RC Car & Truck Parts

RC Car & Truck Parts



JConcepts Mugen MBX7 ECO "Silencer" Body (Clear) **

JConcepts Mugen MBX7 ECO "Silencer" Body (Clear) **

$ 26.35 Save $ 4.65

This is the JConcepts Mugen MBX7 ECO "Silencer" Body. Developed for high speed tracks, the Silencer body style is now available for the Mugen MBX7 ECO buggy. A ground up design, the Silencer has a profiled, Finnisher stance cockpit that provides more fuel tank access, a smoother high-speed transition and increased flow around the engine heat-sink. A deep recess around the heat-sink area with dual channeling out the rear provides air escape along with rear-end stability. The Silencer side-pods have...

JConcepts Hybrid Pre-Trimmed 1/8 Lexan Wing w/Gurney Options (Black) **

JConcepts Hybrid Pre-Trimmed 1/8 Lexan Wing w/Gurney Options (Black) **

$ 22.95 Save $ 4.05

The JConcepts Hybrid 1/8 scale off road wing is a technically advanced alternative for 1/8th racing. The Hybrid wing features a design that incorporates a multi-height layout that allows the wing to sit in a lower stance. The side-dams feature a surface which has a recessed section that helps to increase rigidity. The pre-trimmed polycarbonate wing formed in heavy-duty material has a hard chamfered leading edge to the side-dams giving it a classic JConcepts look. Angular sections blend nicely into...

JConcepts B6/B6D "Aero" Short Chord Rear Wing (2) **

JConcepts B6/B6D "Aero" Short Chord Rear Wing (2) **

$ 11.90 Save $ 2.10

The JConcepts B6/B6D "Aero" Short Chord Rear Wing features a leading edge that drops below the mounting point that acts in a scooping manner. What separates the JCO0169 wing from the standard JCO0168 is the shorter deck length, otherwise known as the “chord length.” The shorter chord has less rear overhang allowing for quicker rotation in 180 degree turns and will have less impact in gusty wind conditions or long aerial maneuvers. The center channel is just narrow enough for the...

JConcepts Tekno EB410 Aero S-Type Rear Buggy Wing (2) (Clear) **

JConcepts Tekno EB410 Aero S-Type Rear Buggy Wing (2) (Clear) **

$ 12.75 Save $ 2.25

This is two pack of JConcepts Tekno EB410 Aero S-Type Rear Wings in Clear Lexan.  NOTE: Completed vehicle shown for illustrative purposes only and is not included.  Compatibility: Tekno RC EB410 Tekno RC ET410

JConcepts Tekno EB410 "F2" 4WD Buggy Body w/6.5" Aero Wing (Clear) **

JConcepts Tekno EB410 "F2" 4WD Buggy Body w/6.5" Aero Wing (Clear) **

$ 28.49 Save $ 4.51

This is an optional JConcepts "F2" 4WD Clear Buggy Body for the Tekno EB410 4WD Buggy. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. The F2 body is a drop fit for the popular Tekno EB410 buggy. With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the...

JConcepts Aero S-Type TLR 22 4.0 Wing Clear (2) JCO0193 **

JConcepts Aero S-Type TLR 22 4.0 Wing Clear (2) JCO0193 **

$ 12.75 Save $ 2.25

JConcepts Aero S-Type TLR 22 4.0 Wing Clear (2) JCO0193

JConcepts RM2 Medium Bore Glue Tip Needles (Green) (10) **

JConcepts RM2 Medium Bore Glue Tip Needles (Green) (10) **

$ 6.00

The JConcepts Medium Bore Glue Tip Needles are much needed accessories for any pit bag. It's common to see racers scrambling for the right part in the pits, and glue tips seem to be one of the most sought after items. Typically, one needle will last several weekends or more, however under certain conditions they seem to get lost in the shuffle or cleaned incorrectly, leaving the racer without at a key time. These RM2 needles are plastic tipped so...

JConcepts HB Racing D817v2 "S15" Body (Clear) **

JConcepts HB Racing D817v2 "S15" Body (Clear) **

$ 28.90 Save $ 5.10

This is the JConcepts S15 1/8 Nitro Buggy Body in Clear Lexan, for use with the HB Racing D819; as well as the D817 V2. The S15 blends performance features on the popular Silencer body with features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep rooted position allows the engine head maximum side exposure...

JConcepts RM2 Thin Bore Glue Tip Needles (Pink) (10) **

JConcepts RM2 Thin Bore Glue Tip Needles (Pink) (10) **

$ 5.99 Save $ 0.01

The JConcepts Thin Bore Glue Tip Needles are much needed accessories for any pit bag. It's common to see racers scrambling for the right part in the pits, and glue tips seem to be one of the most sought after items. Typically, one needle will last several weekends or more, however under certain conditions they seem to get lost in the shuffle or cleaned incorrectly, leaving the racer without at a key time. These RM2 needles are plastic tipped so...

