RC Car & Truck Parts

RC Car & Truck Parts



Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (14T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (14T) **

$ 12.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (15T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (15T) **

$ 12.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (16T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (16T) **

$ 11.99 Save $ 2.00

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC Battery Strap (Black) (3) **

Tekno RC Battery Strap (Black) (3) **

$ 14.00

This is a pack of two replacement Tekno RC Black Battery Straps. These battery straps are included in the Tekno RC Brushless Conversion for the Traxxas Revo, but they are also very useful for do-it-yourself conversions using the Tekno RC Battery Tray for Revo. They can also be used for any application calling for these lengths of strap. These straps are ‘cinch’ straps and wrap around on themselves for superior holding power and durability without relying on grommets or screws...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (17T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (17T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (13T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (13T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) **

$ 15.25 Save $ 0.74

This is the Tekno RC Aluminum Single Sided Clamping Servo Horn for 25 tooth servo splines; such as Futaba, Savox and ProTek R/C. This Tekno RC Aluminum Servo Horn is designed to minimize forces transmitted back to the servo spline. The horn utilizes a bottom mount design that, as opposed to a top mount, lowers the leverage point. This means your servo will be protected better to keep you in the race. There are two mounting positions to fine tune...

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (18T) **

Tekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (18T) **

$ 11.99

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it...

Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace **

Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace **

$ 22.99 Save $ 2.00

This is a replacement Tekno RC Aluminum V2 "A" Block Adjustable Hinge Pin Brace. The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently adjust kickup, sweep, toe, and anti-squat as well as front and rear roll centers. The V2 system requires TKR5165 square inserts. Each block is available separately to keep replacement costs down. Each block is CNC machined from 7075 aluminum then...

Tekno RC Composite Spur Gear (44T) **

Tekno RC Composite Spur Gear (44T) **

$ 7.40 Save $ 0.59

This is an optional Tekno RC 44 Tooth Composite Spur Gear. This black composite spur gear is for your EB48 or SCT410. This spur gear will completely black out your kit making your vehicle look more sleek than ever.   Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC MT410 Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC EB410/ET410 Front & Rear Bulkhead Set (Revised) **

Tekno RC EB410/ET410 Front & Rear Bulkhead Set (Revised) **

$ 23.00 Save $ 1.99

This is the "Revised" Tekno EB410 Bulkhead Set. The front bulkhead in this set has been strengthened to reduce fatigue from extreme impacts. This TKR6519B Bulkhead Set is a direct replacement for the original TKR6519 and does not require additional parts or hardware. Includes:  One front bulkhead with cover and one rear bulkhead with cover. Compatibility: Tekno RC EB410 Tekno RC ET410

Tekno RC V2 Hinge Pin Inserts/Wheelbase Shim Set

Tekno RC V2 Hinge Pin Inserts/Wheelbase Shim Set

$ 9.99

This is a replacement Tekno RC V2 Hinge Pin Inserts/Wheelbase Shim Set. These are the hinge pin inserts for use with TKR5161, TKR5162, TKR5163, and TKR5164. They are also used with TKR5730. They are standard on the SCT410.3 and EB48SL and are 100% compatible with the EB/NB/ET/NT48 as well as the original SCT410 as long as you have the V2 hinge pin braces. Includes: (8) center dot  (4) 1mm center offset  (4) .5mm center offset  (4) 1mm corner offset  (4)...

Tekno RC Rear Shock Shaft Set (2) **

Tekno RC Rear Shock Shaft Set (2) **

$ 9.99

This is a replacement Tekno RC Rear Shock Shaft Set, and is intended for use with the Tekno RC EB48 1/8 scale buggy. This set includes two steel shock shafts.  Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC NT48.3 Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC Inner Hinge Pin Set (2) **

Tekno RC Inner Hinge Pin Set (2) **

$ 10.50

This is a replacement Tekno RC Inner Hinge Pin Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. This package includes two inner hinge pins that can be used in both the front and rear position. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC...

Tekno RC Rear Angled Gearbox **

Tekno RC Rear Angled Gearbox **

$ 13.75 Save $ 0.24

This is the optional Tekno RC is proud to announce a redesigned rear gearbox option for the EB48 and SCT410 (TKR5016B). This gearbox is slightly angled upward to minimize the drive angles and increase efficiency. Furthermore, this helps to reduce wear on the driveshaft for increased longevity. This gearbox requires the use of larger 5x13x4mm pinion support bearings. This has been done to increase durability (TKRBB05134).    Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4...

