RC Car & Truck Parts

RC Car & Truck Parts



Kyosho Front Lower WC Suspension Arm Set

Kyosho Front Lower WC Suspension Arm Set

$ 9.99 Save $ 4.51

This is an optional Kyosho Front Lower WC Suspension Arm Set. These arms replace the older IF427B WC arms and are a direct fit. Package includes a left and right side arm.     Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4    

Kyosho MP9 1/8 Buggy Wing (Neon Yellow)

Kyosho MP9 1/8 Buggy Wing (Neon Yellow)

$ 14.49 Save $ 0.01

This is a Kyosho MP9 1/8 Buggy Wing. This wing was wind tunnel tested to work in combination with the MP9 body, and when used together will provide improved aerodynamic performance. Plus, its available in a variety of colors so you can get the perfect color to suit your paint scheme. Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4 Kyosho Inferno...

Kyosho Medium Length Big Bore Shock Spring (Red/Medium-Hard)

Kyosho Medium Length Big Bore Shock Spring (Red/Medium-Hard)

$ 20.99 Save $ 0.01

This is a Kyosho Medium Length Big Bore Shock Spring Set, and is intended for use on the front of the Kyosho Ultima SC, RT5 and DB vehicles that are equipped with big bore shocks. These springs are considered medium-hard rate. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness    Compatibility: Kyosho Ultima DB Kyosho Ultima RT5...

Kyosho Wheel Shaft (1)

Kyosho Wheel Shaft (1)

$ 16.75

This is a replacement Kyosho rear wheel shaft, and is intended for use with the Ultima RB5 and Lazer ZX5 driveshafts.   Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Ultima RB5 Kyosho Ultima RB6 Kyosho Ultima SC Kyosho Ultima SC6

Kyosho Front & Rear Lower Suspension Arm Set (ZX-5 FS2)

Kyosho Front & Rear Lower Suspension Arm Set (ZX-5 FS2)

$ 7.99 Save $ 0.01

This is a replacement Kyosho Front & Rear Lower Suspension Arm Set, and is intended for use with the Kyosho Lazer ZX-5 FS2. This package includes one front arm and one rear arm that can be used on either the right or left side of the vehicle.   Kyosho Lazer ZX-5 Kyosho Lazer ZX-6

Kyosho Differential Bevel Gear Set

Kyosho Differential Bevel Gear Set

$ 5.99 Save $ 0.01

This is a pack of replacement differential internal bevel gears for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These are the standard internal gears for the front, center and rear differentials on Kyosho buggies, and are the most popular type of differential gears for US style tracks.   Compatibility:  Kyosho Inferno GT/GT2 Kyosho Inferno MP7.5 Kyosho Inferno MP777 Kyosho Inferno ST-R Kyosho Inferno ST-RR Kyosho Inferno ST-RR EVO Kyosho Inferno ST-RR EVO.2 Kyosho Mad...

Kyosho Front Hub Carrier Set

Kyosho Front Hub Carrier Set

$ 16.75 Save $ 1.25

This is a replacement Kyosho Front Hub Carrier Set. This set includes a right and left side carrier, as well as four carrier inserts.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4  

Kyosho MP9 TKI4 1/8 Plastic Wing w/Wickerbills (Black)

Kyosho MP9 TKI4 1/8 Plastic Wing w/Wickerbills (Black)

$ 13.75 Save $ 0.25

This is the replacement Kyosho Plastic Wing included with the TKI4 Buggy Kit. This plastic wing is offered in multiple colors and features mounting holes for quick installation, as well as two wickerbills for high or low downforce. Mounting hardware is also included.  Available Colors:  KYOIF491BK: Black  KYOIF491KG: Green  KYOIF491KO: Orange  KYOIF491KY: Yellow  KYOIF491W: White KYOIF491KR: Red  Compatibility: Kyosho Inferno MP10 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Evo Kyosho Inferno MP9e TKI4

Kyosho MP9 1/8 Buggy Wing (Black)

Kyosho MP9 1/8 Buggy Wing (Black)

$ 14.49 Save $ 0.51

This is a Kyosho MP9 1/8 Buggy Wing. This wing was wind tunnel tested to work in combination with the MP9 body, and when used together will provide improved aerodynamic performance. Plus, its available in a variety of colors so you can get the perfect color to suit your paint scheme. Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4 Kyosho Inferno...

Kyosho 44mm Inner Suspension Shaft Set (2)

Kyosho 44mm Inner Suspension Shaft Set (2)

$ 4.99 Save $ 0.01

This is a replacement Kyosho 44mm Inner Suspension Shaft Set, and is intended for use with the Kyosho Ultima RB6 and Lazer ZX-5 1/10 scale buggies. These shafts are used in the rear inner position on the RB6 and the front and rear inner position on the ZX-5. These pins attach the arms to the differential bulkheads.   Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Ultima DB Kyosho Ultima RB5 Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT5...