JConcepts Fin Aluminum 12mm V2 Shock Cap (Blue) (2) **

JConcepts Fin Aluminum 12mm V2 Shock Cap (Blue) (2) **

$ 12.75 Save $ 2.25

The JConcepts Fin Aluminum 12mm V2 Shock Cap is precision machined with angular bleed hole to allow for correct building procedure and maintenance, and are a must have addition for your Associated V2 shocks. The cap features weight reducing holes positioned about the center to reduce weight and the precision of the machined threads and knurling allow for a smooth transition while the cap seals over the standard shock body o-ring during assembly. The caps are available in blue or...

JConcepts HB D418 "F2" 1/10 Buggy Body w/6.5" Aero Wing (Clear) **

JConcepts HB D418 "F2" 1/10 Buggy Body w/6.5" Aero Wing (Clear) **

$ 28.49 Save $ 4.51

This is an optional JConcepts HB D418 "F2" 1/10 Buggy Body, with two included 6.5" Aero Wings. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. The F2 body is a drop fit for the popular HB Racing D418 buggy.  With the evolution of race tracks, complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits...

JConcepts RC8T3/RC8T3e "Finnisher" Illuzion Truggy Body (Clear) **

JConcepts RC8T3/RC8T3e "Finnisher" Illuzion Truggy Body (Clear) **

$ 29.99 Save $ 7.01

This is the JConcepts "Finnisher" Illuzion Clear Truggy Body for the Team Associated RC8T3 and RC8T3e. This Finnisher body incorporates pre-dimpled locations for one of the hottest truggies on the circuit. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core. A wide front hood scoop allows plenty of clearance for the unique RC8T3 shock geometry. The body incorporates a large center fin which begins on the roof line and finishes just past the half-way point...

JConcepts TLR 22-4 "Silencer" Body (Clear) **

JConcepts TLR 22-4 "Silencer" Body (Clear) **

$ 22.49 Save $ 3.51

This is a JConcepts TLR 22-4 "Silencer" Body, with two included 6.5" Wide High Clearance Wings. The Silencer is a fresh, ground up design that includes elements created for the high speed circuits. A profiled, Finnisher stance cockpit and forward raised side pod gives the Silencer an immediate fighting appearance. A smooth, high speed transition around the cab keeps the Silencer heading in the right direction. Just behind the shock tower rests a small scoop that can be trimmed as...

JConcepts B64/B64D "S2" Illuzion 4WD Buggy Body w/Aero Wing **

JConcepts B64/B64D "S2" Illuzion 4WD Buggy Body w/Aero Wing **

$ 27.49 Save $ 4.51

 This is the JConcepts B64/B64D "S2" Illuzion 4WD Buggy Body. What is the response when a popular vehicle hits the market? It’s simple; add the most popular and best performing body to date to an already successful platform. Dubbed the S2, the shell rocks some familiar features but rolled together with a low-profile stance. With 2015 IFMAR Championship credibility backing this design, it’s an easy choice. The S2 is a performer straight out of the package, with the Aero...

JConcepts RC10 B74 "F2" Body w/S-Type Wing (Clear) **

JConcepts RC10 B74 "F2" Body w/S-Type Wing (Clear) **

$ 28.90 Save $ 5.10

The JConcepts Clear RC10 B74 "F2" Body with S-Type Wing was designed with aspects learned from the original Finnisher bodies. The F2 is a drop fit for the popular Team Associated B74 and provides an even more aggressive look with details that are crucial to performance.  With the evolution of race tracks with complicated circuits combining more aggressive jumps and extremely high-speed corners, JConcepts incorporated many features which provide several benefits in the most critical situations. Increased windshield angle provides...

JConcepts RC8B3/RC8T3 Suspension Arm Cap & Camber Shim Set (Black) (0.5°, 1° & 2°) **

JConcepts RC8B3/RC8T3 Suspension Arm Cap & Camber Shim Set (Black) (0.5°, 1° & 2°) **

$ 25.50 Save $ 4.50

The JConcepts RC8B3/RC8T3 Suspension Arm Cap & Camber Shim Set is a welcome addition to the list of upgrades for the RC8B3, RC8B3e and RC8T3 vehicles. These make it easier and faster to adjust chamber and track width. The JConcepts design features individual slotted shims which lock to one another. The arm caps have been machined to slide on the upper and lower arms and feature secondary machining to add an additional layer of bling. To adjust, partially unthread the pivot-balls...

JConcepts B6.1 Aero Rear Diffuser **

JConcepts B6.1 Aero Rear Diffuser **

$ 12.00

JConcepts B6.1 Aero Rear Diffuser. A rear diffuser is a huge part of 1:1 race car aerodynamic grip which has shown to improve performance. In off-road racing, ride-height, ground clearance and suspension travel substantially affect handling and are routinely adjusted to benefit one section of the track or another. It’s difficult to install low-mounted aerodynamic features because of the general abuse off-road vehicles endure, however, JConcepts has taken on the task to mount another aero option. For the all-important balance between...