Team Associated Front Upper Arm Set w/Caster Inserts
This is a replacement Team Associated Front Upper Arm Set, intended for use with the Team Associated RC8B3 Nitro Buggy. This set includes one left and one right side arm, plus upper hinge pin inserts that allow the caster to be adjusted by moving the upper arm back and forth.
Note:These arms are directional, with a right and left side.
This is a replacement Team Associated Front Arm Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right side arm, as well as two plastic arm spacers. These arms are directional!
Team Associated Factory Team Aluminum Servo Horn (25T-Futaba/Savox/ProTek)
The Team Associated Factory Team Aluminum Servo Horn was developed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e models. These machined aluminum servo horns are stronger than the stock plastic horns that come with most servos and due to the slightly shorter length, they provide a smoother steering feel and decrease the load on the servo. 25T fits Futaba, XP Digital, Reedy, Savox and ProTek servos.
7075 T6 aluminum
Clamping style with large m2.5 screw
Length 18.5mm for smoother steering response and less stress on the servo
Laser etched spline size
Fits Futaba, XP Digital, Reedy, Savox and ProTek servos
Team Associated Factory Team Aluminum 48P Pinion Gear (3.17mm Bore) (18T)
Team Associated Factory Team Aluminum 48P Pinion Gears are a great option to replace any standard 48 pitch pinion gear with a lightweight, hard-anodized aluminum variant. These pinions offer a slight weight savings, quicker identification, and longer life compared to a standard pinion.
Factory Team upgrade
Lightweight 7075-T6 aluminum
Hard anodized for long life
Two set-screw holes
Laser-etched tooth count
Available in 17 through 35 tooth count options
Larger sizes (30 and up) have holes for weight reduction
Team Associated Factory Team 15.5mm Aluminum Servo Horn (25T)
Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos.
This is a pack of eight replacement differential shims for the Team Associated off-road buggy. These are the small shims used to shim the side to side position of the front and rear differentials within the bulkheads, to adjust the backlash between the differential crown gears and the small pinion gear connecting the center drive shaft.