Kyosho 4x68.5mm Suspension Shaft (2)

Kyosho 4x68.5mm Suspension Shaft (2)

$ 9.00 Save $ 1.00

This is a pack of two replacement Kyosho 4x68.5mm Suspension Shafts.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI  

Kyosho 4x64.5mm Suspension Shaft (2)

Kyosho 4x64.5mm Suspension Shaft (2)

$ 8.99 Save $ 0.01

This is a pack of two Kyosho MP9 4x64.5mm Suspension Shafts. These hardened steel hinge pins are used in the front inner position.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI  

Kyosho 3.5mm Shock Rebuild Kit (2)

Kyosho 3.5mm Shock Rebuild Kit (2)

$ 10.99 Save $ 0.01

This is a set of four replacement shock O-rings, washers and springs for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These is the shock rebuild kit for regular and Special 1 MP777 buggies as well as the Kanai 2 and Kanai 3 MP7.5 buggies. You can use this rebuild kit to rebuild two 3.5mm shocks, as it includes both the white washers and the shock O-ring retaining rings.  Compatibility: Kyosho Inferno GT/GT2 Kyosho Inferno...

Kyosho Rear Bulk Head w/Sway Bar Mount (Mid Motor)

Kyosho Rear Bulk Head w/Sway Bar Mount (Mid Motor)

$ 8.99 Save $ 0.01

This is a replacement Kyosho Mid Motor Rear Bulk Head, and is intended for use with the Kyosho RB6 equipped with the optional Kyosho Mid Motor Rear Stabilizer Set (KYOUMW708). This is the updated RB6 mid motor bulk head that includes a sway bar mounting point.   Compatibility: Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT6

Kyosho Long King Pin Set (MP9)

Kyosho Long King Pin Set (MP9)

$ 7.99 Save $ 0.01

This is the Kyosho Long King Pin Set, and is intended for use with the Kyosho MP9 1/8 buggy. This king pin set reduces the possibility of the steering knuckle coming out in the event of a hard impact. These come stock on the MP9 TKI2. Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9e Kyosho Inferno MP9e Evo Kyosho Inferno MP9e TKI  

Kyosho ZX6.6 Center Differential Gear Case Set

Kyosho ZX6.6 Center Differential Gear Case Set

$ 18.75 Save $ 0.25

Kyosho ZX6.6 Center Differential Gear Case Set. This is a replacement for the Kyosho ZX6.6 Center Differential Set (KYOLA375). Compatibility: Kyosho Lazer ZX-6.6

Kyosho Big Bore Front Shock Spring Set (Gold/Medium) (2)

Kyosho Big Bore Front Shock Spring Set (Gold/Medium) (2)

$ 16.75 Save $ 0.25

This is a Kyosho Big Bore Front Shock Spring Set, and is intended for use with the Kyosho Lazer and Ultima buggies that are equipped with big bore shocks. These springs are considered medium rate. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness   Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Ultima RB5 Kyosho Ultima RB6...

Kyosho Wing Washer (2)

Kyosho Wing Washer (2)

$ 4.99 Save $ 0.01

This is a pack of two Kyosho Wing Washers. These machined aluminum wing washers are anodized in the trademark Kyosho Gun Metal finish. Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e Evo Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4 Kyosho Inferno ST-RR EVO Kyosho Inferno ST-RR EVO.2

Kyosho Steering Knuckle & Caster Block Set

Kyosho Steering Knuckle & Caster Block Set

$ 9.99 Save $ 0.01

This is a replacement Kyosho Steering Knuckle & Caster Block Set. Package includes 7° and 10° caster blocks, as well as a set of steering knuckles. These are also compatible with the ZX5 series and will provide improved steering thanks to the updated steering linkage location.  Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6

Kyosho Rear Upper Bulkhead

Kyosho Rear Upper Bulkhead

$ 7.99 Save $ 0.01

This is a replacement Kyosho Rear Upper Bulkhead. Package includes swaybar holders. Compatibility: Kyosho Lazer ZX-6  

Kyosho Rear Lower Suspension Arms

Kyosho Rear Lower Suspension Arms

$ 12.99 Save $ 0.01

This is a pack of two replacement Kyosho Rear Lower Suspension Arms. These are compatible with the full line of Kyosho MP9 1/8 scale buggies. Package includes left and right side arms, as well as eight inserts that allow you to adjust the rear track width.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI

Kyosho Rear Chassis Brace Set

Kyosho Rear Chassis Brace Set

$ 6.99 Save $ 0.01

This is a replacement Kyosho Rear Chassis Brace Set. Package includes rear top plate, chassis brace and body support.    Compatibility: Kyosho Lazer ZX-6    

Kyosho P6 Orange Differential O-Rings (15)

Kyosho P6 Orange Differential O-Rings (15)

$ 5.99 Save $ 0.01

This is a set of fifteen replacement P6 orange O-Rings for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These small P6 orange O-Rings are used in the differentials to seal the differential outdrive shafts to the differential case to stop the silicone diff oil from leaking from the buggy. Compatibility: Kyosho Inferno GT/GT2 Kyosho Inferno MP7.5 Kyosho Inferno MP777 Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4...

Kyosho HD Rear Universal Swing Shaft

Kyosho HD Rear Universal Swing Shaft

$ 35.99 Save $ 0.01

This is a replacement Kyosho HD Rear Universal Swing Shaft, and is intended for use with the Kyosho MP9 TKI3 1/8 scale buggy, but can also be used optionally with the MP9 TKI2, MP9 and MP9e 1/8 scale buggies. This shaft is used in the rear-center position, is 110mm long and includes a set screw.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI4  

Kyosho Front Upper Bulkhead

Kyosho Front Upper Bulkhead

$ 6.99 Save $ 0.01

This is a replacement Kyosho Front Upper Bulkhead. Includes swaybar holders, as well as 1 and: .05mm arm mount spacers. Compatibility: Kyosho Lazer ZX-6  

Kyosho Front Chassis Brace Set

Kyosho Front Chassis Brace Set

$ 7.99 Save $ 0.01

This is a replacement Kyosho Front Chassis Brace Set. Package includes top plate, chassis brace and steering post mount.  Compatibility: Kyosho Lazer ZX-6

Kyosho Differential Case w/Gasket

Kyosho Differential Case w/Gasket

$ 6.99 Save $ 0.01

This is a replacement differential case for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. This is the case that the differential gears are held inside of for Kyosho buggies. Also included is the differential gasket that seals the main gear to the differential case. Compatibility: Kyosho Inferno GT/GT2 Kyosho Inferno MP7.5 Kyosho Inferno MP777 Kyosho Inferno ST-R Kyosho Inferno ST-RR Kyosho Inferno ST-RR EVO Kyosho Inferno ST-RR EVO.2 Kyosho Mad Crusher GP Kyosho Mad...

Kyosho Center Differential Spur Gear (MP777) (46T)

Kyosho Center Differential Spur Gear (MP777) (46T)

$ 24.00 Save $ 3.00

Kyosho center differential spur gear. These gears are compatible with the Inferno MP7.5, MP777, and ST-R family of 1/8 off road vehicles. This is the spur gear that attaches to the center differential and transfers the power from the engine clutch bell to the center drive train. Choose from 46 or 48 tooth count options to allow you to fine tune the torque and top speed of your model. Compatibility: Kyosho Inferno MP7.5 Kyosho Inferno MP777 Kyosho Inferno ST-R Kyosho...

Kyosho Center Differential Outdrive Shafts (2)

Kyosho Center Differential Outdrive Shafts (2)

$ 10.99 Save $ 0.01

This is a pack of two replacement center differential outdrive shafts for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These are the outdrives for the center differential that connect the differentials to the center dog bones or universals. They are flat so that the brake pads can be attached to the center differential. Compatibility: Kyosho Inferno MP7.5 Kyosho Inferno MP777 Kyosho Inferno ST-R Kyosho Inferno ST-RR Kyosho Inferno ST-RR EVO Kyosho Inferno ST-RR EVO.2...

Kyosho 73mm Universal Swing Shaft

Kyosho 73mm Universal Swing Shaft

$ 11.99 Save $ 0.01

This is a replacement Kyosho 73mm Universal Swing Shaft for use with the Kyosho 73mm Front Universal Swing Shaft Set (KYOLA257).  Compatibility:  Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Lazer ZX-6.6

Kyosho Aluminum Medium Length WC "B" Rear Shock Tower

Kyosho Aluminum Medium Length WC "B" Rear Shock Tower

$ 57.99 Save $ 12.01

This is an optional Kyosho Aluminum Medium Length WC "B" Shock Tower, and is intended for use with the Kyosho MP9 TKI2 1/8 Scale Buggy. This is the shock tower that is included with the special edition MP9 TKI2 WC Kit. Kyosho introduced this shock tower to the team drivers at the 2010 1/8 scale IFMAR Worlds race in Thailand and it was used by Cody King to win the title. The shock tower features additional roll center positions, with...

