Racing

Body clips, heavy duty (12)

Compatibility:

• Bandit VXL
• Bandit
• Bigfoot® No. 1 Officially Licensed Replica
• DCB M41 Widebody
• Drag Slash
• Ford F-150 Raptor
• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Nitro Slash
• Revo
• Rustler® 4X4 VXL
• Rustler® 4X4
• Rustler® VXL
• Slash 2WD Unassembled Kit
• Slash 4X4 Platinum
• Slash 4X4 Ultimate
• Slash 4X4 VXL
• Slash 4X4
• Slash VXL
• Slash
• Slayer Pro 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Stampede® VXL
• Summit
• T-Maxx
• Rustler®
• Stampede®
• TRX-4® 1979 Chevrolet Blazer
• TRX-4® 1979 Ford Bronco
• TRX-4® 2021 Ford Bronco
• TRX-4® Equipped with Traxx™
• TRX-4® Mercedes-Benz® G 500® 4X4²
• TRX-4® Scale and Trail™ Crawler
• TRX-4® Sport Unassembled Kit
• TRX-4® Sport
• TRX-4® Unassembled Kit
• TRX-6™ Mercedes-Benz® G 63® AMG 6X6

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features: 

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48
• Tekno RC ET48.3
• Tekno RC SCT410
• Tekno RC SCT410.3

This is a set of four Velocity V2 1/8th scale buggy wheels from Pro-Line. The phrase “bigger is better,” as we have all heard time and time again couldn’t be further from the truth with the new Velocity V2 wheels by Pro-Line. Larger in diameter and width the V2 wheels give your car more traction and stability. 

The V2’s are 1.3mm wider and 3mm taller than the traditional size 1:8 wheels. All this transfers into a stiffer sidewall for less sidewall flex enhancing stability and connectivity with your 1:8 buggy. This is achieved by using the same size 1:8 tires that you use now. Simply stretch standard tires over the V2 wheels and you’re ready to go. 

Additional features include an integrated hot runner system when the wheel is produced. This allows the wheel to be molded to the tightest of tolerances and the ultimate in trueness. Accept no imitations on materials used either. The V2’s along with all Pro-Line wheels are molded from the Dupont nylon, the highest standards in nylon material in the market. Pro-Line Velocity V2’s, the latest in wheel technology from a company that has over 25 years of mold design, mold making, and product production.

• Designed for Maximum Performance
• Futuristic Directional Tread Design
• Angled Connected Bars for Maximum Forward Bite & Unmatched Corner Speed
• Improved tire wear over previous race tires
• Tune Performance by Choosing Tire Direction
• Outlast the Competition
• Made in the USA, since 1982

• (2) Positron 1:8 Buggy Tires
• (2) Closed Foam Inserts 

• Ground up Design for Maximum Performance
• Futuristic Directional Tread Design
• Angled Connected Bars for Maximum Forward Bite & Unmatched Corner Speed
• Improved Tire Wear Over Previous Race Tires
• Tune Performance by Choosing Tire Direction
• Outlast the Competition
• Made in the USA, since 1982

Specifications: 
Height: 4.16" (106mm) 
Width: 1.81" (46mm) 

Includes: 

• (2) Positron SC Tires
• (2) Closed Cell Foam Inserts 

Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck.

Compatibility:

• Bandit VXL
• Bandit
• Bigfoot® No. 1 Officially Licensed Replica
• DCB M41 Widebody
• Drag Slash
• Ford F-150 Raptor
• Ford Fiesta® ST Rally
• Hoss™ 4X4 VXL
• Jato
• Nitro Rustler
• Nitro Slash
• Rustler® 4X4 VXL
• Rustler® VXL
• Rustler®
• Slash 2WD Unassembled Kit
• Slash 4X4 Platinum
• Slash 4X4 VXL
• Slash 4X4
• Slash VXL
• Slash
• Spartan
• Stampede® VXL
• Stampede®
• Rustler® 4X4
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features: 

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48
• Tekno RC ET48.3
• Tekno RC SCT410
• Tekno RC SCT410.3

This is the 1/10 scale Traxxas Slash 2WD with a Traxxas TQ 2.4GHz Radio, XL-5 ESC, and Titan 12-T 550 Modified Motor included, see required items below. The award-winning Traxxas Slash 2WD puts you in the driver's seat for intense fender-to-fender, high-flying off-road action. This full-scale Short-Course Race Truck truly embodies the spirit of Traxxas R/C, with its extreme 900+ horsepower racing engines, dirt-roosting power slides, Supercross-style big-air jumps and giant suspension travel. The all new Traxxas Slash 2WD brings all of the action home so that you can experience the head-to-head high-speed competition in your own backyard or at the local track.

