Racing Parts

This is a set of two replacement hardened extra long shock shafts from Traxxas.

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a pack of two Traxxas Assembled GTR XX-Long Shocks, for use with the Slash 4x4 and Rustler 4x4. These shocks are blue anodized, feature PTFE-coated bodies with TiN shafts and are ready for installation.

Shock springs not included.

Compatibility:

• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate

This is a pack of two Traxxas GTR XX-Long Hard Anodized Shocks. These shocks feature PTFE coated bodies and Ti-Nitride coated shafts, and have been pre-assembled for your convenience. Package includes two shocks, and shock oil, but does not include shock springs. 

Compatibility:

• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

Spring, shock, white (GTR long) (0.623 rate orange) (1 pair)

Compatibility:

• Rustler® 4X4
• Slash 4X4 VXL
• Slash 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Hoss™ 4X4 VXL
• Rustler® 4X4 VXL
• Slash 4X4 Platinum
• Slash 4X4 Ultimate

This is a pack of replacement shock rebuild parts for the GTR shocks (either the stock ones or the hard anodized ones). Included are shock bladders, bump stops, shock ends internal shock O-rings and shock pistons. Everything needed to renew two shocks is included, except the shock shafts.

Compatibility:

• Traxxas E-Revo VXL 2.0
• Traxxas Nitro Slash
• Traxxas Revo
• Traxxas XO-1

This is a pack of two Traxxas GTR Long Hard Anodized Shocks. These shocks feature PTFE coated bodies and Ti-Nitride coated shafts, and have been pre-assembled for your convenience. Package includes two shocks, and shock oil, but does not include shock springs.

Compatibility:

• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Compatibility:

• Slash 4X4 Ultimate
• Rustler® 4X4
• Slash 4X4 VXL
• Slash 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Hoss™ 4X4 VXL
• Rustler® 4X4 VXL

This is an optional Traxxas GTR Hard Anodized Teflon Coated Shock Body. Hard-anodized and PTFE-coated aluminum shock bodies reduce internal friction for smoother shock performance. The hard-anodizing makes the contact surfaces more durable for longer life.

Compatibility:

• Traxxas E-Revo
• Traxxas E-Revo VXL 2.0
• Traxxas Revo
• Traxxas Slayer
• Traxxas Summit
• Traxxas XO-1

This is a replacement glow plug lead from Traxxas. This is the lead that goes from the EZ start quick connector harness to the glow plug on the engine.

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede

This is a replacement Traxxas Gear/Motor Cover, and is intended for use with the Traxxas Slash 4x4 short course truck.

Compatibility:

• Traxxas Hoss
• Traxxas Slash 4x4
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a replacement Traxxas Gear Cover, and is intended for use with the Traxxas 1/10 Rally.

Compatibility:

• Traxxas Hoss
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

This is a replacement Traxxas Front Suspension Arm Set. 

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a replacement front shock tower from Traxxas. This shock tower mounts to the front bulkhead, and provides the upper mounting point for the shocks.

Compatibility:

• Traxxas Nitro Stampede
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a pack of two replacement Traxxas Front Hex Wheel Hubs. This package also includes two axle pins. 

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.

Compatibility:

Traxxas front drive belt is constructed of rubber and black in color. 76 grooves (teeth).

Includes: One front drive belt for the Traxxas Nitro 4-Tec and the Nitro 4-Tec Pro touring cars

Requires:Installation onto the kit

Specs:

Length: 4-3/8" (111mm)
Width: 3-16" (4.5mm)

CAR PARTS:Driveline Components

This is a replacement Traxxas Front Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck.

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas XO-1

This is a replacement Traxxas Front Constant Velocity Stub Axle, and is intended for use with the Traxxas 1/10 Rally Racer and Slash 4x4 Ultimate 1/10 scale vehicles.

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

This is a replacement Traxxas  Front Bumper & Bumper Mount, and is intended for use with the Traxxas Slash 4x4 short course truck. 

Compatibility:

• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate

This is a replacement front bumper from Traxxas.

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rustler
• Traxxas Stampede

Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to stock Slash springs and are ideal for all nitro and electric Rustler and Stampede applications, as well as Bandit and Nitro Sport. Two spring lengths are offered for front and rear applications.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Slash
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a pack of two replacement Traxxas Front Axles. 

