RC Tools & Accessories

This is a 3oz can of polycarbonate spray paint from Tamiya. These spray paints were developed especially for decorating transparent polycarbonate (Lexan) bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing a model. Small detail work should be brush painted beforehand using Tamiya bottle paints for polycarbonate. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. These paints are impervious...

This is Pro-Line's Tire Glue. Pro-Line knows tires and understands that the strongest bond possible between the Tire and Wheel is a critical aspect of performance and tire longevity.The first challenge was developing the strongest glue possible while also having the correct flow characteristics and dry time that RC Racers and Bashers desire. Pro-Line’s new Tire Glue has a Hold Strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest Strength of any Tire...

The RC4 (3-wire) transponder is the latest in the line of transponders from MyLaps. The RC4 transponder supports car ID numbers so you can have the same transponder number in all your cars, with a different ID for each. The RC4 transponder also gives additional telemetry data such as voltage to the transponder and transponder temperature each time the loop is crossed. This transponder will only work on RC4 decoder boxes with version 4 firmware or higher.

Polyurethane Mix Additive 2oz 2oz Polyurethane Mix Additive Add just a couple drops of the Polyurethane to your thinned paint.  Just one or two drops is all you need.   The Poly greatly increases flow from your airbrush on top of the already amazing flow and leveling of the paint.   The results are further leveling , durability , increased sanding capabilities and will also add a very light eggshell finish.     When spraying straight from the bottle with out...

AKA Premium Tire Glue is best in the industry bar none. We know because we can't keep it in stock. This medium viscosity CA glue has been formulated to bond plastic to rubber and it does with tenacity. As with any CA glue, we suggest that you store your bottle of Premium Tire Glue in a cool dry place such as a refrigerator to keep it fresh.

This is the Pro-Line Flo-Tek Pre-Cut Fusion Short Course Body, for use with most 1/10 scale short course trucks like the Slash, Slash 4x4, SC5M, HPI Blitz, Pro-Line PRO-2, TEN-SCTE 4WD and 22SCT. What do you get when you fuse together the best features from the most successful Short Course body of all-time (Flo-Tek) and the most aerodynamically advanced race body ever conceived (EVO)? You get the Flo-Tek Fusion Body! The Fusion features large vent holes in the front, middle...

This is a set of three Dynamite Metric Machined Aluminum Handle Hex Drivers. These hardened steel-tipped tools will last a long time. Their comfortable-grip red anodized handles are flat on one side so they won't roll off the workbench. Replacement tips are available in all sizes.Features: Includes 1.5mm, 2mm, and 2.5mm Hex Drivers Hardened Steel Replaceable Tips Comfortable Knurled Aluminum Handle

This is the MIP Metric Speed Tip Hex Driver Power Tool Tip Set. For all those that suffer from carpel tunnel, strained wrists, or pure laziness, MIP has the remedy to your RC wrenching ailments! MIP Speed Tip wrench package including the most popular sizes for Metric sized hex-head screws. MIP Speed Tip Wrenches are designed to be used in standard 1/4 inch hex chuck with adjustable clutch, so they will work with just about any capable power drill or...

Losi's Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles. The rugged construction ensures the gauge will not fail or break easily, while clear markings make the gauge easy to read and use. Key Features: Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles Rugged construction ensures the gauge will not fail or break easily Clear markings make the gauge easy to read and use  Compatibility: Losi 22SCT Losi 22T Losi 22T 2.0 Losi 5IVE-T 2.0...

This is an MIP 1.5mm Thorp Hex Driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue. NOTE: MIP stands behind every wrench and hex driver! MIP quality assurance promises that all wrenches and hex drivers are free from defects in workmanship. In the rare case that a defect is found,...

ToolkitRC AC Power Adapter 180W Output Power XT60 Plug 19.5V 9.23A for RC LiPo Battery Charger Balance Like iSDT DC Charger Ideal for most pocket chargers on the market today the ToolKitRC ADP-180MB features 180w of Power output with an XT60 connector ready to plug in to the M8, M8s or M6 charger series.   he ADP-180MB is compatible with most popular brands like iSDT, GT Power, Hota RC and any charger with an XT60 input.   Specs: Model: ADP-180MB...

The Toolkit RC M6 is the a small 150w color screen charger! At heart, the M6 is a small and compact charger, but boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, watt meter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current. Toolkit M6 Features: Battery Charger Cell Checker Servo Tester PWM,PPM,...

This is a 1:8 Car Stand. Pro-Line is excited to release an all-new MX inspired car stand for all Pro-Line fans! Taking its inspiration from the popular MX bike stands, the Laser Cut, bent and Powder-Coated Blue Alloy Pro-Line car stand is ready to display your car in the best way possible. The stand even has shock building holes for added versatility. Included Push-in rubber grommets protect your chassis and will prevent your car from sliding around. The best thing...

This is an MIP 2.0mm Thorp Hex Driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue. NOTE: MIP stands behind every wrench and hex driver! MIP quality assurance promises that all wrenches and hex drivers are free from defects in workmanship. In the rare case that a defect is found,...

