RC Car & Truck Parts

RC Car & Truck Parts



ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek)

ProTek RC Aluminum Servo Horn (Black) (25T-Futaba/Orion/Savox/ProTek)

$ 7.80 Save $ 0.20

This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features:  19mm hole spacing (measured from output shaft screw hole, to...

Options
ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T)

ProTek RC 4mm Aluminum Long Clamp Lock Servo Horn (Black) (25T)

$ 12.99 Save $ 0.01

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2)

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2)

$ 8.99 Save $ 0.01

This is a pack of two ProTek R/C "High Temp" 1/8 Scale Silicone Exhaust Manifold Gaskets. These are the gaskets supplied with the Samurai 321B engine and tuned pipes. These high temp gaskets are perfect for nitro competition or heavy use.   The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)

$ 12.99 Save $ 0.01

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot)

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot)

$ 7.99 Save $ 0.01

This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug. Some things to keep in mind: The smaller the engine, the hotter the plug. The higher the...

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (24T-Hitec)

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (24T-Hitec)

$ 11.99 Save $ 0.01

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 24 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances...

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (25T)

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (25T)

$ 14.25 Save $ 0.25

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum alloy and anodized black color. The horn has been machined to the exact specifications and dimensions of the plastic Team Associated ASC9180 servo horn, but provides the precision, rigidity and durability required for the latest generation of high-performance R/C vehicles. The horn also weighs a mere two grams while providing the insurance of the clamping design...

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines)

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines)

$ 6.99 Save $ 0.01

The ProTek T3 Ultra Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T3 "Ultra Hot" heat range plug is recommended for .12 to .21 size engines running 10 - 36% nitro in colder climates. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot" plug recommended for .12...

ProTek RC 1/10 Off-Road Buggy & Sedan Tire Mounting Glue Bands (4)

ProTek RC 1/10 Off-Road Buggy & Sedan Tire Mounting Glue Bands (4)

$ 8.99 Save $ 0.01

This is a set of four ProTek R/C 1/10 Scale Tire Mounting Bands. Too often a faulty glue bond can ruin a tire, as well as possibly damage the wheel and insert. This forces you to repair the tire, or worse...buy a new set of tires. With the aid of these Protek R/C Tire Mounting Bands, creating a tight consistent glue bond is easier than ever!   These mounting bands are ideal for 1/10 Off-Road Buggy and Sedan Tires and will help...

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Blue) (25T)

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Blue) (25T)

$ 14.25 Save $ 0.24

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum alloy and anodized blue color. The horn has been machined to the exact specifications and dimensions of the plastic Team Associated ASC9180 servo horn, but provides the precision, rigidity and durability required for the latest generation of high-performance R/C vehicles. The horn also weighs a mere two grams while providing the insurance of the clamping design...

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2)

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2)

$ 5.99 Save $ 0.01

  This is a set of two ProTek R/C Silicone Exhaust Manifold Gaskets, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time the gasket tends to lose it resiliency as it absorbs the intense heat and vibrations from the engine. As...

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short)

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short)

$ 3.59 Save $ 0.01

This is a set of three 0.63" or 5/8" ProTek R/C Short Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. These Exhaust Manifold Springs attach the tuned pipe to the tuned pipe manifold. These springs tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the springs weaken and can become loose which can lead to gasket damage or leaks. Specifications: Length: 0.63" (15.8mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long)

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long)

$ 3.59 Save $ 0.41

This is a set of two ProTek R/C Long Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Springs attach the tuned pipe manifold to the engine exhaust port. With the manifold springs wrapping around the engine, over time they tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the manifold springs weaken and become vulnerable to breaking which can lead to manifold gasket damage;...

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines)

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines)

$ 6.99 Save $ 0.01

The ProTek T4 Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T4 "Hot" heat range plug is a good general purpose plug recommended for .12 to .21 size engines running 10 - 36% nitro in most climate conditions. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot"...

ProTek RC Aluminum Clamping Servo Horn (Black) (25T-ProTek)

ProTek RC Aluminum Clamping Servo Horn (Black) (25T-ProTek)

$ 11.99 Save $ 0.01

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm...

ProTek RC Aluminum Servo Horn (24T-Hitec)

ProTek RC Aluminum Servo Horn (24T-Hitec)

$ 7.99 Save $ 0.01

  This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 24 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features:  19mm hole spacing (measured from output shaft screw hole,...