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware

Compatibility:

• Ford F-150 Raptor
• Nitro Rustler
• Nitro Slash
• Rustler® VXL
• Rustler®
• Slash 2WD Unassembled Kit
• Slash VXL
• Slash

This is the Skidplate, Front (Angled by Traxxas)

This is a replacement Traxxas Foam Bumper, and is intended for use with the Traxxas 1/10 Rally Racer. 

Compatibility:

• Traxxas Rally

These are the Foam Body Washers from Traxxas.

Nuts, 4mm flanged nylon locking (steel, serrated) (8)

Compatibility:

• Traxxas 1/16 E-Revo
• Traxxas 1/16 Mustang
• Traxxas 1/16 Race Truck
• Traxxas 1/16 Rally
• Traxxas 1/16 Slash
• Traxxas 1/16 Summit
• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a replacement Traxxas External Steel-Splined Constant Velocity Half Shaft, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement works on both the front and rear, and both the left and right side.

Complete Driveshaft Replacement:

• TRA6451 Front Driveshaft
  
• TRA6452 Rear Driveshaft

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas XO-1

This is a replacement dust cover from Traxxas. This dust cover goes over the spur, and pinion gears to keep dirt out of them.

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Shock tower, rear

Compatibility:

• Drag Slash

Compatibility:

• DRAG SLASH RTR

This is a replacement Traxxas Differential Ring Gear and Pinion Gear Set. 

Compatibility:

• Traxxas Hoss
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas XO-1

This is a set of two replacement hardened steel differential output yokes from Traxxas.

Compatibility:

• Traxxas Bandit
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a pack of two replacement Traxxas VXL Differential Output Yokes. Package includes two diff output yokes, two 3x5mm countersunk screws and two screw pins. 

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement works on both the front and rear, and both the left and right side.

Complete Driveshaft Replacement:

• TRA6451 Front Driveshaft
  
• TRA6452 Rear Driveshaft

Compatibility:

• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate

Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

Compatibility:

• Traxxas Hoss
• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Telluride 4x4
• Traxxas XO-1

Ring gear, differential/ pinion gear, differential (rear)

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4
• Traxxas XO-1

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

Compatibility:

• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Revo
• Rustler® 4X4 VXL
• Rustler® 4X4
• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• Slash 4X4 VXL
• Slash 4X4
• Slayer Pro 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Summit
• T-Maxx
• XO-1®

This is a replacement differential case and gaskets for the Traxxas Revo monster trucks. This is the main differential case that is used to house the internal gears for the front or rear differential on the Revo monster trucks.

Compatibility:

• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)

Compatibility:

• Traxxas Hoss
• Traxxas Rustler 4x4
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4

Crystal-clear plastic gear cover is just as durable as the stock cover, but lets you see the gear mesh for easy, no-tool inspection. It's also the perfect accessory for showing off the optional Aluminum Motor Mount, sold separately (6860x).

Compatibility:

• Slash 4X4 VXL
• Slash 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4

This is a replacement control box for the EZ-start 2 starting system for Traxxas Vehicles, including the Traxxas Revo.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Revo

Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Slash 2WD, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.

Compatibility:

• Slash VXL
• Slash

This is a replacement set of clutch shoes with spring from Traxxas. These are the clutch shoes that engage the clutch bell to make the vehicle move.

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede

This is a replacement Traxxas Grey Chassis. This chassis is also available in black (TRA5822A).

Compatibility:

• Traxxas Slash

Cover, center driveshaft (clear)

Compatibility:

• Traxxas Slash 4x4

This is a replacement Traxxas Center Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. 

