Motors/Engines



Traxxas Titan 550 Size Motor (12T) **

Traxxas Titan 550 Size Motor (12T) **

$ 25.95 Save $ 0.05

This is a replacement Titan 12 turn 550 size electric motor from Traxxas. Compatibility: Traxxas 1/16 Grave Digger Traxxas Bandit Traxxas Rustler Traxxas Slash Traxxas Stampede Traxxas Telluride 4x4

Yeah Racing 30x30x10mm Tornado High Speed Fan **

Yeah Racing 30x30x10mm Tornado High Speed Fan **

$ 7.59

This is the Yeah Racing 30x30x10mm Tornado High Speed Cooling Fan in Black, Blue or Orange color. This fan features dual ball bearings and is great for motors, ESC's and multiple other applications. This fan is capable of use with a 2S LiPo (8.4V), but no higher.  Specifications: Dimensions: 30x30x10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: approx. 14,000 RPM Max Air Flow: 5.501 CFM Current: 0.28A Weight: 9.0g Connector: JST Note: For the best performance, Yeah Racing recommends you continuously run this fan for 2 - 3 hours to break it in. (BLACK)  ...

Options
Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

Traxxas Super-Duty Long Glow Plug (2.5 & 3.3) **

$ 7.00

This is one Traxxas super duty long glow plug for engines that accept long shaft plugs (basically any engine except OS engines). This is a medium hot glow plug intended for use in Traxxas TRX2.5 & TRX3.3 race engines that come with the Traxxas T-Maxx and Traxxas Revo monster trucks. This is the standard plug recommended by Traxxas.  Compatibility: Traxxas Nitro Slash

ProTek RC Braided Brushless Motor Sensor Cable (150mm) **

ProTek RC Braided Brushless Motor Sensor Cable (150mm) **

$ 5.49 Save $ 0.06

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.  The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a...

Yeah Racing 30x30x10mm Aluminum "Tornado Plus" High Speed Cooling Fan **

Yeah Racing 30x30x10mm Aluminum "Tornado Plus" High Speed Cooling Fan **

$ 16.99

This is the Yeah Racing 30x30x10mm Aluminum "Tornado Plus" High Speed Cooling Fan. This fan features a full aluminum case to help dissipate heat in hot conditions. Plus, the aluminum case helps to improve durability as well. dual ball bearings and is great for motors, ESC's and multiple other applications. The case has a small relief in the side to allow the fan case to sit flush, and the board is exposed to allow easy re-wiring. Plus, this fan is...

ProTek RC Braided Brushless Motor Sensor Cable (90mm) **

ProTek RC Braided Brushless Motor Sensor Cable (90mm) **

$ 4.99

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.  The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a...

Hobbywing XERUN SCT 3660SD G2 Sensored Brushless Motor (4300kV) (w/5mm shaft) **

Hobbywing XERUN SCT 3660SD G2 Sensored Brushless Motor (4300kV) (w/5mm shaft) **

$ 89.99 Save $ 36.01

This is the Hobbywing XERUN SCT 3660SD G2 Sensored Brushless Motor. This 4-pole power house is great for heavy-duty short course, truck and monster truck sensored applications. Note: Because this motor features a 5mm diameter motor shaft, it requires pinion gears with a 5mm bore.  Features:  Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners. Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with...

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

ProTek RC O.S. P3 Samurai 321B Turbo Glow Plug (Ultra Hot) **

$ 7.99

This is the ProTek R/C O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug. Some things to keep in mind: The smaller the engine, the hotter the plug. The higher the...

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

ProTek RC 1/8 Scale .21 & .28 High Temp Silicone Exhaust Manifold Gasket (2) **

$ 8.99

This is a pack of two ProTek R/C "High Temp" 1/8 Scale Silicone Exhaust Manifold Gaskets. These are the gaskets supplied with the Samurai 321B engine and tuned pipes. These high temp gaskets are perfect for nitro competition or heavy use.   The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time...

ProTek RC Braided Brushless Motor Sensor Cable (300mm) **

ProTek RC Braided Brushless Motor Sensor Cable (300mm) **

$ 5.99

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.  The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a...

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines) **

ProTek RC T3 Ultra Hot Turbo Glow Plug (.12 and .21 Engines) **

$ 6.99

The ProTek T3 Ultra Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T3 "Ultra Hot" heat range plug is recommended for .12 to .21 size engines running 10 - 36% nitro in colder climates. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot" plug recommended for .12...

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long) **

ProTek RC 3.5" 1/8 Exhaust Manifold Spring (2) (Long) **

$ 3.59 Save $ 0.41

This is a set of two ProTek R/C Long Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Springs attach the tuned pipe manifold to the engine exhaust port. With the manifold springs wrapping around the engine, over time they tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the manifold springs weaken and become vulnerable to breaking which can lead to manifold gasket damage;...

ProTek RC Braided Brushless Motor Sensor Cable (200mm) **

ProTek RC Braided Brushless Motor Sensor Cable (200mm) **

$ 5.49

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.  The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a...