The Traxxas Slash 2WD is now LiPo-ready, now including built-in Low-Voltage Detection! The Slash 2WD comes equipped with Traxxas' exclusive sealed, watertight electronics, which provides you with the freedom to drive where you want to; through mud, water, snow, and other wet-running conditions that were never before possible. The all new Slash 2WD is brushless ready, with full ball bearings, a waterproof digital steering servo, metal gear transmission, planetary gear differential, Torque-Control slipper, and high-quality metal turnbuckles. The Traxxas Slash 2WD is fully assembled and Ready-To-Race for immediate out-of-the-box racing fun!

The Traxxas Slash 2WD comes equipped with the Traxxas TQ 2.4GHz radio system. The TQ's modern design features an ergonomic grip for all-day driving comfort and an internal antenna for a sleek look. 2.4GHz technology means that you'll never have to worry about frequency conflicts, no matter how many others you're racing with. Simply switch on and drive - the TQ automatically locates and locks on to an open frequency.

Requires:

• Battery: 7.2V 6-Cell or 8.4V 7-Cell NiMH Battery Pack
• Charger: Compatible Battery Charger
• (4) AA Batteries for Transmitter

Includes:

• One 1/10 Scale Traxxas Slash 2WD RTR Truck
• One XL-5 Electronic Speed Control
• Titan 12 Turn 550 Motor
• TQ 2.4GHz Radio System
• Quick Start Guide
• Accessory Pinion Gear, 
• Quality Tool Set

Please Note: Body color/design may differ from image shown. You may not receive the color or design as shown on the image above as they are chosen randomly at the time of shipment.
If you would like a specific body please add a comment on the checkout page. We will do our best to honor your request. If the color you request is not available we will move to a second available choice if provided or send what we have available at the time of shipment.

Features:

• ProGraphix multi-colored painted body is available in red, blue, red/silver, and blue/silver
• Scale dimensions and looks of actual short course off-road race trucks
• Powerful Titan 12T 550 modified motor with internal cooling fan
• Race in dirt, mud, water, and snow thanks to Traxxas innovative water-sealed electronics
• Innovative watersealed design
• Forward/reverse/brake
• EZ-Set push-button setup
• LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection
• Three easy-to-program drive profiles
• High efficiency MOSFET transistors
• Backed by the Traxxas Lifetime Electronics Warranty
• Digital high-torque waterproof steering servo
• O-ring sealed watertight receiver box keeps the micro receiver dry
• Long-wheelbase fiber-composite monocoque chassis
• Over 3.5 inches of ground clearance
• Adjustable battery hold down accepts 6- and 7-cell flat packs and 7-cell hump packs
• Scale front and rear tube-style bumpers
• Efficient Magnum 272 metal-gear transmission with ball bearings
• Revo-Spec Torque-Control slipper clutch system
• Reliable composite planetary gear differential with a steel ring gear
• Adjustable steel Jato-Style turnbuckles and captured rod ends
• Precision hex hardware throughout
• Fully adjustable Ultra Shocks with X-ring technology
• Scale all-terrain front and rear tires offer superior on- and off-road traction
• Slash is backed by unparalleled Traxxas support and parts availability
• The Slash reaches speeds in excess of 30mph using the included optional 23-tooth pinion gear and accessory 7-cell Power Cell battery (sold separately)*
• TQ 2.4GHz Radio System
• XL-5 Waterproof Electronic Speed Control
• High current handling
• Smooth high-frequency control
• Thermal shutdown protection
• Integrated on-off button
• Equipped with Traxxas High-Current Connectors
• Traxxas High-Current Connector
• 125 oz-in of torque and 0.16-second speed
• Speed control and receiver are securely fastened to chassis
• 13.2 inch wheelbase
• Easy access battery compartment
• Chassis nerf bars absorb impact and support the body
• New body mounts incorporate reinforced washers for additional body support
• Sealed gearbox protects the transmission with beefed up motor guard for extra protection
• External gear cover with easy slipper access
• Heavy-duty telescoping U-joint driveshafts and yokes
• Captured rod ends won't pop off for superior durability
• Efficient rubber-sealed ball bearings
• Progressive rate white powder coated shock springs feature a race-tuned responsive spring rate
• The tires include performance foam inserts and they come pre-glued on satin-finish 2.2" Slash wheels