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium)

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium)

$ 3.59 Save $ 0.01

This is a set of two ProTek R/C 1.25" Medium Length Exhaust Manifold Springs intended for use with 1/8 scale nitro engines with mounting tabs on the both sides of the engine case. These springs attach the tuned pipe manifold to the engine case using the spring tabs; if you're engine does not have spring tabs you will need the wrap around style long springs (PTK-7100). Specifications: Length: 1.25" (34mm) Thickness: 0.16" (4mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

ProTek RC 1/8 Scale Flywheel Nut, Collet & Shim Kit

ProTek RC 1/8 Scale Flywheel Nut, Collet & Shim Kit

$ 7.99 Save $ 0.01

This is a ProTek R/C Flywheel Nut, Collet and Shim Set, and is intended for use with 1/8 Scale Nitro Engines. Having the proper shims for the job is important. You don't want too much play or too little. This ProTek R/C Flywheel Nut, Collet and Shim Set is sure to have what you need to get it just right. Includes:  (1) Flywheel Nut (2) Flywheel Nut Shim (1) Crankshaft Screw (1) Collet (1) Collet Shim (1) Collet Insert (6)...

ProTek RC "DustBuster 2" RC8B3/8IGHT/D817/Serpent Pre-Oiled Air Filter Foam (6)

ProTek RC "DustBuster 2" RC8B3/8IGHT/D817/Serpent Pre-Oiled Air Filter Foam (6)

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Pre-Oiled Air Filters, intended for use with the Team Associated RC8B3, Losi/TLR 8IGHT family of vehicles, Serpent family of vehicles and the D8 family of vehicles equipped with the optional Hot Bodies V2 Air Filter Set (HBS114623). In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing...

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (24T-Hitec)

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (24T-Hitec)

$ 14.25

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum alloy and anodized black color. The horn has been machined to the exact specifications and dimensions of the plastic Team Associated ASC9180 servo horn, but provides the precision, rigidity and durability required for the latest generation of high-performance R/C vehicles. The horn also weighs a mere two grams while providing the insurance of the clamping design...

ProTek RC Self Stick Chassis Weight Strip (2) (120g/4.2oz)

ProTek RC Self Stick Chassis Weight Strip (2) (120g/4.2oz)

$ 4.99 Save $ 0.01

This two pack of ProTek R/C Self Stick Chassis Weight Strips feature twenty-four 5 gram weights backed by double-sided sticky tape. The small compact design of these weights allow you to used them in tight spots, laying flat or stacked up, to balance your chassis bias where needed. Package includes a total of 120 grams, or 4.2 ounces. Features:  Compact 20x9.4x4.4mm design  Backed by pre-applied sticky tape Corrects chassis weight bias  120 grams per package Includes: (24) 5 Gram Self Stick Weights...

ProTek RC "DustBuster 2" RC8B3/8IGHT/D817/Serpent Pre-Oiled Air Filter Foam (6)

ProTek RC "DustBuster 2" RC8B3/8IGHT/D817/Serpent Pre-Oiled Air Filter Foam (6)

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Pre-Oiled Air Filters, intended for use with the Team Associated RC8B3, Losi/TLR 8IGHT family of vehicles, Serpent family of vehicles and the D8 family of vehicles equipped with the optional Hot Bodies V2 Air Filter Set (HBS114623). In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing...

ProTek RC "SureStart" Replacement Switch Contact (3)

ProTek RC "SureStart" Replacement Switch Contact (3)

$ 2.99

This is a pack of three replacement ProTek R/C "SureStart" Switch Contact's, and are intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500).   PROTEK R/C PTK-4500

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set

$ 2.99

This is a replacement ProTek R/C .21 & .28 Engine Carburetor, Exhaust and Fuel Inlet Caps Set. This set includes a 3mm banjo fitting cap, 16mm carburetor cap, and a 17mm exhaust cap.  PROTEK R/C SAMURAI 321B

ProTek RC T5 Medium Turbo Glow Plug (.12 and .21 Engines)

ProTek RC T5 Medium Turbo Glow Plug (.12 and .21 Engines)

$ 6.99 Save $ 0.01

The ProTek T5 Medium Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T5 "Medium" heat range plug is recommended for .12 to .21 size engines running 10 - 36% nitro in hot climates. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot" plug recommended for .12 to .21...

ProTek RC "DustBuster 2" Tekno Pre-Oiled Air Filter Foam (6)

ProTek RC "DustBuster 2" Tekno Pre-Oiled Air Filter Foam (6)

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Pre-Oiled Air Filters, intended for use with Tekno 1/8 nitro vehicles. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it...

