RC Car & Truck Parts
Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T) (Silver) **
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is a light weight hardened steel 86 tooth, 48 pitch spur gear for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD Stampede vehicles Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Black oxide coated gear for durability and corrosion resistance Silver anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 86 Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 86 tooth 48 pitch spur gear (3) mounting screws (3)...
Hot Racing Axial Yeti 32P Steel Spur Gear (56T) **
The Hot Racing Axial Yeti 32P Steel Spur Gear is a heavy duty steel 32 pitch, 56 tooth spur gear for the Axial RR10 Bomber, double slipper SCX10, SCX10 II, Wraith, and Yeti. Features: Rugged 32 pitch (0.8 module) teeth for total reliability when using high power brushless systems CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Yeti application uses factory slipper pads Upgrade for factory plastic Axial Yeti AX31027 32P 56T spur gear...
Hot Racing 32P/0.8M Hardened Steel Spur Gear (Black) (68T) **
This is the the optional Hot-Racing 68T 32P 0.8 Mod Steel Spur Gear for the Traxxas E-Maxx, E-Revo, 1/8 Funny Car, and Summit. Compatibility: Traxxas 1/8 Funny Car Traxxas E-Maxx Traxxas E-Revo Traxxas Summit
HB Racing Woven Graphite Rear Arm Covers **
This is an optional Hot Bodies Woven Graphite Rear Arm Cover Set. These arm covers will allow you to fine tune the handling of your D812, by increasing the stiffness of the suspension arm. Plus, the graphite covers look pro, and are more durable than the stock parts. Compatibility: HB Racing D812 HB Racing D815 HB Racing D817 HB Racing D817 V2
Hot Racing Traxxas Slash 4x4 Aluminum Locking 12mm Wheel Hex Kit (Blue) **
Hot Racing Traxxas Slash 4x4 Aluminum Locking 12mm Wheel Hex Kit. NOTE: NOT compatible with the Traxxas 2WD vehicles Features: CNC machined aluminum, anodized blue Clamping design for secure attachment and no lost hexes Replaces Traxxas factory plastic wheel hexes TRA1654 Specifications: Hex size: 12mm Axle hole: 5mm Hex width: 5.5mm Total width: 6mm Includes: (4) 12mm wheel hexes (4) M2x5mm socket head cap screws (1) 1.5mm hex wrench (4) 2x10mm drive pins Compatibility: Traxxas Slash 4x4
Hot Racing 1/10 Aluminum Tow Shackle D-Rings (4) (Red) **
Hot Racing 1/10 Aluminum Tow Shackle D-Rings are a perfect fit on the Axial AXI80125 front bumper, the AXI80126 rear, and other custom projects. Features: CNC machined aluminum construction Red anodizing for durability, corrosion resistance, and great looks D-rings are essential for recovery efforts and a scale looks Recessed counterbore to hide screw head Specifications: Length: 16mm (0.6 inch) Width: 13mm (0.5 inch) Thickness: 2.2mm (0.09 inch) Eyelet hole diameter: 8mm (0.3 inch) Includes: (4) aluminum tow shackles (4) socket head cap screws
HB Racing 7x7.1mm Brass Flywheel Collet (2) **
This is a package of replacement 7mm brass engine collets from HB Racing. This is the collet that goes behind the flywheel to attach the flywheel to the crankshaft of the engine. Package contains two collets. Compatibility: HB Racing D817 V2 HB Racing D817T
Hot Racing 32P Aluminum Spur Gear (54T) **
This is an optional Hot Racing 32 Pitch, 54 Tooth Aluminum Spur Gear for use with the Traxxas Jato 3.3, Rally VXL, Slash 4x4, Stampede 4x4 and T-Maxx 3.3 with slipper clutch transmissions. Features: CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch transmissions Hard anodized with light gunmetal color Light-weight 0.8 module pitch (compatible with 32-pitch) Specifications:Outer diameter: 44.8mmThickness (face width): 6mm Compatibility: Traxxas Jato Traxxas Rally Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas T-Maxx
Hot Racing Axial Wraith Super Size Heat Sink Motor Plate (Black) **
Hot Racing Axial Wraith Super Size Heat Sink Motor Plate. Features: CNC Machined 6061-T6 aluminum construction Black in color heat sink slot Improves cooling Compatibility: Axial AX10 Axial SCX10 Axial Wraith
Hot Racing Axial SCX10 Hard Anodized Aluminum Transmission Gear Set **
The Hot Racing Axial AX10 Hard Anodized Aluminum Center Gear Set is a light weight aluminum transmission gear set for three-gear transmissions found in the Axial AX10, SCX10, SCX10 II (RTR only), SMT10 monster, and Wraith. Features: Precision CNC machined 6061-T6 aluminum Hard anodized gunmetal gray Replaces the stock nylon gears Light weight for less rotating mass NOTE: Compatible with Axial three-gear transmissions. Does not fit the SCX10 II kit. This is only compatible with the SCX10 II RTR. Replaces Axial...
