The "Gun Metal" spray paint was developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing the model. Paint the body from the inside, keeping the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.
Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.
Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya Lexan/P S spray paint.
Mission Model 2oz Water-based RC Paint, 2 oz Bottles (Assorted Colors)
MIOMMRC-001
Regular price
$ 8.45
Sale price
$ 7.99
Save $ 0.46
/
Mission Models acrylic, non-solvent based RC paints are ideal for polycarbonate RC bodies. Triple-pigmented for maximum opacity, this paint will not fade over time and can be airbrushed straight from the bottle at 10-15 psi. The paint can also be reduced using MIOMMA-002 or MIOMMA-003 at a ratio of 2-3 drops of reducer per 10 drops of paint. Cleanup is as easy as mixing the paint! Rinse the airbrush first with water, and follow up with thinner. Available in 58 different colors and packaged in 2 oz. plastic bottles.
Regular price
$ 23.99
Sale price
$ 21.99
Save $ 2.00
/
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
incredible time savings, the drawing up of liquid is really fast
possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
less usury of the cutting blade of your precision cutter
greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
greater accuracy of airbrushing, with our liquid the color smear are no longer a problem
Pro-Line RC Body Airbrush Paint (Assorted Colors)
PRO632500
Regular price
Sale price
$ 9.99
/
The Pro-Line RC Body Paint Metallic/Pearl Color Set includes Metallic Copper, Metallic Gold, Metallic Pewter, Pearl Orange, Pearl Lime Green, and Pearl White - each specially formulated for Polycarbonate. Pro-Line’s Team of Innovators have painted literally thousands of RC car bodies over the years and now offers ready to spray R/C Body paints specially formulated to help you achieve the same jaw dropping results they do. Developed by R/C body painters for painters, this water-based airbrush paint is ultra-flexible, extremely durable and easy to use. Have the confidence that you are spraying the best! Â
Ready to Spray  This pre-thinned airbrush paint makes it easy to grab the color you want and spray without the hassle of mixing (using a 0.5mm tip @ 30psi). Â
Specially Formulated for Polycarbonate  Bash, Crash, Race or Show, Team Pro-Line has done it all! Pro-Line R/C Paint is a high-performance durable water-based airbrush paint that is specially formulated to meet the extreme requirements of polycarbonate R/C Bodies. It is durable yet flexible to allow R/C bodies to deform and come back to their shape. You will not only get great performance, you also get the same color options chosen by the experts. Â
  Features: Â
Professional Results
Developed by R/C Painters for R/C Painters
Specially Formulated for R/C Bodies
Ready to Spray. Use right out of the bottle (using a 0.5mm tip @ 30psi)
Spray Without the Hassle of Mixing
Water Based
Extremely Durable and Ultra-Flexible
Easy to Use
Many Color Options with More Yet to Come
Made in the USA, since 1982
NOTE:Â Secure lid & shake well for 30 seconds for optimum color mixture blend (using a 0.5mm tip @ 30psi)
The HF Standard Set is for those who wish to gain a more beautiful and impressive finish on their model, whether they are beginners, intermediate or experts. Comes with High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush (Ultra Fine). Brushes employ special plastic hair suitable for model painting.
This is a 2 ounce bottle of Plastruct Plastic Weld Cement. This general purpose plastic solvent cement is very tacky and works great for permanently creating bonds that set in minutes. Bonds with ABS, Styrene, Butyrate and Acrylic and more. Also works as a liquid filler. Bottle comes with applicator brush on cap.
This Basic Set is aimed at the beginner modeler. A perfect first-time modeling paintbrush set for those just starting out in the modeling world. The set features Tamiya Flat Brush No. 3, Flat Brush No. 1 and Pointed Brush (Small).
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.
Overview
Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.
Tamiya Panel Line Accent Color (Assorted Colors) (40ml)
TAM87132
Regular price
$ 7.00
/
The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner.
Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.
In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips
These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces
Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze
You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model
Overview
When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use.
Tamiya Craft Cotton Swab, Triangle Medium 50pcs-
TAM87107
Regular price
$ 4.40
/
Key Features
In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips
These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage
These swabs are great for applying decals and panel lining onto model surfaces
Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze
You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model
Overview
When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use.
Specially formulated for use on the outside of your R/C body to give a dull finish. An absolute "must have" for acheiving a weathered look for your scale project, or to get that ominous flat finish that is so popular in the "full size" car and truck scene. Reuse your window masks on the outside to keep your windows and headlights clear.
What makes Spaz Stix Ultimate Mirror Chrome so popular? Being able to see your reflection every time you look at it! Ultimate Mirror Chrome can be used as an accent, main theme, or "Candy" backer. Use it in combination with Spaz Stix Candy Colors for a colored chrome effect, or on it's own for a true chrome appearance on your bumpers, grill, and trim.
Ultimate Mirror Chrome is specifically formulated for use on polycarbonate R/C car and truck bodies. It is applied "inside" the body, and shines through the clear plastic. Ultimate Mirror Chrome MUST be backed with Spaz Stix Ultimate Black Backer for Mirror Chrome (SZX10200 or SZX10209) to achieve desired results. If the Ultimate Mirror Chrome is not backed, it will wipe away easily, and will have no durability.
When using Ultimate Mirror Chrome on an "external" application, or surface other than polycarbonate, it must be applied over a base coat of the Ultimate Black Backer. It will be necessary to seal the Chrome with Spaz Stix Ultimate Clear Coat (SZX10900 or SZX10909). Apply clear coat in very light coats, with ample drying time between coats. Applying too much clear at once will turn the Chrome into a grey color. Please note: It is difficult to achieve the full reflective qualities of this paint when used externally. ALWAYS practice on a scrap piece before proceeding with your project.
Pro-Line RC Body Paint Reducer was developed as an additive to be used with Pro-Line RC Body Paint. This can be used to optimize paint flow when using a .35mm tip, or as an airbrush cleaner, to prep the brush between colors.
Features:
Add to paint for optimized flow for smaller tips (.35mm) and other specific applications
