RC Car & Truck Parts

RC Car & Truck Parts



Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (23T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (23T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (16T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (16T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Absolute 32P Hardened Pinion Gear (15T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (15T) **

$ 5.49 Save $ 0.51

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (20T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (20T) **

$ 5.49 Save $ 0.51

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Extra Hard 14T Blackened Steel 32P Pinion 5mm **

Robinson Racing Extra Hard 14T Blackened Steel 32P Pinion 5mm **

$ 12.49

Manufacturer Description This is the Extra Hard 14 Tooth 32 Pitch Blackened Finish Pinion Gearfrom Robinson Racing.FEATURES: Extra hard high carbon constructionFor use with the Robinson Racing GEN3 steel slipper unitsFits 5mm motor shaftINCLUDES: 14 Tooth 32 Pitch Blackened Finish Pinion Gear4mm Set ScrewBOX DIMENSIONS: 1.75" W. X .50" H. X 2.50" L.BOX WEIGHT: .02 LBS.

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (21T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (21T) **

$ 4.99 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (16T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (16T) **

$ 5.49

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Absolute 32P Hardened Pinion Gear (13T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (13T) **

$ 5.49

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing 48P Machined Pinion Gear (5mm Bore) (17T) **

Robinson Racing 48P Machined Pinion Gear (5mm Bore) (17T) **

$ 8.59

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (30T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (30T)

$ 5.29 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (19T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (19T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (15T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (15T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing 1/8" to 5mm Reducer Sleeve **

Robinson Racing 1/8" to 5mm Reducer Sleeve **

$ 4.89 Save $ 0.11

This is the Robinson Racing 1/8" to 5mm Reducer Sleeve. This sleeve will allow you to use 5mm bore pinion gears on motors that have an 1/8" shaft. Compatibility: Traxxas Slash 4x4

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (23T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (23T) **

$ 5.49 Save $ 0.51

Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (18T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (18T) **

$ 5.49

Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing 48P Machined Pinion Gear (5mm Bore) (21T)

Robinson Racing 48P Machined Pinion Gear (5mm Bore) (21T)

$ 8.59

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (15T) **

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (15T) **

$ 12.49

Robinson Racing Extra Hard Blackened Steel 32p Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. Can be run on motors using a 5mm motor shaft including Traxxas, Associated, and HPI models or for any heavy duty application....

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (26T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (26T) **

$ 4.99

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Absolute 32P Hardened Pinion Gear (11T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (11T) **

$ 5.49

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (3.17mm Bore) (26T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (3.17mm Bore) (26T) **

$ 5.49 Save $ 0.51

Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (16T) **

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (16T) **

$ 12.50

Robinson Racing Extra Hard Blackened Steel 32p Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. Can be run on motors using a 5mm motor shaft including Traxxas, Associated, and HPI models or for any heavy duty application....

Robinson Racing Absolute 32P Hardened Pinion Gear (12T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (12T) **

$ 5.49 Save $ 0.51

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (19T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (19T) **

$ 5.49

Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Absolute 32P Hardened Pinion Gear (16T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (16T) **

$ 5.49

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Absolute 32P Hardened Pinion Gear (14T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (14T) **

$ 5.49

PREMIUM HEAT TREATED "ABSOLUTE" STEEL PINIONSuper hard, heat treated, "Absolute" pinion gears are a must for using with our steel spur gears and will last and last if used with plastic spur gears. In sizes 9 through 23 teeth. All pinions stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (NOT INCLUDED) fits the 5/40 set screw.

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (17T) **

Robinson Racing Extra Hard Blackened Steel 32P Pinion Gear w/5mm Bore (17T) **

$ 12.50

Robinson Racing Extra Hard Blackened Steel 32p Pinion gears are built to last. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. Can be run on motors using a 5mm motor shaft including Traxxas, Associated, and HPI models or for any heavy duty application....

Robinson Racing Absolute 32P Hardened Pinion Gear (10T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (10T) **

$ 5.49

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (21T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (21T) **

$ 5.49

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (17T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (17T) **

$ 5.49

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing Absolute 32P Hardened Pinion Gear (18T) **

Robinson Racing Absolute 32P Hardened Pinion Gear (18T) **

$ 5.49

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing 5-40 Set Screws (6)

Robinson Racing 5-40 Set Screws (6)

$ 1.89 Save $ 0.01

This is a pack of six replacement 5-40 set screws for Robinson Racing pinion gears.

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (14T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (14T)

$ 4.99 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (33T) **

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (33T) **

$ 5.29

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Mini Pinion 2mm Steel .5 Mod 12T RRP1812

Robinson Racing Mini Pinion 2mm Steel .5 Mod 12T RRP1812

$ 5.99 Save $ 0.01

Manufacturer Description This is the Robinson Racing 12 Tooth .5 Mod Mini Pinion Gear.FEATURES: Steel construction with blackened finish for high strength and    durabilityINCLUDES: 12 Tooth .5 Mod Mini Pinion Gear3mm Set ScrewSPECS: Number of Teeth: 12Hole Diameter: 2mmGear Pitch: .5

Robinson Racing Hardened Steel Idler Gear

Robinson Racing Hardened Steel Idler Gear

$ 14.49 Save $ 0.01

This is an optional Robinson Racing Hardened Steel Idler Gear, and is intended for use with the Axial Wraith. This gear has been precision machined and hardened for the ultimate in reliability and performance.  Compatibility: Axial Wraith

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (37T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (37T)

$ 6.49 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (31T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (31T)

$ 5.29 Save $ 0.01

The "Pro" Pinions are precision machined from 7075 grade aluminum and anodized with a super hard jet black finish that not just hardends the surface but also protects the gear from corrosion and increases the lubricity by reducing friction and adhesion between the pinion gear and spur gear. Recommended for onroad, but they can be run off road. A wide selection of tooth sizes are available. Tooth number stamped on each pinion. 1/8 inch (3.17mm) bore. One 5-40 set screw...

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (3.17mm Bore) (27T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (3.17mm Bore) (27T) **

$ 5.49

Premium Heat Treated "ABSOLUTE" Steel Pinion Gears Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 23 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included.

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (28T) **

Robinson Racing Super Hard "Absolute" 48P Steel Pinion Gear (28T) **

$ 5.49 Save $ 0.51

Super hard, heat treated, "Absolute" pinion gears are a must for using with steel spur gears, and will last and last if used with plastic spur gears. Available in sizes 9 through 28 teeth. All pinions stamped with tooth number. 3.17mm (1/8") bore. One 5-40 set screw included. 

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (35T)

Robinson Racing "Aluminum Pro" 48P Pinion Gear (3.17mm Bore) (35T)

$ 5.29 Save $ 0.01

Robinson Racing 48 Pitch "Aluminum Pro" Pinion Gears are machined from aircraft aluminum, lightened and double coated with a super hard, black anodized finish. These gears are a perfect choice for onroad, and spec off road as well, and are available in a variety of tooth count options to fine tune torque and top speed of your model. Package includes one gear and one 5-40 set screw.