Kyosho Front Hub Carrier Set

Kyosho Front Hub Carrier Set

$ 9.99 Save $ 0.01

 This is a replacement Kyosho Front Hub Carrier Set, and is intended for use with the Kyosho Ultima RB6 1/10 scale buggy. This package also includes eight spacers and six hub carrier inserts.  Compatibility: Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT6  

Kyosho Suspension Bushing Set (White)

Kyosho Suspension Bushing Set (White)

$ 7.99 Save $ 0.01

This is a replacement Kyosho Suspension Bushing Set, and is intended for use with the Kyosho Inferno MP9 1/8 buggy. This set includes twenty two bushings, allowing for a variety of tuning options, as well as an economical maintenance program because the design allows replacement of the bushings, instead of the entire suspension holder. Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e Evo Kyosho Inferno MP9e...

Kyosho Clamping Wheel Hub Set (Gunmetal) (2)

Kyosho Clamping Wheel Hub Set (Gunmetal) (2)

$ 16.75 Save $ 1.25

This is a replacement Kyosho Clamping Wheel Hub Set. These will also work with the Lazer, TF-5, and Ultima vehicles as an optional replacement for the stock plastic hubs. These clamp to the axles and will help to eliminate the possibility of a snapped wheel pin.    Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho TF-5 Kyosho TF-5 Stallion Kyosho Ultima DB Kyosho Ultima RB5 Kyosho Ultima RB6 Kyosho Ultima RB6.6 Kyosho Ultima RT5 Kyosho Ultima SC Kyosho Ultima SC6...

Kyosho Big Bore Front Shock Spring Set (Red/Hard) (2)

Kyosho Big Bore Front Shock Spring Set (Red/Hard) (2)

$ 17.25 Save $ 0.25

This is a Kyosho Big Bore Front Shock Spring Set, and is intended for use with the Kyosho Lazer and Ultima buggies that are equipped with big bore shocks. These springs are considered hard rate.  Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness . Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Ultima RB5 Kyosho Ultima RB6...

Kyosho RB6.6 Blade LD Body (Clear)

Kyosho RB6.6 Blade LD Body (Clear)

$ 24.99 Save $ 0.01

Kyosho RB6.6 Blade LD Body. Package includes replacement RB6.6 clear body with factory applied overspray film and window masks. Compatibility: Kyosho Ultima RB6.6

Kyosho Suspension Arm Set

Kyosho Suspension Arm Set

$ 5.99 Save $ 0.01

This is a replacement Kyosho Suspension Arm Set. Package includes front and rear suspension arms as well as camber links.   Compatibility: Kyosho Rage VE

Kyosho Wing Stay Set

Kyosho Wing Stay Set

$ 7.99 Save $ 0.01

This is a replacement Kyosho Wing Stay Set. These are compatible with the full line of Kyosho MP9 1/8 scale buggies. Package includes left and right side rear wing mounts, wing mount plates, a rear chassis brace mount and rear body mount.   Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI

Kyosho D11 Diaphragm (Fluorine Rubber/4pcs) W5307-05)

Kyosho D11 Diaphragm (Fluorine Rubber/4pcs) W5307-05)

$ 5.99 Save $ 0.01

W5307-05 D11 Diaphragm (Fluorine Rubber/4pcs) Shock diaphragm for W5307R big bore short shocks. 4pcs.

Kyosho V2 0° Aluminum Rear Hub Carrier Set (Gunmetal)

Kyosho V2 0° Aluminum Rear Hub Carrier Set (Gunmetal)

$ 41.99 Save $ 8.01

This is an optional Kyosho V2 0° Aluminum Rear Hub Carrier Set. These hub carriers feature 0° of outboard rear toe in, and bearing inserts that allow you to use either a 5x13/5x11mm axle bearing configuration, or a 5x10/5x10 bearing configuration. Additionally, the use of bearing inserts helps to improve drive train efficiency and extend the life of the hubs.   Compatibility: Kyosho Lazer ZX-5 Kyosho Lazer ZX-6 Kyosho Ultima DB Kyosho Ultima RB5 Kyosho Ultima RB6 Kyosho Ultima RB6.6...

Kyosho 3x35mm Suspension Shaft (2)

Kyosho 3x35mm Suspension Shaft (2)

$ 6.99 Save $ 0.01

This is a pack of two replacement Kyosho 3x35mm Suspension Shafts. This package also includes two screws.  Compatibility: Kyosho Inferno MP9 Kyosho Inferno MP9 TKI2 Kyosho Inferno MP9 TKI3 Kyosho Inferno MP9 TKI4 Kyosho Inferno MP9e Kyosho Inferno MP9e TKI Kyosho Inferno MP9e TKI4