Compatibility:

• Traxxas Rally
• Traxxas Rustler 4x4
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Caster blocks (c-hubs), left & right

Compatibility:

• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Rustler® 4X4 VXL
• Rustler® 4X4
• Slash 4X4 VXL
• Slash 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• XO-1®

Aluminum caps, pivot ball (threaded aluminum, hard-anodized with PTFE-coating) (8)/ hex wrench, 5mm

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Compatibility:

Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to Rustler and Stampede. These turnbuckles come in a fire-red or brilliant blue-anodized finish for stunning good looks. The camber kit includes a matching 5mm aluminum wrench that prevents marring the finish. Traxxas aluminum toe links are lighter than the stock steel turnbuckles, and are 35% lighter than titanium. High-grade 7075-T6 aluminum ensures increased bending stiffness. Camber set fits both Rustler and Stampede. Separate tie rod sets are available for each. All camber/tie rod sets and single replacements come assembled with rod ends & hollow balls.

Compatibility:

• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Bulkhead, front

Compatibility:

• Traxxas Slash 4x4
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Bulkhead (front) (black)

Compatibility:

• Traxxas Nitro Slash
• Traxxas Nitro Sport
• Traxxas Nitro Stampede
• Traxxas Rustler
• Traxxas Slash
• Traxxas Stampede

Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body.

Compatibility:

• Traxxas 4-Tec Original
• Traxxas Bandit
• Traxxas Drag Slash
• Traxxas E-Maxx
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Revo Nitro
• Traxxas Rustler 2wd
• Traxxas S-Maxx
• Traxxas Slash 2wd
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Slayer
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)

Compatibility:

• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate

This is a replacement Traxxas Body Mount Post Set, and is intended for use with the Traxxas X0-1. These can be used in the front or rear position.

Compatibility:

• Traxxas Rally
• Traxxas XO-1

This is the Body Bumper, Foam (Low Pr by Traxxas)

This is a replacement Traxxas Aluminum Wheelie Bar Wheel Set, and is intended for use with the Traxxas Wheelie Bar Assembly. The precision 6061-T6 aluminum wheels feature a stunning anodized finish and they ride on rubber-sealed 5x8mm ball bearings. For controllable and seemingly never-ending wheelies, Traxxas developed a durable, soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies. The rubber tires are available separately and they also install on the stock nylon wheels.

Compatibility:

• Traxxas Bandit
• Traxxas Rustler 2wd
• Traxxas Slash 2wd
• Traxxas Stampede 2wd
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, PTFE-coated and have large cylinders for greater oil capacity. These shocks also include our super smooth, long wearing titanium nitride (TiN) coated shock shafts. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

Compatibility:

• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas Nitro Rustler
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas S-Maxx
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, PTFE-coated and have large cylinders for greater oil capacity. These shocks also include our super smooth, long wearing titanium nitride (TiN) coated shock shafts. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

Compatibility:

• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Rustler® 4X4 VXL
• Rustler® 4X4
• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• Slash 4X4 VXL
• Slash 4X4
• Slash
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Bandit VXL
• Bandit
• Bigfoot® No. 1 Officially Licensed Replica
• Drag Slash
• Ford F-150 Raptor
• Nitro Rustler
• Nitro Slash
• Rustler® VXL
• Rustler®
• Slash 2WD Unassembled Kit
• Slash VXL
• Slash
• Stampede® VXL
• Stampede®

Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)

Compatibility:

• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Rustler
• Traxxas Rustler 4x4
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas Telluride 4x4

This is a steering bell crank set from Traxxas.

Compatibility:

• Traxxas 4-Tec

Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)

Compatibility:

• Traxxas Bandit
• Traxxas Nitro Slash
• Traxxas Rustler
• Traxxas Slash

This is a replacement set of Traxxas Battery Hold Down's and is intended for the Traxxas XO-1.

Compatibility:

• Traxxas XO-1

Battery hold-down plate (grey) / metal posts (2) / body clips (2)

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash

This is a replacement battery hold down plate with posts, and clips from Traxxas.

Compatibility:

• Traxxas Bandit
• Traxxas Rustler
• Traxxas Slash

This extended battery hold down for the Slash 2WD (standard or LCG) or Slash 4x4 (standard only) allows for LiPo packs of up to 42mm tall to fit in the stock battery tray.

Compatibility:

• Slash 4X4 VXL
• Slash 4X4
• Drag Slash
• Ford F-150 Raptor
• Slash 2WD Unassembled Kit
• Slash VXL
• Slash

Axle, wheelie bar, charcoal gray (aluminum)

Compatibility:

• Drag Slash