Tekno RC Serrated Wheel Nut Set (Gun Metal) (4) **

Tekno RC Serrated Wheel Nut Set (Gun Metal) (4) **

$ 14.99

This is a replacement Tekno RC Serrated Wheel Nut Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC NT48.3

Tekno RC 1/8 High Down Force Buggy Wing (ROAR/IFMAR Legal) (Black) **

Tekno RC 1/8 High Down Force Buggy Wing (ROAR/IFMAR Legal) (Black) **

$ 14.99

This Tekno RC 1/8 High Down Force Buggy Wing is Black color and is ROAR/IFMAR legal. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking. This item replaces: TKR5037B – Wing (black) Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48SL Tekno RC ET48 Tekno RC...

Tekno RC M5 Aluminum Serrated Flanged Locknut (Black) (4) **

Tekno RC M5 Aluminum Serrated Flanged Locknut (Black) (4) **

$ 8.99

This is a pack of four replacement Tekno RC M5 Serrated Flanged Locknuts. These are used with TKR5570B M5 threaded stub axles for the SCT410, but can also be used anywhere an M5 serrated locknut is required. These nuts will ensure your wheels stay on your vehicle. M4 serrated locknuts simply can’t compare and can strip or come loose much easier than an M5 nut. Features:      Massive M5 thread and serrated back ensures your wheels will stay on    ...

Tekno RC EB410 Composite Spur Gear (81T) **

Tekno RC EB410 Composite Spur Gear (81T) **

$ 7.99

Tekno RC EB410 Composite Spur Gear. This is the replacement 81 tooth spur gear for the Tekno EB410 4wd buggy. Package includes one spur gear.  Compatibility: Tekno RC EB410

Tekno RC CV Rebuild Kit **

Tekno RC CV Rebuild Kit **

$ 6.99

This is a replacement Tekno RC CV Rebuild Kit, and is intended for use with the Traxxas Slash, Slash 4x4, Losi SCTE, Ten-T and 810 vehicles equipped with the optional Tekno RC M6 Driveshafts. This kit includes two barrels and two pins and will work with the following Tekno RC Driveshaft Sets; TKR6851X, TKR6852X, TKR1951X and TKR2210X.  Compatibility: Losi 810 Losi TEN-SCTE Losi TEN-SCTE 2.0 Losi TEN-T Tekno RC EB410 Tekno RC EB48SL Tekno RC ET410 Traxxas Slash Traxxas Slash...

Tekno RC Shock Cap Bushing (4) **

Tekno RC Shock Cap Bushing (4) **

$ 3.99

This is a pack of four optional Tekno RC Shock Bushings, allowing you to replace the bushings on all four shocks at the same time. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC NT48.3 Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC EB410/ET410 Front/Rear Inner Hinge Pins (2) **

Tekno RC EB410/ET410 Front/Rear Inner Hinge Pins (2) **

$ 7.99

Tekno RC EB410 Front/Rear Inner Hinge Pins. This is a replacement for the Tekno EB410 4wd buggy. Package includes two hinge pins  Compatibility: Tekno RC EB410 Tekno RC ET410

Tekno RC Differential Seals (3) **

Tekno RC Differential Seals (3) **

$ 4.00

This is a pack of three replacement Tekno RC Differential Seals, and are intended for use with the Tekno RC EB48 1/8 electric buggy. These gaskets are installed between the ring gear and the differential cup and are used to seal the differentials. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48...

Tekno RC Front Gearbox **

Tekno RC Front Gearbox **

$ 13.75 Save $ 0.24

This is a replacement Tekno RC Front Gearbox, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. NOTE: The front and rear of the car use different inner bulkheads. The front is angled and cannot be used in the rear position.  Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC...

Tekno RC EB410 Aluminum Servo Horn (25T) **

Tekno RC EB410 Aluminum Servo Horn (25T) **

$ 16.76 Save $ 1.23

Tekno EB410 Aluminum Servo Horn. This low profile clamping style 25T horn uses M3 clamp screws and is a must have EB410 upgrade. Compatibility: Tekno RC EB410 Tekno RC ET410

Tekno RC Differential Case **

Tekno RC Differential Case **

$ 7.99

This is a replacement Tekno RC Differential Case, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. This differential case can be used in the front, center or rear position. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC NT48.3 Tekno RC SCT410 Tekno RC SCT410.3...