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black) **

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black) **

$ 16.99 Save $ 1.00

The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash.  The fan is a true 2S HV component, that has been built to last with...

Hobbywing Xerun 4274SD G2 Sensored Brushless Motor (2250kV) **

Hobbywing Xerun 4274SD G2 Sensored Brushless Motor (2250kV) **

$ 139.99 Save $ 57.01

This is the Hobbywing 4274SD G2 Sensored Brushless Motor from Hobbywing, suited for us with most 1/8 Off-Road Buggy and Truggy options.  Full-Sensored Mode The first motor (in the world) with a built-in chip which helps the ESC identify it's a Hobbywing motor (when pairing with XERUN XR8/XR8 Plus) and form a power system which can work in the "Full-Sensored" mode to provide users with improved performance and smoother control. Note: this motor is also applicable to other ESCs, but it cannot work...

Trinity D8.5 1/8 Off Road Brushless Motor (2000Kv) **

Trinity D8.5 1/8 Off Road Brushless Motor (2000Kv) **

$ 154.99

Trinity D8.5 2000Kv 1/8 Off Road Brushless Motor.  Features: High Torque Stator Design 4 Pole Rotor Design with Multi Point Rotational Sensor Pickups Dual Sensor Ports 5mm Shaft Oversized Precision Bearings Four 4mm Mounting Holes & Two 3mm Holes Heavy Duty Low Resistance Solder Tabs Grooved Can Design allows for More Surface Area thus Cooler Running Temperatures 42mm Diameter 72mm Length 352 Grams (avg) Available in Three KV Power Levels 1700kv, 2000kv & 2300kv Optional Fan Mount with 40mm Fan...

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (12) **

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (12) **

$ 20.49 Save $ 1.90

This is a pack of twelve ProTek R/C "DustBuster 2" Mugen MBX7 Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it takes to burn through a tank...

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short) **

ProTek RC 0.63" 1/8 Exhaust Manifold Spring (3) (Short) **

$ 3.59

This is a set of three 0.63" or 5/8" ProTek R/C Short Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. These Exhaust Manifold Springs attach the tuned pipe to the tuned pipe manifold. These springs tend to lose their resiliency as they absorb the intense heat from the engine. As this happens, the springs weaken and can become loose which can lead to gasket damage or leaks. Specifications: Length: 0.63" (15.8mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

Ultimate Racing Pre-Oiled Dual Staged Foam Air Filter (Losi/Serpent) (12 PCS) **

Ultimate Racing Pre-Oiled Dual Staged Foam Air Filter (Losi/Serpent) (12 PCS) **

$ 21.00

This is the Ultimate Racing pre-oiled dual-stage foam air filter, and it's been specially designed for use with Losi 8ight / Serpent S811 Cobra air filters. The combination of this pre-oiled dual-stage foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces pre-oiled and safely stored in a double zipper bag, so can be stored for...

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2) **

ProTek RC 1/8 Scale .21 & .28 Silicone Exhaust Manifold Gasket Set (Black) (2) **

$ 5.99

This is a set of two ProTek R/C Silicone Exhaust Manifold Gaskets, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Gasket seals the fitting between the engine port and exhaust manifold and also the fitting between the exhaust manifold and tuned pipe. With the silicone exhaust gasket sandwiched between these hard metal pieces, over time the gasket tends to lose it resiliency as it absorbs the intense heat and vibrations from the engine. As this...

Dynamite Flexible Sensor Wire, 125mm **

Dynamite Flexible Sensor Wire, 125mm **

$ 6.99

Dynamite Flexible Sensor Wire, 125mm

Castle Creations Fan Shroud w/Fan **

Castle Creations Fan Shroud w/Fan **

$ 15.25 Save $ 0.75

This is the Castle Creations Fan Shroud, intended for use with Neu-Castle 15 series motors, as well as motors that have outside diameters between 1 1/2" and 1 7/8". Pushing your Mamba Monster to the max? Just the type who likes the motor as cool as possible? No matter which category you fall under, Castle has the solution! The fan plugs directly into your receiver for power, and can drop motor temperatures as much as 30 degrees!* A must have for...

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines) **

ProTek RC T4 Hot Turbo Glow Plug (.12 and .21 Engines) **

$ 6.99 Save $ 0.01

The ProTek T4 Hot Turbo Glow Plug was developed to provide nitro enthusiasts with an affordable, general purpose turbo plug. The T4 "Hot" heat range plug is a good general purpose plug recommended for .12 to .21 size engines running 10 - 36% nitro in most climate conditions. Heat Range Options:  PTK-2550: T3 Turbo Plug, "Ultra Hot" plug recommended for .12 to .21 size engines running 10 - 36% nitro in cold conditions.  PTK-2551: T4 Turbo Plug, general purpose "Hot"...

