEDE 4X4 TRAXXAS T-MAXX
Tekno RC Inner Hinge Pin Set (2)
This is a replacement Tekno RC Inner Hinge Pin Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. This package includes two inner hinge pins that can be used in both the front and rear position. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC...
Tekno RC Rear Angled Gearbox
This is the optional Tekno RC is proud to announce a redesigned rear gearbox option for the EB48 and SCT410 (TKR5016B). This gearbox is slightly angled upward to minimize the drive angles and increase efficiency. Furthermore, this helps to reduce wear on the driveshaft for increased longevity. This gearbox requires the use of larger 5x13x4mm pinion support bearings. This has been done to increase durability (TKRBB05134). Compatibility: TEKNO RC EB48 TEKNO RC EB48.2 TEKNO RC EB48.3 TEKNO RC EB48.4...
Team Associated 30.5mm Front Shock Shaft (2)
This is a pack of two replacement Team Associated 30.5mm Front Shock Shafts, intended for use on the front shocks of the RC8B3 Nitro Buggy. Compatibility: Team Associated RC8B3 Team Associated RC8B3.1 Team Associated RC8B3.1e Team Associated RC8B3e
ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot)
This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug. Some things to keep in mind: The smaller the engine, the hotter the plug. The higher the...
Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2)
This is a replacement Team Associated 7mm Clamping Wheel Hex Set, intended for use with the RC10 B5M Factory Lite kit. These hexes can be used optionally with the T5M to produce the stock offset. Additionally, these hexes can also be used with the B5 and B5M but will produce a larger offset. Package includes two 7.0mm clamping hexes, two cross pins and two cap head screws. Note: Requires the use of the optional Team Associated HD Rear CVA Axle (ASC71019). ...