Tekno RC Captured Shock Boot Set (2) (Long) **

Tekno RC Captured Shock Boot Set (2) (Long) **

$ 4.99

This is an optional Tekno RC Long Length Captured Shock Boot Set. These shock boots are only compatible with the optional Tekno RC Locking Spring Perches (TKR6140)! These shock boots feature a captured design that will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They allow the suspension to remain free and consistent without sacrificing up travel. They are a perfect length fit for their respective shock lengths and won’t be caught or...

Tekno RC Rear Steel X-Long Shock Shafts (2) **

Tekno RC Rear Steel X-Long Shock Shafts (2) **

$ 11.99

This is a pack of two replacement Tekno RC Rear Steel X-Long Shock Shafts.  Compatibility: Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48 Tekno RC NT48.3

Tekno RC Body Mount Set **

Tekno RC Body Mount Set **

$ 9.99

This is a replacement Tekno RC Body Mount Set, and is intended for use with the Tekno RC SCT410 4wd Short Course Truck. Compatibility: Tekno RC MT410 Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC Aluminum Vented Shock Cap Set (Gun Metal) (2) **

Tekno RC Aluminum Vented Shock Cap Set (Gun Metal) (2) **

$ 19.99

This is a replacement Tekno RC Aluminum Shock Cap Set, and is intended for use with the Tekno R/C EB, ET, NB, NT and SCT series vehicles. "Vented" refers to the small hole on the top of the cap inside the shock mount eyelet. Package includes two shock caps that can be used on either the front or rear shocks. With any bladder shock setup, the bladder is used to compensate for the volume displacement of the shaft moving in...

Tekno RC Differential O-Rings (6) **

Tekno RC Differential O-Rings (6) **

$ 3.99

This is a pack of six replacement Tekno RC Differential O-Rings, and are intended for use with the Tekno RC EB48 1/8 electric buggy. These o-rings are installed in the differential cups and seal the differentials at the outdrives. Compatibility: Tekno RC EB410 Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET410 Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno...

Tekno RC 5.8mm Rod Ends (8) **

Tekno RC 5.8mm Rod Ends (8) **

$ 9.99 Save $ 3.01

This is a pack of eight replacement Tekno RC 5.8mm Rod Ends, and are intended for use with the Tekno R/C EB48 electric 1/8 buggy. These rod ends are used to complete the steering links, as well as the steering servo linkage rod. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC NB48.4 Tekno RC NT48...

Tekno RC EB410/ET410 Rear Hubs **

Tekno RC EB410/ET410 Rear Hubs **

$ 9.99

Tekno EB410 Rear Hubs. Package includes two rear hubs.  Compatibility:  Tekno RC EB410 Tekno RC ET410

Tekno RC HD Center Driveshaft (SCTE - Rear/SCTE 2.0 - Front) **

Tekno RC HD Center Driveshaft (SCTE - Rear/SCTE 2.0 - Front) **

$ 19.99

This is an optional Tekno RC HD Center Driveshaft, intended for use with the Losi TEN-SCTE Series. This driveshaft is used in: Rear/Center on TEN-SCTE Front/Center on TEN-SCTE 2.0    One of the main weaknesses of the Losi SCTE, is the center driveshafts. The cheap stock material causes the barrel and pins to wear prematurely. Worse yet is when the pins eject while you're halfway through your main event! Tekno has engineered a set of center driveshafts and diff couplers...

Tekno RC HD Center Driveshaft (SCTE - Front/SCTE 2.0 - Rear) **

Tekno RC HD Center Driveshaft (SCTE - Front/SCTE 2.0 - Rear) **

$ 17.99 Save $ 1.00

This is an optional Tekno RC HD Center Driveshaft, intended for use with the Losi TEN-SCTE Series. This driveshaft is used in: Front/Center on TEN-SCTE Rear/Center on TEN-SCTE 2.0  One of the main weaknesses of the Losi SCTE, is the center driveshaft. The extreme angle and cheap stock material causes the barrel and pins to wear prematurely. Worse yet is when the pins eject while you're halfway through your main event! Tekno has engineered a set of center driveshafts and...

