RC Car & Truck Parts

Body clips, heavy duty (12)

Compatibility:

• Traxxas Drag Slash
• Traxxas Hoss
• Traxxas M41
• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Revo Nitro
• Traxxas Rustler 2wd
• Traxxas Rustler 4x4
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas XO-1

Overview

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Key Features

Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Compatibility:

• Nitro Slash
• Slash 4X4 Platinum
• Slash 4X4 VXL
• Slash 4X4
• Slash VXL
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Accessory part for these models:
• Ford F-150 Raptor
• Slash 2WD Unassembled Kit
• Slash

This is a pack of ten Traxxas 4mm Lock Nuts and are intended for use with Traxxas vehicles.

Compatibility: 

• Traxxas Bandit
• Traxxas Drag Slash
• Traxxas Hoss
• Traxxas Jato
• Traxxas M41
• Traxxas Nitro 4-Tec
• Traxxas Nitro Slash
• Traxxas Nitro Sport
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler 2wd
• Traxxas Rustler 4x4
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Spartan
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Hot Racing EZ Pulls for 1/10 scale Cars body clips.

You will receive:
Four aluminum EZ Pulls
Eight body clips

Features:

Specifications:

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48 Original
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48 Original
• Tekno RC ET48.3
• Tekno RC SCT410 Original
• Tekno RC SCT410.3

This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. 

Features: 

• 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
• 3mm thick arm
• 27.25mm Overall length
• Linkage holes threaded for 3mm hardware
• 25T Spline Futaba/Orion/Savox/ProTek Output Shaft

Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands. 

**Compatibility with Most Trucks** 

OVERVIEW:

These high quality body clip retainers tether your body clips to your bodyshell. This means that you do not lose your clips when they become detached from the body post during a roll-over  when running your vehicle, meaning no more lost clips when you have removed your bodyshell.

FEATURES:

Produced from strong, flexible rubber to provide durability

Specially designed bodyshell grommet attaches retainer to hole in bodyshell

Large pull tab allows quick and easy body clip removal even with wet or cold hands

ARRMA branded

Supplied with large size body clips

INCLUDES:

4 x ARRMA Body Clip Retainers

4 x Large size Body Clips

1 x Fitting Instructions

Compatibility:

Arrma Felony 6S BLX
Arrma Fireteam 6S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Kraton 6S BLX
Arrma Limitless
Arrma Mojave 6S BLX
Arrma Nero 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX

Standard-duty black body clips. Sold as a pack of 12.

 Compatibility:

Body clips (12) (standard size)

 Compatibility:

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas Revo
• Traxxas Rustler
• Traxxas Stampede

Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler, Stampede, Bandit)

Compatibility:

• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body.

Compatibility:

• Traxxas 4-Tec Original
• Traxxas Bandit
• Traxxas Drag Slash
• Traxxas E-Maxx
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Revo Nitro
• Traxxas Rustler 2wd
• Traxxas S-Maxx
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Slayer
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

Nuts, 4mm flanged nylon locking (steel, serrated) (8)

Compatibility:

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Body clips, heavy duty (black) (12)

Compatibility:

• TRX-4® 1979 Chevrolet Blazer
• TRX-4® 1979 Ford Bronco
• TRX-4® Equipped with Traxx™
• TRX-4® Mercedes-Benz® G 500® 4X4²
• TRX-4® Scale and Trail™ Crawler
• TRX-4® Sport Unassembled Kit
• TRX-4® Sport
• TRX-4® Unassembled Kit
• TRX-6™ Mercedes-Benz® G 63® AMG 6X6

SPUR GEARS: Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.