Specs:

Length: 22.36" (568mm)
Front Track: 11.65" (296mm)
Rear Track: 11.65" (296mm)
Weight: 76.2oz (2.16kg)
Height (overall): 8.425" (214mm)
Wheelbase: 13.2" (335mm)
Front Shock Length: Long
Rear Shock Length: XXLong
Front Tires: Slash 2.2"
Rear Tires: Slash 2.2"
Front Wheels: 2.2" Satin-Finish
Rear Wheels: 2.2" Satin-Finish
Speed Control Type: Waterproof XL-5 ESC with low-voltage detection
Motor (electric): Titan 12T 550 (12-turn)
Gear Ratio (internal): 2.72 (final drive: 12.58)
Differential Type: Steel Composite Planetary
Gear Pitch: 48-Pitch
Transmission: Metal Gear Magnum 272
Steering: Bellcrank
Chassis Type: Modified Tub
Chassis Material: Composite Nylon
Center Ground Clearance: 3.5 inches (89mm)
Top Speed: 30+mph
Skill Level: 1
Radio System: TQ 2.4GHz Radio System (2-channel)
Battery Tray Dimensions: 165mm x 49.5mm x 23mm, 25mm
Required Batteries: 4 "AA" (transmitter), Traxxas Power Cell Battery (7-cell NiMH or 2-cell LiPo)

Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Compatibility:

• Nitro Slash
• Slash 4X4 Platinum
• Slash 4X4 VXL
• Slash 4X4
• Slash VXL
• Stampede® 4X4 Unassembled Kit
• Stampede® 4X4 VXL
• Stampede® 4X4
• Accessory part for these models:
• Ford F-150 Raptor
• Slash 2WD Unassembled Kit
• Slash

This is a set of four Velocity V2 1/8th scale buggy wheels from Pro-Line. The phrase “bigger is better,” as we have all heard time and time again couldn’t be further from the truth with the new Velocity V2 wheels by Pro-Line. Larger in diameter and width the V2 wheels give your car more traction and stability. 

The V2’s are 1.3mm wider and 3mm taller than the traditional size 1:8 wheels. All this transfers into a stiffer sidewall for less sidewall flex enhancing stability and connectivity with your 1:8 buggy. This is achieved by using the same size 1:8 tires that you use now. Simply stretch standard tires over the V2 wheels and you’re ready to go. 

Additional features include an integrated hot runner system when the wheel is produced. This allows the wheel to be molded to the tightest of tolerances and the ultimate in trueness. Accept no imitations on materials used either. The V2’s along with all Pro-Line wheels are molded from the Dupont nylon, the highest standards in nylon material in the market. Pro-Line Velocity V2’s, the latest in wheel technology from a company that has over 25 years of mold design, mold making, and product production.

Traxxas glow plugs are the only plugs we recommend running in our engines. This glow plug is a direct replacement in TRX 2.5, 2.5R, and 3.3 engines. Also for use in TRX Pro .15 when running in temperatures that exceed 100 degrees (F), using a high nitro content, or running higher compression.

Compatibility:

• Jato
• Nitro Rustler
• Nitro Slash
• Revo
• Slayer Pro 4X4
• T-Maxx
• TRX 2.5R
• TRX 3.3

This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. 

Features: 

• 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
• 3mm thick arm
• 27.25mm Overall length
• Linkage holes threaded for 3mm hardware
• 25T Spline Futaba/Orion/Savox/ProTek Output Shaft

Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands. 