Tekno RC Steering Spindle Set **

Tekno RC Steering Spindle Set **

$ 9.99

This is the updated Tekno RC Steering Spindle Set. These spindles are the updated version of the TKR5541. They feature a larger outer bearing recess for use with TKRBB06135 bearings. The bearings increase durability in all conditions. These are also compatible with the original SCT410. The stock 10x15x4mm inner bearings are used. Note: TKR5541 has been discontinued. Compatibility: Tekno RC EB48SL Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC Hardened Steel CVD Driveshaft Set (2) **

Tekno RC Hardened Steel CVD Driveshaft Set (2) **

$ 17.99 Save $ 2.00

This is a replacement Tekno RC Hardened Steel CVD Driveshaft Set, and is intended for use with the Tekno RC SCT410 4wd Short Course Truck. Package includes two CVD driveshafts that can be used in the front or rear position. Compatibility: Tekno RC EB48SL Tekno RC SCT410 Tekno RC SCT410.3

Tekno RC EB410 Turnbuckle, Sway Bar & Steering Rod End Set **

Tekno RC EB410 Turnbuckle, Sway Bar & Steering Rod End Set **

$ 9.99

This is a replacement Tekno RC Turnbuckle, Sway Bar and Steering Rod End Set. Compatibility:  Tekno RC EB410 Tekno RC ET410

Tekno RC SCT410.3 Front Bumper Set (Revised w/Skid) **

Tekno RC SCT410.3 Front Bumper Set (Revised w/Skid) **

$ 13.75 Save $ 0.24

Back by popular demand, the front skid plate has returned to the SCT bumper! This change brings increased durability and chassis protection to the front of your truck. For those that would prefer the added ground clearance, the skid can be easily removed. It is fully compatible with all versions of our short course trucks and requires one TKR1522 (M3x8mm cap head screw) and two TKR1346 (M4x15mm Flat Head Screw). Compatibility:  Tekno RC MT410 Tekno RC SCT410 Tekno RC SCT410.3...

Tekno RC Hardened Steel Driveshaft Set (2) **

Tekno RC Hardened Steel Driveshaft Set (2) **

$ 17.99 Save $ 2.00

This is a replacement Tekno RC Hardened Steel Driveshaft Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. These driveshafts can be used in either the front or rear position. Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC NB48 Tekno RC NB48.3

Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set (4) **

Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set (4) **

$ 17.99 Save $ 2.00

This is an optional Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set. These aluminum 12mm hex adapters are intended for use with the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC wheels. They have a 6mm inner bore to fit the M6 Stub Axles and may be used on other 6mm axle applications where applicable. Features:  Hard anodized CNC machined aluminum construction Set screw to avoid losing drive pins Ultimate durability Lightweight design Compatible with...

Tekno RC M3 Flanged Locknut (10) **

Tekno RC M3 Flanged Locknut (10) **

$ 5.99

This is a pack of ten replacement Tekno RC M3 Flanged Lock Nuts, and are intended for use with the Tekno R/C EB48 electric 1/8 buggy. These nuts are used to secure the front and rear shocks to the shock standoffs.  Compatibility: Tekno RC EB410 Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC ET410 Tekno RC ET48 Tekno RC ET48.3 Tekno RC MT410 Tekno RC NB48 Tekno RC NB48.3 Tekno RC...

Tekno RC M4 Aluminum Serrated Locknut (4) (Gun Metal) **

Tekno RC M4 Aluminum Serrated Locknut (4) (Gun Metal) **

$ 7.99

This is a pack of four replacement Tekno RC M4 Aluminum Serrated Locknuts, and are intended for use with the Tekno RC SCT410 4wd Short Course Truck.  Compatibility:  Tekno RC ET410 Tekno RC SCT410

Tekno RC EB410/ET410 Wheelbase Shims & Hinge Pin Inserts **

Tekno RC EB410/ET410 Wheelbase Shims & Hinge Pin Inserts **

$ 9.99

Tekno RC EB410 Wheelbase Shims & Hinge Pin Inserts. This is a replacement for the Tekno EB410 4wd buggy. Package includes four sets of hinge pin block inserts and shims.  Compatibility: Tekno RC EB410 Tekno RC ET410

Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150) **

Tekno RC Aluminum Differential Cross Pin (6) (Used w/TKR5150) **

$ 15.25 Save $ 0.74

This is a pack of six optional Tekno RC Aluminum Differential Cross Pins intended for use with the TKR5150. These pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR5150 to be compatible in the EB48. These new Pins are bigger in diameter, making the ends of the Pins flat so there is more contact area in the differential case. This helps eliminate wear on the case and produces a...