ProTek RC 3x4mm "High Strength" Cup Style Set Screw

ProTek RC 3x4mm "High Strength" Cup Style Set Screw

$ 2.39 Save $ 0.01

ProTek RC 3x4mm "High Strength" Cup Style Set Screws (10) Compatibility: Yokomo Formula 001

ProTek RC 4x16mm "High Strength" Button Head Screws (10)

ProTek RC 4x16mm "High Strength" Button Head Screws (10)

$ 2.39 Save $ 0.01

This is a pack of ten 4x16mm "High Strength" Button Head Screws from ProTek R/C. These are made from metric grade 12.9 steel which has a minimum tensile strength of 174,000 PSI. These screws are the strongest you can get and are suitable for the most demanding applications! Most manufacturer brand screws are not grade 12.9 steel, so these are a great upgrade for your car, truck or helicopter!

ProTek RC 4x16mm "High Strength" Flat Head Screws

ProTek RC 4x16mm "High Strength" Flat Head Screws

$ 2.39 Save $ 0.01

ProTek RC 4x16mm "High Strength" Flat Head Screws (10)

ProTek RC 155S Digital "High Speed" Metal Gear Servo (High Voltage/Metal Case)

ProTek RC 155S Digital "High Speed" Metal Gear Servo (High Voltage/Metal Case)

$ 139.99 Save $ 20.01

This is the ProTek R/C 155S Digital Hi-Speed Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what the competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support. The ProTek R/C 155S High Voltage Hi-Speed servo delivers lighting fast 0.08 transit speed and 308 oz-in of torque at 6.0V, and when...

ProTek RC 5x5mm "High Strength" Cup Style Set Scre

ProTek RC 5x5mm "High Strength" Cup Style Set Scre

$ 2.39 Save $ 0.01

ProTek RC 5x5mm "High Strength" Cup Style Set Screws (10)

ProTek RC Samurai 321B Carburetor Boot

ProTek RC Samurai 321B Carburetor Boot

$ 5.99 Save $ 0.01

This is a replacement ProTek R/C Samurai 321B Carburetor Boot. This rubber boot is installed over the carburetor slide assembly and helps to prevent air leaks, as well as protects the slide from dirt and debris. Compatibility: ProTek R/C Samurai 321B

ProTek RC "DustBuster 2" XRAY XB8 2017 Low Profile Pre-Oiled Air Filter Foam (6)

ProTek RC "DustBuster 2" XRAY XB8 2017 Low Profile Pre-Oiled Air Filter Foam (6)

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" XRAY Low Profile Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem within the time it takes to burn a tank...

ProTek RC "DustBuster 2" Kyosho TKI2/TKI3/TKI4 Pre-Oiled Air Filter Foam (6)

ProTek RC "DustBuster 2" Kyosho TKI2/TKI3/TKI4 Pre-Oiled Air Filter Foam (6)

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Kyosho TKI2/TKI3/TKI4 Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it takes to burn through a tank...

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Blue) (24T-Hitec)

ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Blue) (24T-Hitec)

$ 14.25 Save $ 0.25

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum alloy and anodized blue color. The horn has been machined to the exact specifications and dimensions of the plastic Team Associated ASC9180 servo horn, but provides the precision, rigidity and durability required for the latest generation of high-performance R/C vehicles. The horn also weighs a mere two grams while providing the insurance of the clamping design...

ProTek RC "SureStart" Replacement 3mm Square Nut (4)

ProTek RC "SureStart" Replacement 3mm Square Nut (4)

$ 3.59

This is a pack of four replacement ProTek R/C "SureStart" 3mm Square Nuts, and are intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500).    PROTEK R/C PTK-4500

ProTek RC "SureStart" Replacement HTD-3M-213 Belt (2)

ProTek RC "SureStart" Replacement HTD-3M-213 Belt (2)

$ 8.99

This is a pack of two replacement ProTek R/C "SureStart" HTD-3M-213 Belts, and are intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500).   PROTEK R/C PTK-4500

ProTek RC "SureStart" Replacement Motor Mount Brace

ProTek RC "SureStart" Replacement Motor Mount Brace

$ 2.49

This is a replacement ProTek R/C "SureStart" Motor Mount Brace, and is intended for use with the ProTek R/C "SureStart" 1/8 off road starter box (PTK-4500). PROTEK R/C PTK-4500