**Compatibility with Most Trucks** 

This is a set of two Pro-Line Velocity 2.2” Rear Hex Wheels, and are intended for use with the TLR 22 and Kyosho RB5, as well as the Associated B4 and B4.1 when equipped with a 12mm hex conversion. Pro-Line has you covered with ultra-lightweight and durable rear racing wheels for the the most popular 1/10 buggies. Eliminating rotating mass in such a precision class is crucial to gaining an edge over the competition and Pro-Line’s Velocity wheels shave off several grams of weight compared to the stock wheels. The wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels also feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome look to your buggy. Pro-Line’s Velocity wheels are ready to take your buggy to the front of the pack! 

Features: 

• Ultra-lightweight design
• Latest in wheel styling and performance
• Made out of durable nylon material
• Available in White and Yellow
• Made in the USA, since 1982

Includes: 

• (2) Velocity 2.2” Hex Rear Wheels 

Compatibility:

Key Features

Overview

Tekno RC "M5" Hardened Steel 5mm Bore Mod 1 Pinion Gear. Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. With sizes ranging from 11T all the way to 30T, you are sure to find the right gear ratio for racing or those insane speed runs. The M5 set screw ensures that your gear will stay put during operation and ensure you won't strip it out when you need to remove it. The gears are CNC machined and lightened, then hardened for incredible durability and laser etched for easy identification.

Features: 

• Massive M5 set screw grips better and won't strip out
• Precisely machined and lightened for quiet and efficient operation
• Laser etched for easy identification
• Hardened steel construction
• MOD1 pitch, 5mm bore, standard length shank

Compatibility:

• Tekno RC EB48
• Tekno RC EB48.2
• Tekno RC EB48.3
• Tekno RC EB48SL
• Tekno RC ET48
• Tekno RC ET48.3
• Tekno RC SCT410
• Tekno RC SCT410.3

Overview

This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug.

Some things to keep in mind:

• The smaller the engine, the hotter the plug.
• The higher the nitro content, the colder the plug.
• The hotter the day, the colder the plug.

Compatibility:  

• O.S. Engines .18 TM
• O.S. Engines .21 B2101 Speed
• O.S. Engines .21 Speed V-Spec
• O.S. Engines .21 VZ-B V-Spec
• O.S. Engines .21 XZ-B
• O.S. Engines .21 XZ-B Speed
• O.S. Engines .21 XZ-B Speed II
• ProTek R/C Samurai 321B
• Team Orion Alpha .21
• Team Orion CRF .21
• Team Orion CRF .28
• Werks Racing .21 B2
• Werks Racing .21 B3
• Werks Racing .21 B5
• Werks Racing .21 B6

Body washers (8)

Compatibility: 

• Traxxas 4-Tec
• Traxxas Bandit
• Traxxas E-Maxx
• Traxxas Jato
• Traxxas Nitro 4-Tec
• Traxxas Nitro Rustler
• Traxxas Nitro Slash
• Traxxas Nitro Stampede
• Traxxas Rally
• Traxxas Revo
• Traxxas Rustler
• Traxxas S-Maxx
• Traxxas Slash
• Traxxas Slash 4x4
• Traxxas Slash 4x4 Ultimate
• Traxxas Slayer
• Traxxas Stampede
• Traxxas Stampede 4x4
• Traxxas T-Maxx
• Traxxas Telluride 4x4

This is a pack of four white JConcepts 83mm Bullet 1/8th Buggy Wheels. Focusing on improving stability and performance on extremely grippy track surfaces, JConcepts Bullet wheels are a lightweight, high-end race design, loaded with JConcepts style and function. The larger 83mm diameter stretches the tire sidewall, slightly flattening the tire profile giving more forward traction and tightens up the reaction felt by the driver.

The wheel features durable yet flexible inner ribbing and lightened features that help to reduce rotating weight. The outer face highlights a slightly concave shape and outer lightening “bullet” holes around the axle area. The wheels incorporate an outer glue catch that helps to channel excess glue and prevent it from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

• JConcepts 83mm design
• 4pc. included per package
• Durable, lightweight design
• Available in white and fluorescent yellow
• Superior inner rib support with lightened features
• Outer lightening “bullet” holes, functional and lightweight

Hot Racing EZ Pulls for 1/10 scale Cars body clips.