Hot Racing Wraith CNC Machined Multi Mount Skid Plate **
This is the Hot Racing CNC Machined Multi Mount Skid Plate for the Axial Wraith. Hot Racing option upgrade aluminum skid plate with 4-link adjustment tabs and skid bearings for the Axial Wraith kit and RTR vehicles. Features: CNC machined billet aluminum construction Black anodizing for durability, corrosion resistance, and great looks Four ball bearings help vehicle roll over rocks, logs, and other obstacles and help prevent vehicle hang up Includes three upper 4-four link mounting positions to fine tune...
Hot Racing Complete AX10 Steel Gear Transmission (57T) **
This is the Hot Racing Complete Steel Gear Transmission for the Axial AX10 and SCX10 platforms. This complete transmission features a heavy duty 32 pitch, 57 tooth spur gear. Features: Hardened steel spur gear and internal gears Full sealed ball bearings Locked output gear Billet machined aluminum transmission case and motor mount Transmission case is anodized black with secondary-processed machined beveled edges Motor mount plate and gear hub are anodized green Super duty adjustable metallic-pad slipper system Heavy duty 32...
Hot Racing 107-142mm Steel Center Driveshaft (1) **
This is an optional Hot Racing 107-142mm Steel Center Driveshaft. Hot Racing optional upgrade heavy duty splined star drive shaft for the Axial AX10, Axial RR10 Front, Axial SCX10, Axial Wraith, Tamiya CC01, Tamiya CR01 (front), or a custom vehicle. Features: Heavy duty CNC machined hardened carbon steel construction Aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Compatible with 5mm output shafts Steel is black finished Compatible with 5mm output shafts M3 threaded...
Hot Racing Optional Rear 14x90mm Spring Set (4 pairs) **
This is the Hot-Racing optional Rear 14x90mm Spring Set for the Axial Yeti and AX10 Scorpion
Hot Racing Axial Yeti Aluminum One-Piece Wheel Hub Set (Blue) (4) **
Hot Racing Axial Yeti Aluminum One-Piece Wheel Hubs are an optional hub adapter for Axial Yeti, Wraith, and AX10 vehicles with AR60 axles. Features: CNC milled aluminum construction One-piece design eliminates strip-prone plastic-hub and the need for separate 12mm hex Compatible with the Axial licensed Trail Ready wheels and most wheels with six-screw bolt pattern Retains stock track width Blue anodizing for durability, corrosion resistance, and great looks Replaces Axial factory plastic AX31266, Hub Adapter and Axial factory AX30429, Wheel Hex...