Compatibility:

• Bigfoot® No. 1 Officially Licensed Replica
• Ford F-150 Raptor
• Rustler®
• Slash 2WD Unassembled Kit
• Slash
• Stampede®
• Accessory part for these models:
• Bandit VXL
• Drag Slash
• Rustler® VXL
• Slash VXL
• Stampede® VXL
• Bandit

Wheel hubs, hex (2)/ stub axle pins (2)

Compatibility:

• Bigfoot® No. 1 Officially Licensed Replica
• Drag Slash
• Ford F-150 Raptor
• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Jato
• Nitro Rustler
• Nitro Slash
• Rustler® 4X4 VXL
• Rustler® 4X4
• Rustler® VXL
• Rustler®
• Slash 2WD Unassembled Kit
• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• Slash 4X4 VXL
• Slash 4X4
• Slash VXL
• Slash
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Stampede® VXL
• Stampede®

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Compatibility:

• Traxxas Rally
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

Not only are these aluminum hex wheel hubs as tough as nails, they’re blue-anodized to make your ride look even sharper! Traxxas machines them for the highest precision and incredible detail.

Compatibility:

• Traxxas 4-Tec
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

This is a pack of six replacement Traxxas 3x12mm Shoulder Screws. These are the screws used with Traxxas Ultra shocks. 

Compatibility:

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48 Original
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48 Original
• Tekno RC ET48.3
• Tekno RC SCT410 Original
• Tekno RC SCT410.3

This is a Team Losi Racing Aluminum Servo Horn, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

• Losi 22
• Losi 22 2.0
• Losi 22 3.0
• Losi 22 3.0 SPEC-Racer
• Losi 22SCT
• Losi 22SCT 3.0
• Losi 22T
• Losi 22T 2.0
• Losi TEN-SCTE 3.0

Drivers routinely search for the ultimate aero package on the 1/8th off-road scene and JConcepts is directly on top of the latest trends with the release of the F2I rear wing. F2I relates to Finnisher related items morphing into a 2nd generation and this new wing fits the bill perfectly. Adding the “I” relates to it being IFMAR competition legal in terms of its side-dams being large enough to comply with rules and procedure on the world-wide racing scene.

Aerodynamics are quite the buzz and the design of the wing is rather traditional with a flat base. Across the width, the 5 individual dividers add straight-line stability and connects the upper and lower deck. Drop louvers on each side split the deck-height funneling air flow through the core and up to the gurney. The industry first design featuring a built-in gurney eliminates the need to add additional pieces, hardware or items which are clumsy.

As with all JConcepts injection molded wings, the side dams are recessed for decals to rest without being exposed directly across its plane. The offset decal plane also provides some stability to the highly impacted area and removes a slight about of weight. To make mounting easier, JConcepts has added a handy grid area underneath to help position the wing side to side and fore and aft for the utmost versatility.

At the races the F2I wing debuted at The Dirt Nitro Challenge in Perris, California. The new wing sat on the TQ vehicles of Dakotah Phend (1/8th E-Buggy and 1/8th Truck) and on the all-important 1/8th Nitro buggy TQ’s vehicle, Seth VanDalen. When the dust settled, it was Ryan Maifield taking the victory in the 1/8th Truck class making the F2I wing a winner at its first event.

Features:

• JConcepts flat base, split deck design
• 5 center dividers across wing width
• Industry first built-in gurney
• Recessed, IFMAR legal side-dams
• Light-weight design and materials
• Molded grid located on the bottom to guide user attachment

Overview
Extra Hard Steel 5mm Bore (1.0 module) Brushless Motor Pinions. One 4x4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. These pinions mate with most 1/8 scale nitro spur gears.

Specs
Gear Pitch 1.0 Module
Gear Type Pinion
Material Steel

This is a replacement Losi Rear Bumper Set, and is intended for use with the Losi TEN-SCTE.

Compatibility:

• Losi TEN Rally X
• Losi TEN-SCT Nitro
• Losi TEN-SCTE
• Losi TEN-SCTE 2.0
• Losi TEN-SCTE 3.0

PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Compatibility:

• Traxxas Drag Slash
• Traxxas Hoss
• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Revo Nitro
• Traxxas Rustler 2wd
• Traxxas Rustler 4x4
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

Compatibility:

• Traxxas Jato
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas S-Maxx
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas T-Maxx

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features:

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48 Original
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48 Original
• Tekno RC ET48.3
• Tekno RC SCT410 Original
• Tekno RC SCT410.3