You will receive:
Four aluminum EZ Pulls
Eight body clips

Features:

Specifications:

Built Slash Tough!

The Traxxas Slash set the standard for durability, performance, and fun by which all other short course trucks are measured. The Slash 4X4 combines the best elements of the hardcore Slash 4X4 VXL with an unbeatable low price. Outfitted with the powerful Titan 12T 550 motor and bulletproof reliability of the waterproof XL-5 electronic speed control, the Slash takes on any high-flying, fender-banging, all-weather adventure you can throw at it. Grab your transmitter, rip some 4-wheel roost, and discover why nothing else is built like a Slash!

Modified Muscle

The Titan 12T 550 modified motor pumps out incredible mod-motor power with virtually maintenance-free operation, and long-lasting performance. The Titan's integrated cooling fan pulls cool air through vent tunnels molded into the motor plate to keep temperatures down. A cooler running motor equates to faster speeds, longer runtime, and extended motor life. The XL-5 Electronic Speed Control offers high current handling, EZ-Set^® one-button setup, and smooth high-frequency control. Once reserved for high-end replacement ESCs, the XL-5 comes standard with three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance. The patented Traxxas High-Current Connector opens the door for unrestricted current flow with today's high-power batteries.

4-amp DC Peak Detecting Fast Charger
For quick, convenient, hassle-free charging, a 4-amp DC fast charger is included to maximize runtime and minimize down time. The included NiMH charger uses a 12-Volt DC power outlet for universal high-output charging. The brilliant LED provides charging status as soon as the battery is connected. The charger is optimized for charging your Traxxas iD Power Cell NiMH battery. Peak-detection circuitry makes sure the battery receives a full charge every time. The status LED flashes green to indicate when charging is in progress, then turns solid green when charging is complete for foolproof charging, peak performance, and maximum runtime.

Traxxas Power Cell NiMH Battery with iD^®
Slash 4X4 includes a Traxxas iD^® Power Cell^TM Battery Pack optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and Traxxas High-Current Connectors. Traxxas iD chargers (sold separately) auto-detect iD-equipped Power Cell batteries and automatically set and optimize charge settings. Precision assembly with attractive, individually wrapped cells and clear overwrap complete the package.

100% Fully Assembled and Ready-To-Race^®

Slash 4X4 comes fully assembled and Ready-To-Race^® with the TQ 2.4GHz radio system, XL-5 electronic speed control, Titan 12T motor, painted and decaled body, pre-glued tires, and Quick Start Guide. Traxxas backs the Slash 4X4 and all of our products with top-notch support that is second to none. A staff of skilled representatives is on-hand to answer your questions via phone, website, or e-mail. Unmatched parts support allows Slash 4X4 to be serviced with parts and support from thousands of hobby dealers worldwide. Your investment is also protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra mile to ensure that your RC experience is easy and fun and fast!

MODEL 68054-1: Fully assembled, Ready-To-Drive^®, TQ 2.4GHz Radio System,
XL-5 electronic speed control, 4-amp DC Peak Detecting Fast Charger, 7-cell NiMH battery with iD^®,
and ProGraphix^® painted body.

This is Pro-Line's Velocity 4.0" Zero offset Wheels for Front or Rear. The Velocity 4.0" Dish wheels are the ultimate in lightweight durability! Pro-Line's team of enthusiasts incorporated the latest in 1:8 bead gluing for increased bonding strength. The bonding surface also has an additional texture detail in the glue channels to keep your tires on your wheels. Made to fit the 17mm hex of today's most popular 1:8 trucks! Accept no imitations on materials used either. The Velocity wheels are molded from the Dupont nylon, the highest standards in nylon material in the market. Pro-Line Velocity wheels are the latest in wheel technology from a company that has over 25 years of mold design, mold making, and product production.

Please note: All tires & wheels are sold in pairs, unless otherwise noted.