Hot Racing Light Weight Unibody Differential Lock Wraith **
This is the optional Hot-Racing Light Weight Unibody Differential Lock for the Axial Wraith. Compatibility: Axial SMT10 Axial Wraith Axial Yeti Axial Yeti SCORE
Hot Racing SWRA288CWS Wide 5-15mm Cv Axle for SWRA288 (6) **DISCONTINUED
Widen 5,10,15mm Cv Axle for SWRA288 (6) for Axial Wraith 4WD Rock Racer RTR This is the optional Hot Racing HD wide CV Axlefor use on the SWRA288XD03 FEATURES: Steel constructionBlack in color YOU WILL RECEIVE: 2 HD +5mm Wide Rear Axle2 HD +10mm wide Rear Axle2 HD +15mm Wide Rear Axle REQUIREMENTS: Installation at SWRA288XD03 rear drive assembly SPECIFICATIONS: length: Stock +5mm +10mm +15mmShaft diameter: 5mm (0.20")
Hot Racing Steel Super Duty Spur Gear 32P 57T **
This is the Hot Racing Super Duty 32P 57T Spur Gear for the Axial Wraith, AX10, and SCX series trucks. **Cannot be used with stock 48P pinion gear, must be changed to 32P.** REQUIRES Must use with 32 pitch (0.8 module) pinion gear for proper gear mesh (stock pinion gear is 48 pitch and must be changed to 32P when using this spur gear) Compatibility: Axial AX10 Axial RR10 Bomber Axial SCX10 Axial SCX10 II Axial Wraith
Hot Racing Traxxas Slash 2WD Sealed Aluminum Differential Case **
This is an optional Hot Racing Sealed Aluminum Differential Case for the Traxxas 2WD line of Stampede, Rustler, Bandit, 2WD Slash, and Monster Jam vehicles. This Hot Racing sealed differential case features a machined aluminum differential with a hardened steel main differential gear. Features: CNC machined aluminum differential case Hardened steel main differential gear Sealed differentials allows you to tune to current track conditions by changing the weight of the diff. oil Four O-Rings help seal against fluid leakage which...
Hot Racing Axial Yeti Aluminum Front Suspension Control Arms (Black) **
Hot Racing Axial Yeti Aluminum Front Suspension Control Arms are a machined aluminum front lower suspension control arm upgrade for the 1/10th scale Axial Yeti and EXO kit and RTR vehicles. Features: CNC machined 6061-T6 aluminum construction Replaces factory plastic suspension arms Anodized black for durability, corrosion resistance, and great looks Secondary-processed machined chamfered edges High strength steel hardware Replaces factory plastic Axial AX80111 Lower Front Control Arms Set Compatibility: AXIAL YETI
Hot Racing Aluminum Front Body Mount Base AXI Yeti **
This is the optional Hot-Racing Front Body Mount Brace for the Axial Yeti. Compatibility: Axial Yeti
Hot Racing Axial SCX10 II Heavy Duty Steel Drive Shafts w/U-Joints (AXI90046 Kit Only) **
The Hot Racing Axial SCX10 II Heavy Duty Steel Drive Shafts is a heavy duty steel front and rear telescoping driveshaft optioin for the Axial SCX10 II Kit vehicles (not RTR). NOTE: This is not a complete driveshaft assembly. See list below for parts needed to build two complete driveshafts. Will NOT work with vehicles equipped with the RTR transmission. Must maintain telescoping assembly with grease Features: Heavy duty CNC machined hardened carbon steel construction 6061 aluminum screw-on sleeves to...
Hot Racing 107-142mm SCX10 Steel Center Drive Shaft (2) **
These are the optional Hot-Racing 109-135mm Steel Drive Shafts with U-Joints for the Axial original AX10 and original SCX10 vehicles. Compatibility: Axial AX10 Axial RR10 Bomber Axial SCX10 Axial Wraith
Hot Racing ACC80801 1/10 Scale Aluminum Black Tow Shackle D-Rings (4) **
Hot Racing 1/10 Aluminum Tow Shackle D-Rings are an aluminum 1/10th scale tow shackle (D-ring) that fit a variety of applications. Features: CNC machined aluminum construction Black anodizing for durability, corrosion resistance, and great looks D-rings are essential for recovery efforts and a scale looks Recessed counterbore to hide screw head Specifications: Length: 16mm (0.6 inch) Width: 13mm (0.5 inch) Thickness: 2.2mm (0.09 inch) Eyelet hole diameter: 8mm (0.3 inch) Includes: (4) aluminum tow shackles (4) socket head cap screws
Hot Racing 1/10 Scale Aluminum Orange Tow Shackle D-Rings (4) ** DISCONTINUED
Hot Racing aluminum 1/10th scale orange tow shackles (D-rings) for the Axial SCX10 Jeep AX80125 front bumper, the AX80126 rear bumper, or other custom project FEATURES: - CNC machined aluminum construction- Orange anodizing for durability, corrosion resistance, and great looks- D-rings are essential for recovery efforts and ultimate scale looks- Recessed counter bore to hide screw head YOU WILL RECEIVE: - Four (4) aluminum tow shackles- Four (4) socket head cap screws REQUIREMENTS: - Installation on vehicle SPECIFICATIONS: - Length:...