RC Car & Truck Parts

RC Car & Truck Parts



RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash)

RPM Traxxas Rear Bearing Carriers (Rustler,Stampede,Bandit,Slash)

$ 8.99

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend...

RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)

RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)

$ 11.99 Save $ 0.01

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!  Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off...

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2)

RPM Caster Block 30 Deg (Rustler,Stampede,Bandit,Slash) (2)

$ 9.99 Save $ 0.01

RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle. RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons...

RPM Front Bearing Carrier Set

RPM Front Bearing Carrier Set

$ 8.99 Save $ 0.01

This is an optional RPM Front Bearing Carrier Set, and is intended for use with the Traxxas Electric Rustler, Electric Stampede, Bandit and Slash 1/10 vehicles. When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version....

RPM Slash 4x4 Rear Bearing Carrier Set (2)

RPM Slash 4x4 Rear Bearing Carrier Set (2)

$ 10.99 Save $ 0.01

This is a optional RPM Rear Bearing Carrier Set, and are intended for use with the Traxxas Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII! The newest muscle-laden product from RPM is a rear bearing carrier for the Slash 4x4. The stock version simply can’t handle Short Course carnage like RPM products can. The RPM version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the...

RPM Traxxas 2WD Front Bulkhead (Black)

RPM Traxxas 2WD Front Bulkhead (Black)

$ 11.99 Save $ 0.01

The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. RPM also cored out the bottom of...

RPM Offset-Compensating Front A-Arm (Black)

RPM Offset-Compensating Front A-Arm (Black)

$ 10.99 Save $ 0.01

This is a pack of two optional RPM Offset-Compensating Front A-Arms, in Black color. If you’re anything like we are, keeping track of which offset wheel you have lying around for your Traxxas Slash 2wd or Nitro Slash and whether or not the wheel / tire has a front or rear offset can be a bit annoying. This is especially noticeable in the heat of the moment when you’re between race heats and need to slap something on the truck...

RPM Adjustable Body Mount Set (Slash 4x4)

RPM Adjustable Body Mount Set (Slash 4x4)

$ 9.99 Save $ 0.01

This is an optional RPM Adjustable Body Mount Set, and is intended for use with the Traxxas Slash 4x4. These Body Mounts for the Traxxas Slash 4x4 have been designed to provide optional body height positions, where stock left you none. This version of the Slash 4x4 body mount starts off lower than stock by 1/8” (or approx. 3.2mm). A pair of molded spacers are provided to allow the option of stock body height using the thin spacer under the...

RPM Traxxas Slash 4x4 Front Bumper & Skid Plate (Black)

RPM Traxxas Slash 4x4 Front Bumper & Skid Plate (Black)

$ 15.25 Save $ 0.70

RPM's three-piece front bumper / skid plate design for the Traxxas 4x4 is simple, yet strong, effective and highly attractive. It is made with a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a...

RPM REAR Shock Tower

RPM REAR Shock Tower

$ 10.99

This is an optional RPM Shock Tower, and is intended for use with the Traxxas Slash 4x4 and 1/10 scale Rally. For the Slash 4x4 this is a rear shock tower. On the Rally, this is a front and rear tower requiring two packages to fully outfit the vehicle. RPM shock towers are designed to take some serious abuse without failing, because nothing is worse than having a part break when you’re out having a fun day, whether it’s at...

RPM Rear Shock Tower

RPM Rear Shock Tower

$ 8.99 Save $ 0.01

This is a optional RPM Rear Shock Tower, and is intended for use with the Traxxas Rustler, Stampede, Bandit, and Slash 1/10 scale electric vehicles. These RPM rear shock towers were designed with one thing in mind – rugged durability. Once again, RPM has exceeded their own expectations with this shock tower. While they have maintained all stock geometry on these shock towers, They have beefed them up in all the right places to eliminate annoying rear shock tower breakage....

RPM Front Shock Tower (Rustler,Stampede,Bandit,Slash)

RPM Front Shock Tower (Rustler,Stampede,Bandit,Slash)

$ 7.99 Save $ 0.01

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this vital suspension component. Our design uses an I-beam structure that adds tremendous levels of strength and rigidity that is far superior to u-shaped or flat designs. Our front shock towers will not flex nearly as easily as the stock versions yet...

RPM Traxxas 4x4 Caster & Spindle Block Set (Black)

RPM Traxxas 4x4 Caster & Spindle Block Set (Black)

$ 17.99 Save $ 1.96

This is an optional RPM Traxxas 4x4 Caster & Spindle Block Set. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the call with these Caster & Steering Blocks for these awesome Traxxas trucks. Starting with a blank slate, drew in the necessary design elements and developed a design with a focus on punishment survivability. The core design...

RPM Traxxas Rustler/Stampede Wide Front Bumper (Black)

RPM Traxxas Rustler/Stampede Wide Front Bumper (Black)

$ 6.99 Save $ 0.01

This is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with...

RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue)

RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue)

$ 11.99

They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!  Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off...