Search:
2800-02 | Velocity 4.0" Yellow Front or Rear Zero offset Wheels
2800-04 | Velocity 4.0" White Front or Rear Zero offset Wheels

This is a molded Team Associated 1/8 Buggy Wing, in Black Color. This wing comes stock with the Team Associated RC8B3 Nitro Buggy, and includes two plastic wing buttons. This wing features pre-drilled mounting holes, but features additional mounting nipples on the bottom for to drill your own if you prefer a more forward or rearward position.

Compatibility:

• Team Associated RC8B3
• Team Associated RC8B3.1
• Team Associated RC8B3.1e
• Team Associated RC8B3e
• Team Associated RC8T3
• Team Associated RC8T3.1
• Team Associated RC8T3.1e
• Team Associated RC8T3e

Pro-Line Positron 1/8 Buggy Tires are designed from the ground up with a unique and futuristic directional tread design. The Positron delivers true next generation performance with improved grip and corner speed on indoor clay tracks. The tread design pays homage to the Electron and ION tire before it with the 2 center pins boxed in by connected bars for a familiar Pro-Line signature look. From there the connected bars shoot off at angles that have been specifically designed to provide maximum Forward Bite combined with unmatched Corner Speed all while lasting longer than the competition. The Positron is directional, which adds another tuning option for the racers always looking for that extra edge since it will perform differently depending on which direction it is run. 

Features: 

• Designed for Maximum Performance
• Futuristic Directional Tread Design
• Angled Connected Bars for Maximum Forward Bite & Unmatched Corner Speed
• Improved tire wear over previous race tires
• Tune Performance by Choosing Tire Direction
• Outlast the Competition
• Made in the USA, since 1982

Specifications: 
Height: 4.31" (110mm) 
Width: 1.68" (43mm) 

Includes: 

• (2) Positron 1:8 Buggy Tires
• (2) Closed Foam Inserts 

SPUR GEARS: Traxxas offers a complete selection of 48-pitch spur gears for performance tuning.

Compatibility:

• Bigfoot® No. 1 Officially Licensed Replica
• Ford F-150 Raptor
• Rustler®
• Slash 2WD Unassembled Kit
• Slash
• Stampede®
• Accessory part for these models:
• Bandit VXL
• Drag Slash
• Rustler® VXL
• Slash VXL
• Stampede® VXL
• Bandit

This is a pair of two Pro-Line Electron 2.2" 4wd Buggy Front Tires. The Electron shares a variety of design elements with Pro-Line’s ION tire. With the dirt grabbing center tread and futuristic styling, the Electron delivers connected tire tread technology that improves traction and wear on even the most abrasive of indoor track conditions. The square center pins laid out between the connected tread provide consistent forward and side bite even when the track gets dusty. Drivers are amazed by the precision steering and super-fast corner speed that the Electrons provide.

NOTE: 2.2” Style Tires only work with 2.2” Style Wheels.

Features:

• Connected Tire Tread Technology
• Perfect tire for indoor abrasive surfaces
• Improved Traction and Wear
• Consistent Forward and Side Bite
• Precision Steering and Corner Speed
• Standard 2.2” Mounting design
• Fits 2.2” Style Wheels
• Include Closed Cell Foam Inserts
• Made in the USA, since 1982

Specifications:
Height: 3.30" (84mm)
Width: 1.26" (32mm)

Includes:

• (2) Electron 2.2” 4WD Buggy Front Tires
• (2) Closed Cell Foam Inserts

This is a Team Losi Racing Aluminum Servo Horn, intended for use with the Team Losi Racing 22 1/10 buggy.

Compatibility:

• Losi 22
• Losi 22 2.0
• Losi 22 3.0
• Losi 22 3.0 SPEC-Racer
• Losi 22SCT
• Losi 22SCT 3.0
• Losi 22T
• Losi 22T 2.0
• Losi TEN-SCTE 3.0

• Lightweight Design
• Latest in Wheel Styling and Performance
• Stiffer Wheel Improves Consistency and Lap Times
• Made With Durable Nylon Material
• Also Available in White
• Made in the USA, since 1982

This is a replacement Losi Rear Bumper Set, and is intended for use with the Losi TEN-SCTE.

Compatibility:

• Losi TEN Rally X
• Losi TEN-SCT Nitro
• Losi TEN-SCTE
• Losi TEN-SCTE 2.0
• Losi TEN-SCTE 3.0