Ultimate EFRA 2141 Off Road Super Strong Pipe Set w/ Fast Lock System Manifold **

Ultimate EFRA 2141 Off Road Super Strong Pipe Set w/ Fast Lock System Manifold **

$ 90.00

Ultimate Racing presents the FAST-LOCK system for connecting the exhaust pipe to the manifold without the pipe/manifold springs. This FAST-LOCK connecting system is stronger and safer than the traditional springs system, it ensures perfect pipe-manifold alignment and improves engine performance. Assembly and operation is very easy. The manifold is fixed to the pipe by turning a quarter turn. The manifold comes with an inner silicone O-ring and an outer silicone gasket that ensures a perfect sealing. We suggest to lubricate...

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium) **

ProTek RC 1.25" 1/8 Exhaust Manifold Spring (2) (Medium) **

$ 3.59

This is a set of two ProTek R/C 1.25" Medium Length Exhaust Manifold Springs intended for use with 1/8 scale nitro engines with mounting tabs on the both sides of the engine case. These springs attach the tuned pipe manifold to the engine case using the spring tabs; if you're engine does not have spring tabs you will need the wrap around style long springs (PTK-7100). Specifications: Length: 1.25" (34mm) Thickness: 0.16" (4mm) Available Sizes: PTK-7101: 0.63" (15.8mm) PTK-7102: 1.25"...

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (6) **

ProTek RC "DustBuster 2" Mugen MBX8 & MBX7 Pre-Oiled Air Filter Foam (6) **

$ 13.75 Save $ 0.24

This is a pack of six ProTek R/C "DustBuster 2" Mugen MBX7 Pre-Oiled Air Filters. In the unforgiving world of 1/8 scale off road, something as simple as the air filter can be the difference between success and failure. The air filter system is the only thing preventing dirt and other contaminants from getting pulled into your vehicles engine. This small component could become the source of an expensive problem in the time it takes to burn through a tank...

Hobbywing Xerun V10 G3 Competition Modified Brushless Motor (7.5T) **

Hobbywing Xerun V10 G3 Competition Modified Brushless Motor (7.5T) **

$ 94.99 Save $ 38.01

This is the 7.5 Turn Hobbywing Xerun V10 G3 Competition Modified Sensored Brushless Motor. The V10 G3 Motor line has seen significant improvements over the previous G2 series, for both the Modified and Stock motors. Some updates include an updated can design that promotes easy of maintenance, a special shell design for maximized cooling, high-performance stator core, heat-resistant wire (200°C), lower weight and more.   Features:   Specially designed for high-level racing.  Lightweight: The G3 Modified & Stock motors only weigh 161g...

Castle Creations Sidewinder SCT Waterproof Combo w/Sensored 1410 Motor (3800Kv)  **

Castle Creations Sidewinder SCT Waterproof Combo w/Sensored 1410 Motor (3800Kv) **

$ 120.99 Save $ 31.96

This Castle Sidewinder SCT Waterproof Combo includes the Sensored 1410 3800Kv Motor and is a great choice for 1/10 scale short course trucks up to 6.5 pounds on 2S, as well as 1/10 buggies and trucks up to 4 pounds on 2 or 3S. The Sidewinder SCT is Castle’s solution for anyone who needs an unbeatable combination of power and affordability in a special edition controller and motor combo made for Short Course Truck racing. While the sensored capabilities of...

Yeah Racing 40x40x10mm Tornado High Speed Cooling Fan

Yeah Racing 40x40x10mm Tornado High Speed Cooling Fan

$ 7.99 Save $ 0.80

This is the Yeah Racing 40x40x10mm Tornado High Speed Cooling Fan in Black color. This fan features dual ball bearings and is great for motors, ESC's and multiple other applications. This fan is capable of use with a 2S LiPo (8.4V), but no higher.  Specifications: Fan Size: 40x40x10mm Operating voltage: 5-8.4V Start-up voltage: 3V Weight: 13.0g Material: Plastic Blade and Frame Housing Bearing: Dual ball Shaft Core: Stainless steel Wire Length: 250mm Connector: JST 

Trinity X Factor 6.0T Modified Motor

Trinity X Factor 6.0T Modified Motor

$ 104.99 Save $ 45.00

Features: 10% Lighter than Previous Motors  Weight (158g avg) New Sensor Board Design. 0 - 60 Degrees of Timing adjustment  Revolutionary timing ring & locking end plate systems saves weight   X-Flow Cooling which pulls more air through the can, reducing motor temps  2pc CNC Machined Aluminum can allows for more accurate deviation reading NEW 90 Degree Solder Tabs   

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set **

ProTek RC .21 & .28 Engine Carburetor Exhaust & Fuel Inlet Cap Set **

$ 2.99

This is a replacement ProTek R/C .21 & .28 Engine Carburetor, Exhaust and Fuel Inlet Caps Set. This set includes a 3mm banjo fitting cap, 16mm carburetor cap, and a 17mm exhaust cap. Compatibility:  PROTEK R/C SAMURAI 321B