This is a sixteen ounce bottle of Bittydesign Liquid Mask. Bittydesign Liquid Mask will save you time and help you produce a better finished product. This 16 ounce bottle will cover approximately ten 1/8 buggy bodies.      

This is the Team Losi Racing Turnbuckle Wrench. This hard-anodized turnbuckle wrench can be used to adjust 3.5mm, 4mm and 5mm diameter turnbuckles. Lightweight and durable this wrench is a essential part of every racer's toolbox. Features:  Lightweight and durable Hard-anodized Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 SPEC-Racer Losi 22SCT Losi 22SCT 3.0 Losi 22T Losi 22T 2.0 Losi 8IGHT Losi 8IGHT 2.0 Losi 8IGHT 3.0 Losi 8IGHT 4.0 Losi 8IGHT-E Losi 8IGHT-E 2.0 Losi 8IGHT-E 4.0 Losi...

This Tekno RC 1/8 High Down Force Buggy Wing is white color and is ROAR/IFMAR approved. This wing features updated smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions, making it easier than ever to adjust the Tekno RC wing to your liking. This item replaces: TKR5037 – Wing (white) Compatibility: Tekno RC EB48 Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Tekno RC EB48SL Tekno RC...

This is a bottle of JConcepts Advanced Formulated Tire Glue. Tire gluing security is now only one step away with the release of the JConcepts Advanced Formulated Tire Glue. Available in a medium viscosity, the advanced formulated glue has proven to be a winner on and off the track with its incredible tack security, packaging and contents. The sealed package contains glue, gluing tip applicator, strip decal and desiccant pack for freshness. Gluing tires is an art form, having the...

This is the ProTek R/C "TruTorque" Shock Shaft Pliers. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of...

This is the ProTek R/C "TruTorque" Body Reamer. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable,...

This is the HB Racing 1/8 Rear Plastic Wing in White color. This wing has no mounting holes and requires you to create your own. One wickerbill and hardware included. Compatibility: HB Racing D817 V2 HB Racing E817 V2

This is a 1:10 Car Stand.  Pro-Line is excited to release an all-new MX inspired car stand for all of the Pro-Line fans! Taking inspiration from the popular MX bike stands, the Laser Cut, bent and Powder-Coated Blue Alloy Pro-Line car stand is ready to display your car in the best way possible. The stand even has shock building holes for added versatility. Included Push-in rubber grommets protect your chassis and will prevent your car from sliding around. The best...

This is a set of Team Losi Racing Shock Shaft Pliers. These hard-anodized pliers can be used to hold shock shafts in sizes 1/8th inch, 3.0mm, 3.5mm, and 4mm. Features:  Holds shock shafts with 1/8th inch, 3.0mm, 3.5mm, and 4mm diameters Hard anodized  Compatibility: Losi 22 Losi 22 2.0 Losi 22 3.0 SPEC-Racer Losi 22SCT Losi 22SCT 3.0 Losi 22T Losi 22T 2.0 Losi 810 Losi 8IGHT Losi 8IGHT 2.0 Losi 8IGHT 3.0 Losi 8IGHT 4.0 Losi 8IGHT-E Losi 8IGHT-E 2.0...

This is a Tekno RC Hardened Steel Turnbuckle Wrench, with 4mm and 5mm ends. The current crop of aluminum turnbuckle wrenches wear out easily and are bulky to compensate for their weakness. This makes it hard to fit into tight places. There are more durable steel wrenches out there too, but they are expensive and can be uncomfortable to use. So the guys at Tekno made a hardened steel turnbuckle wrench that is durable, fits into the tightest places, and is...

This is a MIP Thorp 2.5mm ball end hex driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue. NOTE: MIP stands behind every wrench and hex driver! MIP quality assurance promises that all wrenches and hex drivers are free from defects in workmanship. In the rare case that a...

This is an MIP 3.0mm Thorp Hex Driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue. NOTE: MIP stands behind every wrench and hex driver! MIP quality assurance promises that all wrenches and hex drivers are free from defects in workmanship. In the rare case that a defect is found,...

This is a set of two Dynamite Lexan Scissors. One set is curved, for cutting curves like wheel well openings, and body radii. The other set is straight, for cutting straight lines. Both sets of scissors are intended to be used for cutting lexan plastic.

Tire organization is key and especially in 1/10th off-road when wear and tire prep methods must be closely monitored at all times.  JConcepts introduces the new tire sticks which allow a driver to neatly group sets of front and rear tires together.  With availability in blue or black colors, the tire sticks can make an eye popping appearance in the pits or tucked away nicely in storage or racing bags. The tire sticks operate with 2 separate pieces that are designed...

This is a MIP Thorp Standard Hex Driver Wrench Set. This MIP Hex Driver wrench package includes the most popular sizes for SAE sized hex-head screws. As the exclusive manufacturer, MIP has worked very closely with John Thorp to produce some of the best wrenches in the hobby industry. For the most reliable tool to tackle hex-head screws, get the wrench pack that will last a lifetime. Features: Highest quality hex drivers! Precision CNC ground IN-HOUSE from hardened US Tool...